TIHOOD 2PCS GPS Windshield Mount Holder for Garmin Nuvi Suction
Quick take
This TIHOOD 2PCS windshield suction mount is built to replace a Garmin Nuvi car mount with a ball-and-socket connection and windshield placement. Buyers mainly use it to restore a working in-car navigation setup, and many like having a second mount as a backup. The main caveat is that suction mounts can loosen over time, so your results may depend on windshield conditions and how the mount is handled.
Pros and cons
Pros
- Made for Garmin Nuvi models that match the swivel ball socket style (specific Nuvi line compatibility is listed).
- Ball-and-socket design lets you clip in and adjust the viewing angle.
- Windshield suction installation, no tools required, designed to be easy to install and remove.
- Includes two mounts, which can help if you move between vehicles or want a spare.
Cons
- Some buyers report needing replacements, suggesting suction adhesion or connection tightness may be inconsistent over time.
- The ball end may feel looser than an original mount for some setups, which can matter on rough roads.
- It’s a suction mount only, the bracket for the Garmin device is not included.
What buyers think
Buyer-review evidence for this mount is generally positive, with many comments focused on it working as a straightforward replacement. Several shoppers describe it as an easy swap that matches the original style and restores functionality. People also appear to value the “two-pack” format, with some using the second mount as a backup after prior mount parts failed or loosened. A smaller theme is that the ball connection or suction behavior may be less firm than a previous original mount, which can affect stability on bumps, though not every buyer mentions this issue. Overall, review evidence suggests it’s a practical option if you’re specifically replacing a Garmin Nuvi windshield suction mount, but performance consistency can depend on how well the mount holds to your windshield over time.
Who this mount is for
- You need a Garmin Nuvi windshield suction mount replacement that uses the ball-and-socket connection style.
- You want an adjustable viewing angle for comfortable navigation viewing while driving.
- You’d like a spare mount for switching between vehicles or as a backup if the mount assembly wears out.
- You prefer simple installation (no tools) and an easy on and off setup.
Compatibility and connection style
This mount is designed specifically for a wide set of Garmin Nuvi and related models that fit the listed swivel ball socket format. The mounting system uses a ball-and-socket approach, allowing the GPS to be angled into a desired viewing position. If your current Garmin Nuvi mount uses a similar ball head socket on the bracket side, this suction mount can be a direct style replacement.
Important: this purchase is for the suction mount holder itself. The Garmin bracket that holds your device is not included, so you’ll want to confirm your existing bracket is still compatible with a ball-head connection.
Design and key specs that matter
- Mount type: Windshield suction cup holder (windshield mounting).
- Adjustment: Ball-and-socket style, designed for easy angle positioning.
- Size: Approx. 2.2 inch diameter and 2.5 inch height.
- Material: Plastic enclosure material.
- In the box: 2 x car suction cup holders for universal Garmin GPS suction mounting (bracket not included).
Pros and cons, in plain English
When it’s a good fit
- You’re replacing a similar Garmin Nuvi windshield mount and want the same general functionality, not a new mounting ecosystem.
- You drive on mixed roads and want an adjustable angle rather than a fixed mount position.
- You want a double pack so you can keep one mounted and one ready, or you switch between vehicles.
When you should be cautious
- If your past mounts have loosened on your windshield, treat suction mounting as an area to verify. Results can vary based on windshield texture, temperature, and how the mount is seated and locked.
- If stability is critical on your commute, pay attention to feedback that the ball end can be looser than some originals, which may affect how the device holds during bumps.
Value vs. the tradeoffs
This is positioned as an affordable, practical replacement mount, and the two-pack format strengthens the value if you expect you might need an extra mount later. The main tradeoff is that suction-based systems are inherently dependent on adhesion quality over time, and some buyers mention loosening behavior that can lead to needing a replacement. If you’re comfortable using the mount as a replacement part for a specific Garmin Nuvi system, it can be a cost-effective route.
How to choose the right mount instead
If you’re shopping beyond this exact model, compare options using these factors:
- Device compatibility: Does the mount match your Garmin’s bracket connection style (ball-and-socket format)?
- Mounting location: Windshield suction is convenient, but ventilation and temperature swings can affect adhesion.
- Stability needs: If you want maximum resistance to movement, compare mounts designed for stronger retention or alternative mounting methods (when compatible).
- Adjustment: Look for a mount that allows angle changes without excessive looseness.
- Pack size: Two-pack options can be helpful if you want a backup or frequently move between cars.
Verdict
The TIHOOD 2PCS GPS windshield mount is a sensible replacement choice for Garmin Nuvi owners who want an adjustable ball-and-socket suction mount without buying a whole new mounting setup. The inclusion of two mounts is a standout practical benefit. The key thing to consider before you commit is suction and connection stability over time, since some buyers note loosening compared with an original mount and needed replacements.
FAQ
Is the TIHOOD 2PCS GPS windshield mount compatible with all Garmin Nuvi devices?
It’s intended for many Garmin Nuvi models that fit the listed swivel ball socket style. Check that your specific Nuvi model and the connection type match, and note that this kit is for the suction mount holder only.
Does this include the bracket that holds my Garmin device?
No. This set includes the suction cup mount holders, but the bracket (the part that connects to and supports the GPS device) is not included.
Is it easy to install and remove?
Yes. The mount is designed for windshield suction mounting with no tools required, and it’s intended to be easy to install and remove.
Will the suction mount hold securely on the windshield?
Many buyers report it working well as a replacement, but suction mounts can vary in how firmly they adhere over time depending on windshield conditions and usage. If you’ve had suction issues before, consider the two-pack as a practical backup approach.
Why are there two mounts in the package?
The two-pack format is useful if you want a spare for another vehicle, or if your existing suction mount needs replacing.
Specifications
| Product Title | TIHOOD 2PCS GPS Windshield Mount Holder for Garmin Nuvi Suction Cup Car Windscreen |
|---|---|
| Category | Electronics > GPS, Finders & Accessories > GPS System Accessories > Vehicle Mounts |
| Brand | TIHOOD |
| Manufacturer | TIHOOD |
| Model Name | 775185105252 |
| Model Number | 775185105252 |
| Color | Black |
| Item Weight | 0.15 Pounds |
| Compatible Devices | Garmin |
| Compatible Phone Models | Garmin Nuvi,Garmin Nuvi. |
| Mounting Type | Windshield |
| Additional Features | Rotatable |
| Compatible with Vehicle Type | Automobile |
| Enclosure Material | Plastic |
| UPC | 775185105252 |
| Mfr Part Number | 775185105252 |
Recommended next
Garmin 010-10908-02 Portable Friction Mount
The Garmin 010-10908-02 is a portable dash friction mount designed to hold compatible Garmin nüvi and StreetPilot devices securely on stable surfaces. It focuses on quick in-and-out mounting, adjustable viewing angles, and a grip-on-dash approach that avoids common windshield suction issues.
RAM MOUNTS AMPS Round Plate Ball Mount Base – B Size 1" (RAM-B-202U)
The RAM-B-202U is a compact B-size RAM ball mounting base with a 2.5-inch round AMPS plate for building flexible vehicle, marine, or kayak accessory setups. It is made from powder-coated marine-grade aluminum and is designed to pair with B-size RAM double-socket arms for near-infinite adjustment, with a straightforward caveat: proper alignment and hole matching depend on your specific device or adapter.
RAM Mounts Double Socket Arm, Standard Length C Size 1.5" Ball Connector Arm (RAM-201U)
The RAM-201U is a medium-length double socket arm for C-size (1.5") RAM ball systems, built from powder-coated marine-grade aluminum. It’s designed for quick, tool-light adjustment and repeatable positioning, with a spring-assisted ball connection and published standard/heavy-duty weight limits for mounting accessories like electronics, camera gear, or transducer setups.
Thinkware GPS Antenna for X1000/X700, F200 PRO/FA200, ARC
A simple windshield-mount GPS antenna made for Thinkware dash cams that support ARC logging. It’s designed to add time, speed, and location context to your recordings, with an easy install and a built-in 10-inch cable. Main caveat: it only makes sense if you have a compatible Thinkware model that uses ARC GPS logging.