The VoIP Lounge Replacement 9 Foot Short Black Handset Receiver Cord for Polycom VVX Series IP Phone
Quick take
This replacement handset receiver cord is made for Polycom VVX series IP phones, with a black, round cable and a 4p4c (4-pin) male-to-male connector. It is offered as a “9 foot” cord, where that length refers to the fully stretched cord, not the shorter coiled length in packaging. It is a solid buy if your existing handset cord is worn, stiff, or no longer connects reliably, but make sure the cord length matches how your desk setup uses the handset.
Pros and cons
Pros
- Designed for Polycom VVX series IP phones (models listed for VVX 101, 150, 201, 250, 300, 301, 310, 311, 350, 400, 401, 410, 411, 450, 500, 501, 600, 601, 1500).
- 9-foot fully stretched length, with an approximately 15-inch coiled length when packed, plus extra long lead.
- Flexible, and buyers report it maintains shape.
- Looks and fits like the original replacement cord.
Cons
- Cord length can be confusing, since “9 feet” means fully stretched, not the coiled length.
- Long-term longevity is less proven in the available review snippets (durability beyond replacement fit is harder to confirm).
What buyers think
Buyer-review evidence is largely consistent that this cord works as a straightforward replacement and restores phone operation when a prior cord stops functioning. Several snippets highlight a flexible, shape-retaining feel, and that the replacement looks and fits like the original handset cord. Review evidence is limited on longer-term durability, so it is best treated as a replacement you install for functional compatibility first, with longevity expected but not strongly demonstrated in the snippets.
What this cord is, and what it’s for
This is a handset receiver cord replacement intended for Polycom VVX series IP phones. It uses a 4p4c connector (4-pin modular type) and a male-to-male connection, matching typical handset cord wiring for supported VVX models. If your handset cord is damaged, stretched out, or no longer provides consistent connectivity, swapping in a matching replacement is often the quickest path to getting your desk phone back to normal operation.
Cord length details that matter (fully stretched vs coiled)
One of the biggest practical considerations is how far the handset needs to travel during everyday use. The product is marketed as a 9-foot cord with an approximately 15-inch coiled length when packaged. In other words, the “9 feet” is the fully stretched measurement, while you will likely see a much shorter coil right after unpacking.
This matters if your phone base is mounted closer to your desk edge, or if you tend to swing the handset away from the base. If you often use the handset at maximum reach, “fully stretched” length is the useful reference point.
Compatibility checklist before you buy
To avoid a mismatch, confirm the following:
- Your phone model is in the supported Polycom VVX range (101, 150, 201, 250, 300, 301, 310, 311, 350, 400, 401, 410, 411, 450, 500, 501, 600, 601, 1500).
- You need a handset receiver cord with a 4p4c (4-pin) modular connection.
- You want a 9-foot fully stretched length, not just the coiled length you see in packaging.
Pros and cons (buyer-fit perspective)
Who it’s best for
- You need a replacement handset cord for a Polycom VVX series phone and want a matching look and fit.
- You prefer a flexible cord feel that does not collapse into an unusable shape.
- Your workspace calls for a 9-foot fully stretched handset reach.
Who should consider a different length or option
- You need a shorter handset cord range, because “9 feet” is measured fully stretched, and that extra reach can mean more slack on a tight desk setup.
- You are unsure about how much handset length you actually need, since the packed coil length is not the same as the stretched working length.
Is it worth it?
If your goal is to replace a worn or malfunctioning handset receiver cord on a compatible Polycom VVX model, this cord is designed for the job: it matches the supported VVX lineup and uses the expected 4p4c connection. The review snippets strongly suggest functional replacement value, with buyers reporting restored operation and a good fit that resembles the original cord. The main buying caveat is cord-length expectations, so double-check the fully stretched versus coiled measurement before ordering.
FAQ
How long is the handset cord when it is fully stretched?
It is listed as 9 feet fully stretched, and about 15 inches when coiled (as packaged).
Is this replacement compatible with Polycom VVX phones?
It is intended for Polycom VVX series IP phones across the supported model list (including VVX 101, 150, 201, 250, 300, 301, 310, 311, 350, 400, 401, 410, 411, 450, 500, 501, 600, 601, and 1500).
What connector type does it use?
It uses a 4p4c (4-pin) modular connector, with a male-to-male connection.
Will this work if I only see the coiled length?
Yes, because the relevant measure for desk reach is the fully stretched length. The coiled length you see right after unpacking is shorter than the working reach.
Does it look and fit like the original cord?
Review snippets indicate it looks and fits like the original replacement handset cord.
Is the cable tangle-free?
It is described as tangle-free, and buyers mention a flexible feel that maintains shape.
Specifications
| Product Title | The VoIP Lounge Replacement 9 Foot Short Black Handset Receiver Cord for Polycom VVX Series IP Phone 101 150 201 250 300 301 310 311 350 400 401 410 411 450 500 501 600 601 1500 |
|---|---|
| Category | Electronics > Accessories & Supplies > Telephone Accessories > Telephone Cords |
| Brand | The VoIP Lounge |
| Manufacturer | The VoIP Lounge |
| Color | Black |
| Connector Type | 4p4c |
| Cable Type | Telephone |
| Compatible Devices | Polycom VVX Series IP Phones |
| Other Special Features of the Product | Tangle Free |
| Compatible Phone Models | Polycom VVX Series IP Phones: 101, 150, 201, 250, 300, 301, 310, 311, 350, 400, 401, 410, 411, 450, 500, 501, 600, 601, 1500 |
| Connector Gender | Male-to-Male |
| Data Transfer Rate | 10.8 Gigabits Per Second |
| Number of Pins | 4 |
| Indoor Outdoor Usage | Indoor |
| Item Shape | Round |
| Brand Name | The VoIP Lounge |
| Model | VVXHSC9 |
| Part Number | VVXHSC9 |
| Unit Count | 1.0 Count |
| Number of Items | 1 |
| Special Feature | Tangle Free |
Recommended next
moeverEX Phone Extension Cord 25 Ft, Telephone Cable with Standard RJ11 Plug and 1 in-Line Couplers and 20 Cable Clip Holders, White
The moeverEX 25 ft phone extension cord is a simple, budget-friendly way to move a landline, fax, modem, or answering machine further from a wall jack. It uses an RJ11 connection with an inline coupler and includes adhesive cable clips to keep longer runs cleaner.
15FT Telephone Extension Cord Cable, Landline Phone Line Wire with RJ11 6P4C Plugs, Includes Cable Clips - Black - 2 Pack
A simple 15-foot, RJ11 6P4C landline extension cord kit (2-pack) for stretching your phone, modem, or fax setup, with cable clips included to help keep runs tidy. Buyers generally report it works as expected, is easy to use, and offers good value, with limited drawbacks beyond basic “straight cord” expectations.
Phone Cable 300ft Rounded Black Roll (100m Long) 4x1/0.4 26 review
A 300 ft (100 m) bulk roll of 4-wire, 26 AWG solid copper telephone cord designed for DIY runs in walls or between devices. It’s compatible with RJ11/4P4C and other common modular plug formats, but you will need to terminate it yourself (modular plugs are not included).
KINXIYU Telephone Handset Cord Detangler 2 Sets, 2 Pack Landline Handset Cord Cable (7.5Ft Uncoiled, 1.5 Ft Coiled) and Anti-Tangle Telephone Cord Untangler with 360° Swivel
This 2-pack KINXIYU handset cord detangler set is designed to stop coiled landline handset cords from twisting and tangling by adding a 360-degree rotating swivel. It’s built for RJ9/RJ10/RJ22 (4P4C) handset jacks and includes two 7.5 ft handset cords, making it a convenient option for desk phone setups that need cleaner, more manageable cable routing.