The VoIP Lounge Replacement 12 Foot Black Handset Cord for Polycom VVX Series IP Phone
Quick take
This is a replacement handset cord for Polycom VVX Series IP phones, designed to give you more desk flexibility with a 12-foot fully stretched length (about 22 inches when coiled). It is best for setups where the handset needs extra reach, but you need to pick the right length based on how the cord will sit (coiled vs stretched).
Pros and cons
Pros
- 12 feet fully stretched reach, with about 22 inches coiled in storage
- Made to match Polycom VVX Series IP phone handset compatibility
- Black color and 4p4c, 4-pin connector style for handset cord replacement use
- Buyer comments frequently mention the extra length and that it works as expected
Cons
- Cord length is measured when fully stretched, so desk fit depends on how you route and store the coiled slack
- Compatibility is specific to the listed Polycom VVX models, so it is not a universal handset cord for other brands
What buyers think
Buyer-review evidence is limited but consistent on a few decision factors. Several buyers highlight that the added handset reach helps them move farther from the base or desk area. Others describe the cord as working as described, with basic usability like not being kinked and staying functional for everyday calls. A few comments also mention low noise during listening and tangle resistance, but those points are not backed by many distinct review themes. Overall, the feedback supports the idea that this is a practical replacement cord when length and compatibility are the priority.
What this cord is for
This handset cord is intended to replace a worn, missing, or incompatible receiver lead on Polycom VVX Series IP phones. If your current handset cable is too short for your workspace, replacing it with the 12-foot option can make it easier to route the handset comfortably without stretching the cable tight.
Key specs that matter for buying
Length: 12 feet fully stretched (about 22 inches coiled)
The cord length is listed as industry-standard “fully stretched” length. In practice, that means what you see in the box or on the desk will usually be the coiled length, not the maximum reach. If you tend to keep the handset on a station cradle with the cable loosely laid, the fully stretched length gives you extra routing options. If your desk is very tight, you may prefer a shorter length so you do not end up with excessive slack.
Connector type
It uses a 4p4c connector style (4 pins) for handset cord connections, with male-to-male ends. This matters when you are verifying that your phone’s handset port and the replacement cord’s plug style match.
Compatibility scope
It is designed for Polycom VVX Series IP phones including models such as 101, 150, 201, 250, 300, 301, 310, 311, 350, 400, 401, 410, 411, 450, 500, 501, 600, 601, and 1500. If you have a different brand or a different phone family, this specific cord may not fit.
Pros and cons, translated into real-world use
Best for
- Anyone replacing a receiver cable on a compatible Polycom VVX model
- Workstations where you need more handset reach to comfortably answer calls
- Buyers who want a black cord that blends in with typical office phone setups
Consider first
- If your desk layout is compact, double-check whether you really need the 12-foot stretched length, since coiled slack can be awkward if it has nowhere to go
- If you are not sure of your exact phone model, confirm the phone family before ordering to avoid a plug mismatch
Is it worth it?
If you have the right Polycom VVX model and you specifically want extra handset cable reach, this replacement cord is a sensible, low-complexity upgrade. The buying value is mainly about restoring reliable handset connectivity and giving you the routing freedom you need. The biggest “gotcha” is length measurement, so think about how your handset sits on its cradle and how much slack you want on the desk.
FAQ
Common questions
Will this handset cord work with my Polycom VVX phone?
It is intended for Polycom VVX Series IP phones in the listed model range (including 101, 150, 201, 250, 300-series, 400-series, 500-series, 600-series, and 1500). If your model is not in that list, you should verify compatibility before purchasing.
How long is the cord in actual use, coiled or stretched?
The cord is rated at 12 feet fully stretched, with approximately 22 inches when coiled. That means the “maximum reach” differs from how much cable you will typically see while it is coiled or laid on the desk.
What connector type does it use?
It uses a 4p4c, 4-pin handset cord connection with male-to-male ends. This plug style is important for matching the handset port on your phone base.
Is the cable meant to be tangle resistant?
The product emphasizes tangle-free behavior, and some buyer comments mention that it resists tangling. Still, how well it stays organized depends on how you route and store the slack on your desk.
Can I use it to replace any telephone handset cord?
No, this replacement is targeted to the Polycom VVX Series IP phone models listed. It is not positioned as a universal handset cord across different brands and phone families.
Specifications
| Product Title | The VoIP Lounge Replacement 12 Foot Black Handset Cord for Polycom VVX Series IP Phone 101 150 201 250 300 301 310 311 350 400 401 410 411 450 500 501 600 601 1500 |
|---|---|
| Category | Electronics > Accessories & Supplies > Telephone Accessories > Telephone Cords |
| Brand | The VoIP Lounge |
| Manufacturer | The VoIP Lounge |
| Model Name | VVXHSC12 |
| Color | Black |
| Connector Type | 4p4c |
| Cable Type | Handset Cord |
| Compatible Devices | Polycom VVX Series IP Phones: 101, 150, 201, 250, 300, 301, 310, 311, 350, 400, 401, 410, 411, 450, 500, 501, 600, 601, 1500 |
| Other Special Features of the Product | Tangle Free |
| Compatible Phone Models | Polycom VVX Series IP Phones: 101, 150, 201, 250, 300, 301, 310, 311, 350, 400, 401, 410, 411, 450, 500, 501, 600, 601, 1500 |
| Connector Gender | Male-to-Male |
| Number of Pins | 4 |
| Maximum Voltage | 60 Volts (DC) |
| Connectivity Technology | Handset cord |
| Indoor Outdoor Usage | Indoor |
| Item Shape | Round |
| Brand Name | The VoIP Lounge |
| Customer Package Type | Standard Packaging |
| Model | VVXHSC12 |
| Part Number | VVXHSC12 |
| Unit Count | 1 Count |
| Number of Items | 1 |
| Special Feature | Tangle Free |
Recommended next
SOUTHWESTERN BELL S60067 White Handset Cord 12 Feet
The SOUTHWESTERN BELL S60067 is a 12-foot white coiled modular handset cord for landline phones. Buyers generally find it a straightforward replacement that restores a secure connection, with the main tradeoff being that shipping can make the total cost feel high versus the cord’s low price.
Phone Jack Splitter for Landline Telephone RJ11 6P4C 2 Way Adapter (1 Splitter + 2.5 Inch Cable) Made in USA
This RJ11 6P4C phone jack splitter expands one landline wall jack into two ports using a compact design with a short detachable 2.5-inch cable. It is a practical choice when you need more connection points for a landline phone, fax, or modem setup, with buyer feedback pointing to clear performance and solid build quality.
NECABLES 1+1Pack Phone Jack Splitter 5 Way RJ11 6P4C (1 Male to 5 Females) + Telephone Line Coupler
A budget-friendly RJ11 phone jack splitter that takes one landline/fax/modem line and provides multiple RJ11 outputs. It is best for sharing the same line among several devices, with the main caveat that you generally cannot make two separate calls at once.
iSoHo Phones Phone Cord for Landline Phone (Bone Ivory, 15 ft)
A coiled, tangle-resistant RJ11 handset cord designed to keep its shape, reduce desk clutter, and deliver clear, static-free sound for landline use. It is a practical pick for seniors or anyone who wants an easier-to-handle curly phone cord, with the main caveat that the “15 ft” figure depends on how the cord is stretched out.