Temdan Waterproof Case for Samsung Galaxy S23 (Built-in Screen & Lens Protector, IP68, Black/Clear)
Quick take
Temdan’s IP68 waterproof case for the Galaxy S23 is designed to combine full-body drop protection with built-in screen and camera protectors. It is a practical option for swimmers and outdoor users who want a sealed case for water activities, but fingerprint performance may depend on proper installation and may not work for every fingerprint setup.
Pros and cons
Pros
- IP68 waterproof build for submersion up to 30 minutes at about 1.5 m, suited for swimming and snorkeling use cases.
- Built-in screen protector and camera lens protector for added protection without using separate accessories.
- Shock-focused design with sealed corners and a non-slip side bumper for everyday grip.
- Precise cutouts for ports and controls, with wireless charging compatibility.
Cons
- Fingerprint recognition can be less reliable once the front protector is installed (buyer reports are mixed).
- For waterproof performance, installation needs to be done carefully, and you should plan to remove other screen/camera protectors.
- The design is protective, so it may feel less slim than non-waterproof cases.
What buyers think
Buyer-review evidence is broadly supportive on the two main promises: protection and water use. Several buyers describe the case as durable over months (including continued functionality of the case after drop or everyday mishaps), and others specifically mention using it for underwater videos and photos. The most consistent limitation theme involves fingerprint unlocking through the built-in front protector, where some buyers report the fingerprint sensor does not read properly until reconfigured or that recognition is affected in the cased state.
Design and protection: what you are really getting
This is a Galaxy S23 case engineered around three layers of protection. The frame and bumpers are built for impact absorption and better grip, while the camera and screen areas are covered by built-in protectors. There are raised areas around key surfaces (including the camera and screen zone), which helps reduce direct contact when you set the phone down face-first or on hard surfaces.
For water users, the emphasis is on sealing. A waterproof case is only as good as its fit, so the case uses a two-cover snap-on approach and expects a proper seal to maintain the intended level of water protection.
Waterproof performance and practical use
The case is rated IP68 waterproof, with submersion guidance for up to 30 minutes at approximately 1.5 m. That makes it relevant for everyday water exposure and planned water activities like swimming and snorkeling. It is also positioned as being compatible with wireless charging, which helps reduce friction when you are away from cables.
Buying caveat: Waterproof cases can be sensitive to installation and fit. You should expect to install carefully, avoid mixing incompatible screen or camera protectors, and treat your first swim or water test as a setup-validation step.
Screen and camera built-in protectors
Instead of relying entirely on add-on accessories, this case includes a built-in screen protector (listed at about 0.33 mm) and a dedicated camera lens protector. This design choice is most appealing if you want a more “all-in-one” waterproof solution, especially if you do not want to manage separate protector alignment.
It is also designed to preserve display responsiveness and photo quality, with emphasis on clear viewing and protection against impact around the lens area. If you frequently use your camera in active environments, the raised camera protection is a big part of why a rugged waterproof case can be worth it.
Installation, fingerprints, and touchscreen behavior
Installation is a key part of the experience. The case uses a snap-on front and back cover and includes installation steps that matter for both the seal and the sensor performance. After installing, fingerprint re-registration is recommended.
Important tradeoff: Some buyers report fingerprint recognition issues after the case is on, while others do not. If fingerprint unlocking is mission-critical for you, consider this your main decision point. You may need to experiment with fingerprint re-registration for the best outcome with the built-in protector in place.
Compatibility and access
The case is built for the Samsung Galaxy S23 6.1-inch model, with precise cutouts for ports and responsive button coverage. It is also wireless charging compatible. That helps it work as a daily-driver rugged case, not just a “bring it for vacation” accessory.
Pros and cons (buying verdict)
- Buy it if: you want an IP68 waterproof Galaxy S23 case that includes built-in screen and camera protection, and you will actually use it for water activities or frequent outdoor exposure.
- Skip it if: you rely heavily on fingerprint unlocking and want maximum consistency with no installation-related tradeoffs, or you prefer ultra-slim cases.
- Best-fit priorities: waterproof sealing, rugged drop protection, camera lens protection, and “one less accessory to manage.”
Alternatives to consider (by your priorities)
If you are shopping for waterproof protection but want a different balance, look for cases in three common categories:
- Traditional rugged waterproof cases without built-in screen protectors: better if you already use a favorite tempered-glass or TPU screen protector and do not want the fingerprint sensor affected by an additional layer.
- Waterproof cases with very strong touchscreen sensitivity focus: a fit if responsiveness is your top priority and you want to minimize the number of protective layers over the display.
- Budget waterproof covers with basic sealing: consider only if you do not need camera-lens coverage integrated into the design (or if you are fine adding a camera protector separately).
Without specific named competitors here, the most useful comparison is to match your top use case (swimming depth and frequency, drop risk, and fingerprint importance) to the case’s protection approach (built-in protectors vs add-ons).
Price and availability
Pricing varies by retailer and can change over time. Check the current Amazon listing to confirm today’s price and to review the seller details and delivery options.
FAQs
Is this case actually waterproof for swimming?
It is rated IP68 waterproof, with submersion guidance for up to about 30 minutes at roughly 1.5 m. It is designed for water activities like swimming and snorkeling, but installation quality and sealing matter, so it is smart to test after setup.
Does the built-in screen protector affect fingerprint unlocking?
Fingerprint behavior can be affected after installation. Some buyers report fingerprint recognition problems with the case on, and re-registering fingerprints is recommended. If fingerprint unlock is critical, plan for possible trial-and-error during setup.
Will the case work with wireless charging?
Wireless charging compatibility is listed, so you should be able to charge without removing the case, as long as your charger works with the case thickness and alignment.
Do I need to remove my existing screen protectors before installing it?
Yes. The case installation guidance recommends removing other screen protectors and camera protectors before installing, because extra layers can interfere with the seal and fit.
Is it only for the Galaxy S23 6.1-inch model?
Yes, it is made specifically for the Samsung Galaxy S23 (6.1-inch). It is not intended for other Galaxy S models.
How rugged is the drop protection?
The case is designed for shock protection with a rugged build and impact-absorbing corners, intended to handle drops used in everyday life and active environments. For the exact drop test claim, review the listing details.
Specifications
| Product Title | for Samsung Galaxy S23 Case,Waterproof Built-in Lens & Screen Protector[Full Body Shockproof][12 FT Military Drop Proof][Dustproof][IP68 Underwater] Case for Galaxy S23 5G 6.1’’-Black/Clear |
|---|---|
| Category | Cell Phones & Accessories > Cases, Holsters & Sleeves > Waterproof Phone Cases |
| Brand | Temdan |
| Manufacturer | Temdan |
| Model Name | Temdan for Samsung Galaxy S23 Case |
| Model Number | 6.1 inch |
| Color | Black |
| Material | HD PET Logo Display, Thermoplastic Polyurethane, HD Built-in Screen Protector, Hard PC Frame, Soft TPE Volume Buttons,Soft PP Back,HD Built-in Camera Protector HD PET Logo Display, Thermoplastic Polyurethane, HD Built-in Screen Protector, Hard PC Frame, Soft TPE Volume Buttons,Soft PP Back,HD Built-in Camera Protector See more |
| Compatible Phone Models | Samsung Galaxy S23 |
| Compatible Devices | Samsung Galaxy S23 6.1 inch |
| Water Resistance Level | Waterproof |
| Additional Features | Built-in Screen Protector, Camera Protector, Fingerprint Reading Compatible, Wireless Charging Compatible |
| Screen Size | 6.1 Inches |
| Is Autographed | No |
| Compatible Cellular Phone Models | Samsung Galaxy S23 |
| Pattern | Solid |
| Theme | Sport |
| Form Factor | Basic Case |
| Enclosure Material | HD PET Logo Display, Thermoplastic Polyurethane, HD Built-in Screen Protector, Hard PC Frame, Soft TPE Volume Buttons,Soft PP Back,HD Built-in Camera Protector |
| Finish | Glossy |
| Customer Package Type | Standard |
| Number of Items | 1 |
| Mfr Part Number | FSS23 |
| Warranty Description | 1 year |
| Age Range Description | Adult |
| Built-In Media | Screen Protector |
| Unit Count | 1.0 Count |
Available variants
Size
- Samsung Galaxy S23
- 6.1 inch
- Samsung Galaxy S23 Ultra
- Samsung Galaxy S22 Ultra
Color
- Black
- Light Blue
- White
- Green
Recommended next
Red2Fire waterproof iPhone 15 Pro case (IP68, glass camera + screen protector)
The Red2Fire waterproof iPhone 15 Pro case is built for buyers who want sealed, daily-drop and splash protection plus included glass screen and camera lens protectors. The key tradeoff to consider is that while the case helps with water and everyday impacts, at least one review suggests it may not hold up against a serious drop on asphalt.
Mitywah Waterproof Case for iPhone 14 Pro Max, Heavy Duty review
The Mitywah heavy-duty waterproof case is built for tough outdoor use, with a fully sealed design, MIL-STD 810G-516 drop claim, and an integrated screen protector. It’s also secured with small screws, which many buyers like for staying put, but expect added bulk and a snug, rugged fit.
Mitywah Waterproof Case for iPhone 17 Pro Max, Rugged Metal Case with Built-in Screen Protector (Orange)
The Mitywah rugged metal waterproof case is built for people who need full-body protection for an iPhone 17 Pro Max, including a built-in screen protector and camera protection. It targets outdoor and work-style use with IP68 waterproofing and MIL-STD 810G drop testing, but the heavy, sealed design can make charging more fiddly and may affect how accessories or screen responsiveness behave for some users.
Lanhiem Magnetic for Samsung Galaxy S26 Ultra Case, IP68 Waterproof review
A rugged, magnetic MagSafe-friendly waterproof case built for the Galaxy S26 Ultra (6.9-inch, 2026). It emphasizes IP68 water and dust protection, full-body coverage (including camera area), and an included screen protector, but fit and accessory compatibility can be hit-or-miss for some buyers.