Suptig Helmet Chin Mount Helmet Mount for GoPro Max Hero 13 12 11 10 9 8 Insta360 X5 X4 DJI Osmo Nano Action 3 4 5 Pro 6 (2 Pack)
Quick take
This Suptig chin mount kit is made for hands-free helmet filming, using a flexible adhesive strip and a 1/4” mounting interface so it can pair with many popular action cameras. It is a strong choice for riders with a chin bar shape that matches the mount’s fixed curvature, but adhesive performance depends on installation prep and allowing enough cure time.
Pros and cons
Pros
- Designed for many cameras, including GoPro models (Hero series and Max), DJI Action lines, and compatible Insta360 options.
- Flexible 180 degree adjustment helps aim the camera for different riding postures.
- Includes a 2-pack kit with adhesive backing plus 1/4” adapter and thumb screw hardware.
- TPU and nylon plastic materials with a stated “no worry about scratching” intent for the helmet surface.
Cons
- Adhesive strip fit can be limited by helmet chin bar geometry, especially on more irregular or feature-heavy designs.
- For aggressive riding positions, footage may tilt toward the dash unless you use extra extension hardware.
What buyers think
Buyer-review evidence is limited but points to a few consistent themes. Multiple buyers report the mount holds well once installed, including use at higher speeds, and that it can be more secure than an older chin mount that detached. Fit can vary by helmet model, with some riders finding it matches their chin bar shape closely, while others say the mount does not suit certain helmet contours. There is also a practical “aiming” takeaway, where the camera angle may need help for tucked, aggressive riding posture setups.
What this mount is for
This is a helmet chin mount for action cameras, intended for biking and motorcycling setups where you want a stable point-of-view shot without needing a chest rig or handlebar mount. Because it positions the camera near the rider’s face, it can be ideal for capturing road and track context, hands-free narration angles, and forward-facing perspectives.
Compatibility and mounting interface
The kit is marketed for a wide range of action cameras. It lists support for popular GoPro models (including Hero series and GoPro Max), several DJI Action models, and certain Insta360 cameras. If your action camera uses the standard mounting hardware interface supported by the included adapters, you should be able to get it mounted securely.
Included in the box are the mounting components needed to attach the camera, including a 1/4” mount adapter and a thumb screw, plus multiple 3M adhesive pieces.
How the adjustment works (and why it matters)
A key feature is a flexible 180 degree adjustment. That can help you refine camera pointing after installation, which is important because helmet chin mounts can end up too low or too high depending on your posture and helmet fit.
Review evidence suggests that for more aggressive riding positions, simply using the mount as-is may leave the camera aimed too far downward. Riders who regularly tuck forward may want additional extension solutions to keep the view oriented where they want it.
Installation reality: adhesive fit and prep
This mount uses an adhesive-backed strip. The manufacturer guidance emphasizes pressing the adhesive firmly and letting it cure for at least 12 hours in an environment over 10°C (50°F) before using it. Removal guidance also includes softening the adhesive with a hairdryer or heat gun, then slowly peeling it back.
In practice, the adhesive approach has two implications for buyers. First, install time and temperature matter for retention. Second, because the strip’s curvature is fixed, it works best when your helmet chin bar is fairly regular and feature-light, rather than deeply contoured or vented.
Pros and cons for different riders
Best for
- GoPro and DJI Action owners looking for a chin-mount option with a wide compatibility list.
- Riders who want flexible aiming after installation and mostly upright or moderate-forward posture.
- People who prefer adhesive mounts they can install quickly (once the cure time is respected) and want a 2-pack backup.
Who should avoid it
- Buyers with helmet chin bars that are highly irregular, vented, or feature-rich, where the strip curvature may not conform well.
- Very tucked racers or riders who need a consistently elevated angle, since additional extension hardware may be required to avoid dash-aimed footage.
Price and value
At a budget-friendly price point compared with many mounting ecosystems, this kit’s value is strongest when you can use the chin bar geometry it’s designed to fit. The 2-pack format helps if you want a spare for the same camera setup or if you plan to mount on two helmets.
One limitation for value is that if your helmet chin bar shape is a poor match, you may spend time reinstalling or end up looking for a different mount style (for example, a bracket-based system that clamps rather than adheres).
Bottom line
The Suptig chin mount is a practical choice for action-camera riders who want a forward, hands-free filming perspective and can match the mount to a compatible helmet chin bar shape. If you install it carefully, allow it to cure, and you have posture requirements that do not tilt the view too far downward, it can be a solid mount option. If your helmet has a complex chin bar contour or you routinely ride in a very tucked position, consider whether you need a more adaptable mounting approach or extension accessories first.
FAQ
Is the Suptig helmet chin mount compatible with GoPro Max and Hero cameras?
It is marketed as compatible with multiple GoPro models including GoPro Max and several Hero generations. Check that your specific model aligns with the listed compatibility and uses the mounting interface your camera supports.
Will this mount work on any helmet?
It uses an adhesive strip with a set curvature, so helmet fit depends on your chin bar shape. Riders with fairly regular, feature-light chin bars tend to have an easier time, while some helmet designs may not match well.
How long should I let the adhesive cure before riding?
The instructions recommend pressing the adhesive firmly and leaving it for at least 12 hours in an environment over 10°C (50°F) before use.
Can you adjust the camera angle after mounting?
Yes. The mount is designed with flexible adjustment (up to 180 degrees) to help you aim the camera for your riding position.
What if my footage points too low when I tuck forward?
Review evidence suggests that for aggressive, tucked riding, you may need an extension solution to raise the camera angle and keep it pointed more toward the road instead of the dash.
What’s included in the 2-pack?
You get two helmet chin mounts, multiple 3M adhesive pieces, a 1/4” mount adapter set, and thumb screws.
Specifications
| Product Title | Suptig Helmet Chin Mount Helmet Mount for GoPro Max Hero 13 12 11 10 9 8 Insta360 X5 X4 DJI Osmo Nano Action 3 4 5 Pro 6, More Action Camera, Bike Holder Mount, Motorcycle Helmet Chin Mount(2 Pack) |
|---|---|
| Category | Electronics > Camera & Photo > Accessories > Action Camera Accessories |
| Brand | Suptig |
| Manufacturer | Suptig |
| Model Name | helmet chin mount |
| Model Number | RSX-484 |
| Color | black |
| Item Weight | 45 Grams |
| Compatible Devices | gopro hero 13/12/11/10/9/8/7/6/5/4/3/3+/2/1/gopro max/dji action 5pro/dji action 5/dji action 6/dji action 4/3/insta 360 most action camera |
| Compatible Phone Models | If there is a phone clip, it can be compatible with 99% of phones |
| Mounting Type | Helmet Mount |
| Additional Features | Hand Free |
| Water Resistance Level | Waterproof |
| Compatible with Vehicle Type | Bicycle, Motorcycle |
| Item Dimensions | 5.67 x 1.06 x 1.14 inches |
| Unit Count | 2.0 Count |
| Shape | Rectangular |
| UPC | 744591594721 |
| Warranty Description | 1 years warranty |
| Manufacturer Contact Information | 3rd Floor, Building C, Fenda Technology Innovation Park, Sanwei, Hangcheng Street, Bao'an District, Shenzhen, Guangdong Province, China |
| Built-In Media | 2 x flexible adhesive sticky mount; 2 x thumb screw; 4 x 3M tape; 2x 1/4" Screw |
| Enclosure Material | Made of 3M original VHB adhesive and high-quality TPU, nylon plastic raw material, stainless steel material |
Recommended next
Luxebell Accessories Kit for AKASO EK5000 EK7000 4K WiFi Action Camera (14-in-1)
The Luxebell 14-in-1 action camera accessories kit is a bundle-style solution for AKASO EK5000/EK7000 owners who want more ways to shoot, from a chest harness and head strap to a floating grip and vehicle suction mount. Buyers generally like the variety and value, with a common tradeoff being that setup can feel a bit unintuitive until you learn the parts.
Replacement Side Door for GoPro Hero 8 Black, USB Pass Through Charging Battery Cover
The ParaPace replacement side door for the GoPro Hero 8 Black lets you access a USB-C charging port without leaving the camera’s battery compartment open. It’s a practical upgrade for long shoots, timelapses, and setups that benefit from continuous power, with a key tradeoff being that it is not water resistant.
Osmo Action Dual-Direction Mini Extension Rod, Compatibility: Osmo Action 6, Osmo Nano
The Osmo Action Dual-Direction Mini Extension Rod is a compact extension handle for Osmo Action 6 and Osmo Nano that adds reach and quick, dual-direction angle adjustments. Buyers like its small footprint, comfortable grip for longer sessions, and the built-in bottom tripod for steadier shots, with one key caveat: it must fit your existing setup, especially if you use a cage.
Insta360 2-in-1 Invisible Selfie Stick + Tripod, Aluminum Alloy Invisible
The Insta360 2-in-1 Invisible Selfie Stick + Tripod combines an extended selfie pole with a built-in tripod for hands-free framing. It is designed to disappear in 360 footage for “invisible” third-person shots, and its standard 1/4" mount makes it a practical accessory for compatible Insta360 action cameras.