SUPERONE Magnetic Ring Holder for MagSafe Dual-Side Magnetics, Removable Gym Phone Grip with Kickstand

What buyers think

Buyer-review evidence points to a consistent theme: the magnetic attachment is strong, and many people like how securely the holder stays in place while using it as a grip or stand. Multiple reviews mention easy rotation for positioning, and that it can also act as a practical stand for watching or using your phone comfortably while lying down or in front of you. There is also a recurring use case around mounting on metal surfaces (like refrigerators or gym equipment) and making the phone less intrusive during workouts.

Overall, the most reliable takeaway from reviews is that it is appreciated for grip strength, angle adjustability, and magnetic mounting flexibility.

How the dual-magnet ring holder fits into daily life

This is not just a basic ring grip. The design goal is to give you a stable hold, then convert quickly into a kickstand, and lastly provide a mounting option via magnets. If you regularly use your phone one-handed, switch between portrait and landscape viewing, or want a mount-free “stand on any surface” approach, these features can matter more than aesthetics.

Grip plus kickstand, with 360-degree angle control

The ring grip gives you an easier, more secure way to hold your phone, especially when you are laying down, walking, or multitasking. For hands-free moments, the kickstand mode is meant for positioning your screen at the angle you want, including portrait and landscape. Rotation is described as 360 degrees, so you can fine-tune where the hinge lands.

Dual-sided magnetics for mounting flexibility

Instead of relying on a single magnet face, the holder is designed with magnets on both sides so it can attach to certain magnetic car mounts directly. It is also described as usable on metal and with added metal stickers/plates for non-metal surfaces. This broad approach can be convenient if you want one accessory to handle multiple “where can I place my phone?” scenarios, like a fridge or gym equipment.

Compatibility and setup: what to check before buying

Most compatibility questions come down to whether your phone and case can use MagSafe-style attachment or whether you need the included metal ring and plates.

MagSafe and ring placement timing

If your iPhone model uses MagSafe cases or you already have a MagSafe-compatible setup, attachment is straightforward. If you are adding the metal ring to a non-MagSafe case or back, the product guidance includes a curing time before you start regular use. That matters because a weak early bond can lead to a frustrating experience the first day you install it.

Non-metal surfaces require the included plates

The holder can be used on non-metal surfaces when you apply the provided metal sticker/plate(s) where the phone grip should sit. For best results, placement and alignment are important. If you put the plate slightly off, you may notice difficulty getting the phone positioned the way you want.

Magnetic car mount notes

It is designed to work with magnetic car mounts using the magnets on both sides. However, there is a warning that it may not be compatible with every MagSafe car mount type, and you may need to remove the ring holder before attaching it in certain setups.

Pros and cons, based on review patterns

What seems to work well

• Strong holding power: Buyers commonly describe the magnet as impressive and secure.
• Usable positioning: Rotation and hinge tightness are described positively, with many users liking that it stays where they set it.
• Mounting versatility: Reviews support use on metal surfaces and pairing with magnetic mount setups.
• Hands-free viewing: The kickstand mode is frequently framed as helpful for video watching and comfortable screen placement.

Where buyers may run into friction

• Setup effort: Non-MagSafe cases may require adding the included metal ring, plus allowing time for proper adherence.
• Surface accuracy matters: Non-metal mounting relies on correctly placed plates.

Who should buy it

• You want a MagSafe-style ring holder that also functions as a kickstand.
• You use metal surfaces or gym equipment and want an easy way to keep your phone visible without holding it.
• You already have, or plan to use, a magnetic car mount and prefer not to remove your grip for every ride (subject to your mount type).
• You need 360-degree positioning for watching or video calls where angle matters.

Who should skip it

• You want a plug-and-play stand for any case and do not want to apply rings or plates.
• You rely on a very specific MagSafe car mount design and cannot verify it works with a dual-sided magnetic accessory.
• You are extremely sensitive to cosmetic scuffs and want a display-grade finish after regular pocket and surface contact.

Verdict

The SUPERONE magnetic ring holder is a practical upgrade if you want one accessory that covers three jobs: a secure ring grip, a kickstand for better screen positioning, and magnetic mounting on compatible setups and metal surfaces. It is especially attractive for people who work out with their phone nearby or who frequently use magnets to stage their device. Just be sure to plan for the setup steps on non-MagSafe cases (ring/plate placement and timing), and double-check your car mount type if you are buying specifically for in-car use.

Buy on Amazon

FAQ

Will this work with a non-MagSafe phone case?

It can work with non-magnetic setups if your case/back can accept the included metal ring. The guidance also notes letting the ring set for a short period before regular use.

Does it mount on non-metal surfaces?

Yes, it is intended to stick to non-metal surfaces when you apply the included metal stickers/plates to the surface in the spot you want the holder to attach.

Can it stay on while using wireless charging?

The design is removable, so you can detach it from your phone when you need wireless charging and then reattach it afterward.

Does it work with all MagSafe magnetic car mounts?

It is designed for use with magnetic car mounts, but it may not be compatible with every MagSafe car mount type. The safer approach is to confirm your mount configuration and be prepared to remove the holder for certain setups.

How adjustable is the stand?

The stand is rotatable and intended to support a range of viewing angles, including portrait and landscape positioning.

Recommended next

Grips $5.97

★★★★★ 4.1/5 4,269 ratings

Klearlook Silicone Double-Sided Suction Cup Phone Case Detachable Mount, Sticky Phone Grip with Higher Suction Power (Light Pink)

The Klearlook silicone double-sided suction cup phone case mount is a hands-free grip for clean, smooth surfaces like mirrors, windows, and glass. It’s designed to be detachable (no permanent adhesive), reusable and washable, and it fits many phones in the 6.1 to 7.2 inch range, but suction performance depends heavily on surface smoothness and prep.

Grips $8.99

★★★★★ 4.3/5 67,167 ratings

Syncwire Cell Phone Ring Holder Stand, 360 ° Rotation Finger Ring Kickstand Polished Metal Phone Grip Compatible with iPhone, Samsung, LG, Sony

The Syncwire metal finger ring holder is a slim, 360-degree rotatable grip that can also function as a kickstand. Reviewers tend to like the stability and long-term stickiness on non-silicone cases, but adhesion and hinge tightness can be hit-or-miss depending on your case material and how often you remove or reposition the grip.

Grips $25.99

★★★★★ 4.5/5 1,908 ratings

PopSockets Phone Grip for MagSafe, Magnetic Holder, Phone Stand, Green - Nightshade

PopSockets MagSafe Phone Grip (Nightshade) combines a one-handed grip, a hands-free stand, and a magnetic snap-on setup for compatible iPhones and MagSafe cases. It’s designed to collapse flat for pocket carry, and the MagSafe attachment can make case swaps easier than adhesive grips, with the main catch being compatibility limits for certain case types.

Grips $16.99

★★★★★ 4.4/5 11,487 ratings

SYNCWIRE Magnetic Phone Ring Holder for MagSafe, 360° Rotation Cell Phone Grip Stand Finger Ring Kickstand Two-Sided Magnet

The SYNCWIRE MagSafe-compatible phone ring holder is built around a strong N55 magnetic connection and a two-sided magnet design, so you can keep the ring on while using compatible MagSafe car mounts. It adds a comfortable 360° rotating grip plus a 90° flip for different viewing angles, with a flat-base design intended to reduce wobble. The main tradeoff is that wireless charging requires removing the metal ring, and grip strength can vary on non-ideal surfaces or cases.