Suoman 3+2 Pack for Garmin Forerunner 165 Screen Protector, Charger Port Tempered Glass Film
Quick take
This Suoman kit is a model-specific tempered glass screen protector set for the Garmin Forerunner 165, including multiple screen pieces and added protection for the charger port. It’s built for full-screen coverage, touchscreen responsiveness, and an anti-smudge coating for sweat, dust, and fingerprints. The main thing to get right is installation and surface cleanliness, because a small number of buyers report the protector can lift after getting water underneath.
Pros and cons
Pros
- Tailored fit for the Garmin Forerunner 165 screen, with access to buttons.
- 9H hardness tempered glass, designed to be scratch-resistant and shatter-resistant.
- Hydrophobic and oleophobic coating helps reduce sweat and oil/fingerprint smudges.
- Extra pieces included (3 screen protectors plus 2 charger port protectors) for easier replacement.
- Buyers commonly report bubble-free, easy installation and no noticeable touch impact.
Cons
- Limited but notable reports of adhesion problems after water gets under the edges, leading to lifting.
- Installation quality matters, so rushed prep can reduce staying power.
- Buyers looking for a “one-and-done” installation with guaranteed longevity may want to consider alternative approaches (for example, cases with screen coverage) depending on how often their watch gets wet.
What buyers think
Buyer-review evidence points to solid day-to-day protection and usability for many Garmin Forerunner 165 owners. Multiple reviewers mention the protector staying on through workouts and active wear (including swimming in at least one account) and not dulling touch responsiveness. They also describe the film as staying clear and not introducing bubbles or haze when installed with the provided guide.
At the same time, buyer-review evidence is mixed on adhesion in wet conditions. Some feedback indicates that if water gets trapped at the interface, the protector may pop off or lose grip after showering or exposure to water. Overall, buyer-review evidence suggests the kit performs best when the screen is cleaned thoroughly before installation and the edges are well seated.
What you get in the box
This kit is designed around the Garmin Forerunner 165. It includes:
- Screen protectors: 3 tempered glass films for the watch display.
- Charger port protectors: 2 pieces for the charger port area.
- Installation help: an install kit with guidance to help with alignment and placement.
Design and protection: what matters for real use
Tempered glass strength
The screen protector uses 9H hardness tempered glass, intended to resist scratches and reduce the chance of shattering if the watch takes a hit. For buyers who wear their watch during sports, outdoor activities, or rougher workouts, this is the core reason to choose a glass film over a softer plastic protector.
Full-screen coverage and touch sensitivity
The film is cut to match the Forerunner 165 display area, covering the screen and allowing access to controls. Multiple reviews mention that touch responsiveness remains normal after installation, which is critical for Garmin’s workout and navigation gestures.
Anti-smudge coating
To help with everyday wear, the coating is described as hydrophobic and oleophobic, aiming to reduce sweat, dirt, and oil residue from fingerprints. If you frequently use your watch while training, this can make the screen easier to read and less annoying to wipe down.
Installation and staying power (where buyers get mixed)
Many buyers report easy installation with no bubbles when the screen is cleaned and the protector is aligned carefully. The included install guide and cut design appear to help with placement.
However, some buyers report adhesion issues after water gets between the screen protector and watch face, which then allows the protector to lift later. To reduce the odds of that happening, focus on:
- Thoroughly cleaning the watch screen before applying the film.
- Applying slowly so the edges seat evenly from one side to the other.
- Avoiding early exposure to water right after installation until the film is fully settled (especially around the edges).
Pros and cons of the Suoman kit
Best for
- Garmin Forerunner 165 owners who want tempered glass protection rather than a basic plastic film.
- People who care about touch responsiveness and a clean, clear look.
- Active buyers who want extra protection for the display and charger port area.
- Shoppers who like having spare protectors in case of a replacement later.
Who should skip it
- If you’re consistently getting your watch wet immediately after applying accessories, you may prefer an approach that emphasizes full device protection rather than a screen-only interface.
- If you tend to install quickly without careful cleaning and edge seating, adhesion may be less reliable for your use pattern.
Is it worth it?
For most Garmin Forerunner 165 owners looking for a tempered glass screen shield plus extra charger port coverage, this kit aligns well with the typical priorities: tailored fit, strong material, and touch-friendly performance. The main decision factor is your installation and your wet-use habits. If you’re careful with prep and alignment, the balance of protection and usability is a strong match for training and everyday wear.
FAQs
Does this fit the Garmin Forerunner 165 exactly?
It’s designed specifically for the Garmin Forerunner 165 screen, with a cutout and button-access layout intended for that model.
Will the screen protector affect touch sensitivity?
Multiple reviews describe no meaningful change in touch responsiveness after installation, and the protector is intended to maintain sensitive performance.
Is the coating good for sweat and fingerprints?
Yes, the film is described as hydrophobic and oleophobic, which is meant to reduce sweat and oil/fingerprint residue.
How does it handle water exposure?
Buyer reports are mixed. Some reviewers describe good staying power even with swimming or bouldering, while others report that if water gets between the protector and the watch face, the protector can lift later. Careful installation and letting the film settle helps reduce the risk.
What’s included in the kit?
It includes 3 screen protectors, 2 charger port protectors, and an installation kit with guidance stickers.
Is it easy to remove if you want to replace it?
The film is described as easy to remove without residue. As with any screen accessory, removal success will still depend on how well it adhered in your installation and environment.
Specifications
| Product Title | Suoman 3+2 Pack for Garmin Forerunner 165 Screen Protector, Charger Port +[Anti-Scratch] 9H Hardness Tempered Glass Screen Protective Film |
|---|---|
| Category | Electronics > GPS, Finders & Accessories > GPS System Accessories > Screen Protector Foils |
| Brand | Suoman |
| Manufacturer | Suoman |
| Model Name | Garmin Forerunner 165 Music, Garmin Forerunner 165 |
| Model Number | L1467 |
| Color | Clear |
| Material | Tempered Glass |
| Compatible Devices | Smartwatch |
| Item Hardness | 9H |
| Compatible Phone Models | For Garmin Forerunner 165 |
| Special Features | Touch Sensitive |
| Screen Surface Description | Glossy |
| Clarity | 99 |
| Unit Count | 3.0 Count |
| Number of Items | 5 |
| Brand Name | Suoman |
| Part Number | L1467 |
| Special Feature | Touch Sensitive |
Available variants
Color
- Privacy
- Clear
Recommended next
![Spigen AluminaCore Tempered Glass Screen Protector [GlasTR EZ FIT] designed for Tesla Model Y Premium (2026), Model Y Performance (2025/2026) - Matte/Anti Glare/Anti Finger Print](/product-images/019ed147-4770-7a50-8ed0-10fb311e4ea2-0-626b036edfce.webp)
Spigen AluminaCore Tempered Glass Screen Protector [GlasTR EZ FIT] designed for Tesla Model Y Premium (2026), Model Y Performance (2025/2026) - Matte/Anti Glare/Anti Finger Print
Spigen’s AluminaCore tempered glass screen protector with EZ Fit aims to protect the 16-inch Tesla Model Y touchscreen while keeping the display’s look more glare-friendly and the touch response natural. It’s built for Model Y Premium (2026) and Model Y Performance (2025/2026) and uses an installation kit to help align the glass, with buyer feedback strongly focused on fit, clarity of installation, and not feeling “slick” like many matte films.
Canvcle 2PCS Screen Protector for 2019-2025 2026 Audi Q7 Q8 10.1 Inch Upper and 8.6 Inch Lower Touch Screen
A 2-pack tempered-glass infotainment screen protector set designed specifically for the 2019-2025 (and 2026) Audi Q7 and Q8, covering both the upper 10.1-inch and lower 8.6-inch touch displays. Buyers like the fit, clarity, and mostly bubble-free installation, with the main caveat being adhesive strength concerns on some installations and an important compatibility exclusion (not for the 2024 Q8 e-tron).
16" Screen Protector for 2026 Tesla Model Y Juniper (Premium & Performance)
A tailored front and rear matte tempered-glass screen protector set for the 2026 Tesla Model Y Juniper. It’s designed to cut glare, resist fingerprints, and protect against everyday scratches, with a custom alignment frame intended to make installation straightforward (though the front can take patience).
CDEFG 2022-2025 2026 Silverado Sierra Screen Protector for 2024 2025 2026 Silverado
A custom-fit tempered glass screen protector made for certain 2022 to 2026 Silverado and Sierra truck infotainment screens (13.4-inch). It aims to resist scratches, reduce fingerprints, and preserve touch responsiveness, with installation guided by included instructions and an anti-bubble/self-adhesive approach.