Solar Outdoor Motion Sensor Alarm, Dog Barking&Gunshot Sound,130db Loud Noise Maker,Support Recording,13 Kinds of Sound and Strobe Light to Deter Raccoons, Deer, Skunks, Bears, and Coyotes
Quick take
This solar outdoor motion sensor alarm combines a loud 130dB sound, a strobe light, and motion-triggered alerts to help deter animals around yards, gardens, and livestock enclosures. It offers 24-hour, night, and timer modes, plus solar with USB backup, which helps with day-to-day uptime. The biggest practical caveat is that sensitivity can mean false alarms in windy conditions or when nearby branches move.
Pros and cons
Pros
- Strong deterrent style, built around 130dB loud noise and a strobe light.
- Flexible alert setup with 13 preset sounds and the option to record your own audio.
- Multiple operating modes (24-hour, night, and timer every 5 minutes) for different schedules.
- Power flexibility with solar plus USB charging.
Cons
- Motion sensitivity can lead to activations on windy days or with moving trees.
- Remote control requires close, direct linear alignment and no obstructions, which can be inconvenient once mounted.
- Review evidence shows a small but notable chance of unit failure over time (limited to what’s reflected in a few reports).
What buyers think
Buyer-review evidence is generally positive on deterrence impact. Several shoppers describe using the alarm around farms or animal enclosures (such as chicken pastures and goat areas) and report fewer wildlife visits after installation. Common themes also include that the device is very loud, which is part of why it can startle animals. Setup is described as straightforward, with included mounting hardware helping reduce friction.
The main negative theme relates to sensitivity. A few buyers note that movement from wind or nearby vegetation can trigger the alarm. There is also limited evidence that some units may stop working after time, suggesting quality consistency may vary.
What this outdoor motion alarm is for
This type of device is meant for people who want an on-site deterrent that activates when something moves in range. It’s designed for outdoor wildlife problems where visual and audio cues can reduce repeat visits. Typical use cases include animal shelter areas (coops, pens, and yards), driveways, and garden perimeters where raccoons, deer, skunks, bears, coyotes, or similar animals may be wandering through.
Key features that affect day-to-day use
Loud alarm and strobe light for deterrence
The alarm uses a loud 130dB sound and a strobe light to increase visibility and attention-grabbing behavior when motion is detected. This combination is the core reason shoppers consider it for wildlife deterrence, since it does not rely on a human watching for immediate threats.
13 sounds plus recording, to match your situation
You can choose from 13 preloaded sounds or record your own. That flexibility can be helpful if you want to avoid training animals to one predictable sound, or if you prefer a specific audio profile for your area.
Three motion-activation modes
- 24-hour mode for constant protection.
- Night mode for dark hours.
- Timer mode, which triggers alerts periodically every 5 minutes.
These modes matter if you want to reduce daytime noise, limit how often alerts fire, or focus the deterrent effect when animals are more active.
Solar with USB charging, plus remote control limits
The unit supports solar powering with USB charging backup, which can help if your location has inconsistent sunlight. One practical reminder is that the remote uses infrared technology and only supports control when the remote is in direct linear alignment with the device, with no obstructions, and within about 3 feet. If you mount the unit higher or behind décor, you may need to plan how you will access the remote during setup and daily adjustments.
Coverage and mounting
Specifications list a maximum detection range of up to 500 feet and ceiling-style mounting. If your goal is to protect corners or multiple entry points, it can help to think of placement as part of your effectiveness, since coverage depends on where motion moves through the sensor’s line of sight.
Pros and cons recap
- Best fit: outdoor owners dealing with repeat wildlife visits who want a loud, light-based, motion-triggered deterrent with configurable audio and multiple operating schedules.
- Consider first if: you can mount the device so it faces the kinds of movement you want to respond to (paths, approaches, or entry areas).
- Not ideal if: you are sensitive to false alarms, since windy conditions and moving branches can trigger activations.
- Watch-outs: remote control alignment requirements and possible variability in long-term reliability based on limited review reports.
Price and availability
Pricing can vary over time on major retailers. If you want the most accurate current cost and ordering details, check the listing directly. It is currently positioned as a budget-friendly option compared with more complex motion-alert systems, but you should still consider how many units you may need for full perimeter coverage.
Who should buy (and who should avoid)
Buy it if you want a simple wildlife deterrent
You’re likely a good fit if you want an outdoor motion alarm that triggers on movement with sound and strobe light, and you value configurable audio (preset sounds plus recording). It’s also a solid match if you prefer solar power with USB backup for extra resilience.
Avoid it if false alarms would be a dealbreaker
If your area has lots of wind, dense shrubs, or frequent movement from nearby trees, you may end up adjusting placement more often or tolerating nuisance alerts. Also consider whether you can reliably reach the sensor for remote setup, since infrared control depends on direct alignment and a short distance.
Alternatives to consider
If you’re comparing options rather than choosing immediately, think about these decision points:
- Noise and light deterrents vs. notifications: this focuses on deterrence, not phone alerts. If you want remote monitoring and alerts, you may prefer a camera or smart security setup instead.
- Budget deterrents vs. sensor tuning: if false alarms worry you, look for systems that emphasize adjustable sensitivity, better environmental filtering, or that allow more targeted placement.
- Power strategy: if your location is often shaded or has low sun exposure, the USB backup becomes more important. You may also consider devices designed primarily for constant power.
FAQ
Does it support recording your own sound?
Yes. It supports 13 preloaded sounds and you can record your own audio for motion-triggered alerts.
What are the alarm activation modes?
It offers three modes: 24-hour mode, night mode, and timer mode, which triggers alerts every 5 minutes.
How is it powered?
It supports solar power with USB charging backup for added flexibility.
Is it controlled by a remote?
Yes, it uses infrared remote control. Control works when the remote is in direct linear alignment with the unit, without obstructions, and within about 3 feet.
Will it trigger due to wind or moving trees?
Motion sensitivity can cause activations when nearby branches or vegetation move in windy conditions, so placement matters.
Where is it best to mount it?
The unit is listed for ceiling mounting, and effective coverage depends on placing it so movement in the areas you care about enters the sensor’s detection path.
Bottom line
If you need a loud, strobe-based outdoor motion deterrent with selectable audio and flexible operating modes, this solar alarm is built for that job. It appears to perform best when you can mount it for the right movement paths and minimize exposure to wind-driven motion. If you are dealing with a wildlife pattern that keeps returning, this kind of device can be a practical first-line deterrent, as long as you’re prepared to tune placement and accept that sensitivity may cause nuisance triggers.
Specifications
| Product Title | Solar Outdoor Motion Sensor Alarm, Dog Barking&Gunshot Sound,130db Loud Noise Maker,Support Recording,13 Kinds of Sound and Strobe Light to Deter Raccoons, Deer, Skunks, Bears, and Coyotes |
|---|---|
| Category | Electronics > Security & Surveillance > Motion Detectors |
| Brand | COTINSE |
| Manufacturer | COTINSE |
| Model Number | N911N |
| Color | Red + Brown |
| Power Source | Solar Powered with USB Backup |
| Maximum Range | 500 Feet |
| Mounting Type | Ceiling Mount |
| Battery Description | battery not included |
| Antenna Location | Garden |
| Item Dimensions D x W x H | 3"D x 3"W x 3"H |
| Mfr Part Number | N911N |
| Built-In Media | 1 |
| Unit Count | 1.0 Count |
Available variants
Style
- 1 Remote+1 Sensor
Recommended next
SimpliSafe Motion Sensor - Compatible with Gen 3 Home Security System
A battery-powered indoor motion sensor for SimpliSafe Gen 3 setups, designed to help reduce false alarms with pet-detection behavior. It’s built for room coverage from a corner (90-degree field of view, up to 35 ft range) and is easy to mount with peel-and-stick or hardware, paired through the SimpliSafe app. The main caveat is compatibility, since some buyers report pairing issues if their system generation is not a match.
eMACROS Non-APP Wireless Driveway Alarm — 1/2 Mile Solar Motion Sensor with Plug-in Receiver
The eMACROS Non-APP Wireless Driveway Alarm is a solar-powered, wireless motion sensor and plug-in receiver setup designed to alert you from far down a driveway (up to about 1/2 mile, 2640 ft). It’s a strong fit for rural or large properties where you want early warning, but you should expect motion-based alerts to pick up animals and other movement, which can mean occasional false alarms unless you tune placement and sensitivity.
1byone Driveway Alarm, Home Security Alert System with 36 Melodies
The 1byone driveway alarm is a simple, DIY motion alert system designed for driveways, porches, gates, and other outdoor entry points. It pairs a plug-in receiver with two weatherproof PIR sensors, offering long-range wireless alerts, multiple chime options, and several ways to be notified (sound and LED flash). The main tradeoff is that it is best for straightforward alerts, not advanced security features or fine-tuned detection control.
Wuloo Wireless Driveway Alarm 1800 Feet Long Range Motion Sensor Alert System (1&2-Brown)
The Wuloo Wireless Driveway Alarm is a battery-powered motion sensor system designed to alert you inside with a receiver console when someone (or a vehicle) moves near your driveway or yard. Buyers like the long sensor battery life, outdoor weather resistance, and the ability to tune sensitivity to reduce false alerts, but setup and sensor aiming matter to avoid triggers from trees or passing cars.