SmallRig Black Mamba Camera Cage Kit for Canon EOS R5 Mark II (4976)
Quick take
This streamlined cage kit is built for the Canon EOS R5 Mark II to add protection, more stable handheld handling, and a rig-friendly mounting setup. It’s a strong fit for hybrid shooters who want quick transitions between handheld, tripod, and gimbal-style rigs. The main caveat is that port and cable access can feel a bit tighter once the cage is installed.
Pros and cons
Pros
- Form-fitting streamlined one-piece design with anti-twisting locking to keep the camera stable.
- Built-in Arca-Swiss style quick release plate for direct tripod or plate-free swapping.
- Ergonomic “Black Mamba” top handle for steadier handheld control.
- Includes a HDMI & USB-C cable clamp and 9H tempered glass screen protector.
Cons
- Certain wired connections and port access can require extra finger space.
- Not a water-resistant cage, so you will still need your own weather protection plan.
What buyers think
Buyer-review evidence points to a consistent theme: the cage fits the Canon EOS R5 Mark II well, stays compact enough for handheld shooting, and provides confidence when the camera needs extra protection. Many buyers also highlight the practical value of the integrated Arca-style mounting plate, noting it reduces the hassle of swapping plates. There are also reports that the cage design can slightly make access to specific ports (like wired trigger or other connections) less convenient, though basic button and dial access remains available. Overall, review evidence is most supportive of a “permanent tripod-ready” style setup rather than a cage you frequently remove and reinstall.
Who this cage kit is best for
- Hybrid shooters who want to protect the R5 Mark II while still shooting handheld through the EVF.
- Tripod or gimbal users who value quick mounting, including Arca-style compatibility on the included bottom plate and support for DJI RS/RSC/RS 2 through RS 4 Pro stabilizers.
- Accessory builders who need multiple mounting points, including 1/4"-20 and 3/8"-16 threaded holes, cold shoe options, and QD/strap interfaces.
- Creators who manage cables and appreciate an integrated HDMI and USB-C cable clamp for cleaner routing.
Design and build: streamlined protection without major bulk
This kit uses a streamlined, form-fitting approach intended to wrap the R5 Mark II without turning the setup into a blocky rig. It locks in place with a 1/4”-20 screw at the bottom and positioning blocks on both sides, designed to prevent twisting for steadier shooting. Multiple built-in silicone pads are included to help protect the camera body from scratches.
For mounting, the cage includes both 1/4"-20 and 3/8"-16 threaded holes, plus additional interfaces such as an ARRI-compatible locating hole, a strap slot, and QD socket support. If you like to expand later, these points matter because they let you distribute accessories where you want them.
Top handle and mounting workflow
The ergonomic “Black Mamba” top handle is designed to improve stability during handheld shooting and reduce the feel of grabbing the camera body directly. If your workflow alternates between handheld, tripod, and stabilizer setups, the cage is built to support that transition.
A standout workflow feature is the built-in Arca-Swiss style quick release plate on the bottom. Reviews frequently call out that it works well with existing tripod plate setups, reducing the need to continually swap plates between configurations.
Cable management and screen protection
For video and data-heavy days, the cage includes a dedicated HDMI & USB-C cable clamp using hand-tightened screws for quick release. This is most useful when you want to prevent cable strain or keep connections from shifting while you reposition the camera.
It also includes a scratch-resistant 9H tempered glass screen protector with an IK03 impact resistance rating. One design note: the tempered glass protector is intentionally made slightly smaller than the screen edges to avoid dust getting trapped in larger gaps. That can be a normal expectation with this style of protector.
Compatibility and practical limitations to consider
- Designed for Canon EOS R5 Mark II mounting, with a fit that reviewers describe as precise for the body and controls.
- Port access can be less convenient once the cage is installed. The cage still enables access to controls, but wired connections (for example, a wired trigger port) may require more effort.
- Weather resistance is not stated, so plan on using your own rain cover or protection for wet conditions.
Pros and cons summary
If you want a dedicated, compact cage kit that improves handling, adds real protection, and keeps your rigging setup organized (especially with the built-in Arca-style plate and cable clamp), the SmallRig Black Mamba kit is easy to justify. If you frequently connect and disconnect wired accessories in tight spaces, be prepared for slightly more “finger gymnastics” around certain ports.
Price and availability
Pricing and stock can change. If you want to check the latest cost from your preferred retailer, use the button below.
FAQs
Does the SmallRig Black Mamba cage kit include a screen protector?
Yes. The kit includes a scratch-resistant 9H tempered glass screen protector with an IK03 impact resistance rating.
Is there an Arca-Swiss style plate built into this cage?
Yes. It has a built-in bottom plate designed for Arca-Swiss style mounting, allowing direct tripod mounting without needing a separate plate swap.
Will I be able to access all buttons and controls after installing the cage?
Reviewers report good access to buttons and dials for handheld use. However, wired port access may be slightly tighter and can take more effort depending on your cables and attachments.
Does this cage kit include a cable clamp?
Yes. It includes a dedicated HDMI and USB-C cable clamp designed to help secure connections during movement.
Is this cage waterproof?
The product is not described as water resistant, so it is not intended to replace weather protection for wet conditions.
Specifications
| Product Title | SmallRig Black Mamba Camera Cage Kit for Canon EOS R5 Mark II with Top Handle and Dedicated Cable Clamp, Aluminum Alloy Camera Rig with HawkLock Cold Shoe, 1/4''-20 & 3/8''-16 Threaded Holes - 4976 |
|---|---|
| Category | Electronics > Camera & Photo > Accessories > Accessory Bundles |
| Brand | SMALLRIG |
| Manufacturer | SmallRig |
| Model Number | 4976 |
| Video Capture Resolution | 3840 x 2160 (4K UHD) |
| Color | Black |
| Item Weight | 324.8 Grams |
| Product Dimensions | 5.09"D x 5.09"W x 7.22"H |
| Manufacturer Part Number | 4976 |
| Maximum Weight Recommendation | 2 Kilograms |
| Item Dimensions D x W x H | 5.09"D x 5.09"W x 7.22"H |
| Folded Size | 173.6 x 129.2 x 183.5 mm |
| Compatible Devices | Monitor |
| Iso Range | 100-51200 (expandable to 102400) |
| Video Capture Format | MP4 |
| Audio Recording | No |
| Light Sensitivity | 100-51200 (expandable to 102400) |
| Shooting Modes | Portrait, Landscape, Sports, Night mode, etc. |
| Exposure Control Type | Automatic |
| Water Resistance Level | Not Water Resistant |
| File Format | MP4 |
| Media Type | ProductImage |
| Viewfinder Type | LCD screen |
Available variants
Size
- R5 Mark II Cage
- R5 Mark II Cage Kit
Recommended next
NEEWER 50 in 1 Action Camera Accessory Kit Compatible with GoPro Hero 12 11 10 9 DJI Osmo Insta360 and More
The NEEWER 50 in 1 Action Camera Accessory Kit is a large, budget-friendly bundle built to cover the most common action-camera mounting needs, from head and chest straps to bike, car, and floating-wrist grips. It is a strong fit if you want more shooting angles without buying single mounts one by one, with the main caveat being that compatibility depends on your exact camera and mount interfaces.
Rieibi Accessories for Fujifilm Mini Evo Instant Camera (Clear Case & Screen Protector Bundle)
The Rieibi Mini Evo accessory bundle pairs a clear case with a multi-pack screen protector set designed to fit the Fujifilm Mini Evo hybrid instant camera/printer. It’s built for everyday protection while keeping camera controls accessible, and reviewers highlight how easy the case is to put on and how well it fits.
60 in 1 Camera Accessories Kit Compatible with GoPro Hero
A 60-piece action camera accessory bundle designed to expand your setup with GoPro-style mounts for chest, head, wrist, bike handlebars, and more. It is best for beginners and creators who want lots of shooting angles without building a system piece by piece, with the main caveat that some parts may feel basic and compatibility details can require adapters.
NEEWER Camera Video Cage Film Movie Making Kit, Aluminum Alloy with Top Handle, Dual Hand Grip, Two 15mm Rods (Black + Blue)
The NEEWER aluminum camera video cage is a lightweight, aluminum rig that adds dual hand grips, a top handle, and a 15mm rod base for accessory mounting. It’s a good fit for DSLR and camcorder shooters who want a more stable handheld shooting setup and a modular base for follow-focus, lens support, and other 15mm-rod accessories.