Silicone Skin + Holders for The New Rectangular EZ Pass with Interlocking Strips (NJ, PA...)
Quick take
This kit combines a flexible black silicone wrap with suction-cup mounting hardware, built to fit the new rectangular EZ Pass style that uses interlocking strips (flat on the back). It is a good match if you want an all-black, adhesive-free windshield setup, but you must confirm your transponder shape first, since it does not fit other EZ Pass models.
Pros and cons
Pros
- Flexible silicone full wrap helps protect the transponder and keeps a neutral black look.
- Includes black suction cups plus plastic adapter pieces for mounting without windshield adhesive.
- Designed specifically for rectangular EZ Pass units with interlocking strips that are flat on the back side.
- Includes components intended to reconfigure back to a no-skin setup if you change your setup later.
Cons
- Compatibility is strict, it does not fit other EZ Pass shapes or models.
- Setup can be difficult, especially installing the suction cups, which may require considerable force.
- Some buyers note the side-cover design can leave portions of the center exposed.
What buyers think
Buyer feedback for this kit is mostly straightforward: it generally does the job when it matches the correct EZ Pass model. Several reviews describe the product as working as expected and fitting the newer rectangular NJ EZ Pass setup. Where buyers diverge is mainly around installation effort. At least some purchasers report that attaching the suction cups can be challenging and may take significant pressure, and a few mention that the cover design leaves parts of the transponder area uncovered.
Who this is for
- You have the newer rectangular EZ Pass with interlocking strips and a flat back, like the EZ Pass used in NJ and similar variants referenced by buyers.
- You want an all-black look and prefer avoiding windshield adhesive.
- You want a kit with mounting hardware included, not just a cover.
Who should skip it
- Your transponder is a different shape (not the rectangular model with interlocking strips that are flat on the back).
- You need an extremely easy, quick setup. If you are sensitive to DIY installs, the suction-cup attachment may feel more difficult than expected.
- You want full coverage with zero exposed center area, since some users have pointed out partial exposure based on the cover’s side sections.
Design and compatibility overview
This product focuses on two things: protecting and visually integrating your transponder, and mounting it to the windshield without adhesive. The silicone skin is meant to wrap the transponder in an all-black finish. For attachment, the kit includes a pair of black suction cups and plastic adapter parts designed to connect securely to the transponder’s interlocking-strip system.
Compatibility matters here. It is intended for the newer rectangular EZ Pass with interlocking strips (flat on the back). It is not designed for other EZ Pass models or for transponders that already come with their own suction-cup system.
Setup experience (what to expect)
Expect installation to take a bit of muscle, especially when applying the suction cups. Review evidence indicates that the suction-cup installation may require exceptional force for some buyers. If you choose this kit, plan to follow the instructions carefully, and take your time aligning everything before fully seating the cups.
Pros and cons, compared to your alternatives
If you are choosing between adhesive vs. suction
- Choose suction like this if you want removability and an adhesive-free windshield approach.
- Consider adhesive-style options if your priority is the simplest installation, but only if you are comfortable with adhesive mounting on glass.
If you are choosing between “cover-only” vs. “cover + mount”
- Choose this kit if you want one package that includes both the silicone wrap and the suction-cup holders.
- Choose a cover-only option if you already have a compatible mounting method and you mainly want the look and protection benefits.
Verdict
The Silicone Skin + Holders kit is a solid pick for drivers with the newer rectangular EZ Pass that uses interlocking strips, especially if you want a black, stealthy look without adhesive. The main tradeoffs are strict compatibility and a potentially challenging suction-cup setup. If your transponder shape matches and you are willing to take time on installation, this is the kind of targeted accessory that can make your EZ Pass setup feel more intentional.
Need to confirm fit and see the current listing? Buy on Amazon
FAQs
Does this fit all EZ Pass transponders?
No. It is intended for the newer rectangular EZ Pass style with interlocking strips that are flat on the back side. Other EZ Pass shapes and models are not supported.
Is it mounted with adhesive?
No. The kit includes black suction cups and adapter pieces designed for a no-adhesive windshield attachment method.
Is setup easy?
Setup can be difficult for some buyers, particularly installing the suction cups, which may require significant force. Careful alignment and following the instructions helps.
Is it fully black all around?
The transponder cover is designed for a neutral black look, but some buyers have mentioned that portions of the center can be left exposed due to the cover’s side sections.
What’s included in the box?
The kit includes a flexible silicone skin, a pair of black suction cups, and plastic adapter pieces used to connect the transponder to the suction cups.
Specifications
| Product Title | Silicone Skin + Holders for The New Rectangular EZ Pass with Interlocking Strips (NJ, PA...) - Includes Strong Suction Cups for an All-Black Look Without Adhesive on Your Windshield |
|---|---|
| Category | Automotive > Interior Accessories > Anti-Theft > Accessories |
| Item Weight | 1.13 ounces |
| Package Dimensions | 6.89 x 3.46 x 0.98 inches |
| Brand | IoT Slash |
| Price | USD 12.99 |
| Rating | 4.1/5 from 46 Amazon ratings |
| Best Sellers Rank | #43,202 in Automotive ( See Top 100 in Automotive ) #57 in Antitheft Accessories |
Recommended next
OMKHE Faraday Bags 5 Pack, Anti-Tracking Faraday Bag for Phones & Car Keys & Tablets & Laptops
OMKHE’s 5-pack Faraday bags are designed to block a range of wireless signals, with multiple pouch sizes for phones, tablets, a laptop, and key fobs. The set is a strong pick for travelers and anyone who wants a simple “seal-and-store” method for privacy protection, with the main tradeoff that using a pouch means your device cannot receive calls or data while sealed.
Mission Darkness Faraday Bag for Keyfobs (2-Pack) // RF Shielding Protective Case
The Mission Darkness Faraday Bag (2-pack) is designed to block wireless signals so your key fob, transmitter, or other small devices are harder to relay or tamper with. It uses multi-layer Faraday fabric, durable water-resistant nylon, and includes two universal-sized bags, with the main tradeoff being fit (measure your keyset first) and a slightly fiddly closure for some key fobs.
TICONN 2PK Faraday Bags for Car Keys Fob, 3.5''X5.0'' Faraday review
TICONN’s 2-pack Faraday bags are designed to block key fob related RFID, NFC, and other wireless signals using dual-layer shielding, with a carbon-fiber-textured pouch and a two-compartment layout. Reviews are generally positive for short-term peace of mind, but some buyers report signal blocking can weaken over time and recommend periodically testing.
Samfolk Faraday Box with Faraday Bags for Car Keys, Car review
The Samfolk Faraday Box with Faraday Bags is a compact, wood-and-PU-leather styled signal-blocking case for keyless car fobs and other small valuables. Shoppers report it prevents cars from sensing fobs when stored inside, and it can also work with a matching Faraday pouch for on-the-go protection, with the main tradeoff being interior surface sensitivity and a tight, “stubborn” opening feel.