Scosche Rhythm+ Replacement Charger Dock, KELIFANG Replacement USB Charging Cradle Cable 1M Compatible with Scosche Rhythm Plus Heart Rate Monitor Armband Accessories, Black
Quick take
This is a replacement charging dock and USB-A charging cradle for the Scosche Rhythm+ heart rate monitor armband. It delivers a 5V, 1A (about 5W) output and is meant for simple at-home or travel charging. The main buying caveat is compatibility, since similar Rhythm models may use a different charging fit.
Pros and cons
Pros
- Designed specifically for the Scosche Rhythm+ heart rate monitor armband (charger dock only).
- USB-A input charging setup with a stated 5V output and 1A current (about 5W).
- Portable, lightweight design with a 1M cable length for flexible placement while charging.
- Includes protective charging design intended to help guard against over voltage and over current.
Cons
- Not guaranteed to fit other Rhythm variants, so double-check your exact model before ordering.
- Uses a wired setup (no wall plug included), so you will need a USB power source or compatible charger.
What buyers think
Buyer-review evidence points to the charger being a reliable replacement for people who needed an Orangetheory-compatible replacement charger and simply wanted it to work again. Multiple snippets mention that it charges properly when the fit matches the Rhythm+ device. There is also limited but important evidence of a compatibility mismatch with a different Rhythm model variant, where the charging end would not seat correctly.
What this charger is, and who it’s for
The KELIFANG Rhythm+ replacement charger is meant to restore charging capability for a Scosche Rhythm+ heart rate monitor armband. It includes the charging dock and a USB cable, but not the heart rate monitor itself, so it’s best for owners replacing a lost charger or dealing with a damaged cable or dock.
Key specs that matter for everyday charging
- Connection type: USB charging connector with USB Type-A connection to your power source.
- Power output: 5V output at 1A (about 5W), designed to charge the Rhythm+.
- Cable length: about 1M, which helps if your USB power source is across a room or on a desk.
- Power source: corded charging from a compatible USB power source (power plug not included).
- Protection: charging design intended to protect against over voltage and over current during charging.
- Materials: listed as ABS+PVC with copper wire for stable current transmission.
Compatibility tip: check your exact Rhythm model
Because the dock must physically seat correctly in the charger contacts, compatibility comes down to the exact armband model. This accessory is described as a replacement for Scosche Rhythm+. If you own a different Rhythm variant (even close-looking models), fit can differ, and there is at least limited review evidence of a “does not fit” issue on another model line.
Setup experience (what “plug and play” usually means here)
In practical terms, you connect the USB-A end to a USB power source such as a PC/laptop USB port or a compatible USB power bank. Then you dock the armband onto the charging cradle. The main workflow is simple, since the product is intended to be a direct replacement rather than a complicated charging accessory.
Pros and cons, in plain terms
When it’s a good fit
- You have a Scosche Rhythm+ armband and need a replacement charger dock.
- You want a portable, desk-friendly charging cable with a moderate length (1M).
- You prefer charging from a variety of USB power sources (USB port, laptop, power bank).
When you should pause before buying
- You are unsure whether your armband is the exact Rhythm+ model, since physical fit may not match other variants.
- You do not already have a USB power source, because the accessory does not include a plug.
Is it worth it?
If you specifically need a Scosche Rhythm+ replacement charger dock and you can confirm your model matches, this is a straightforward, low-fuss solution built around a stable 5V, 1A charging output. The value mostly comes from restoring charging functionality without requiring a full device replacement. If your armband is a different Rhythm variant, take extra care with compatibility, since the dock fit is the part most likely to cause issues.
View latest price and choose your setup
If you’re ready to replace your charger, check the latest price and confirm the model fit, then pair it with a USB power source you already have or plan to use.
FAQ
Does this charger work with the Scosche Rhythm+ heart rate monitor armband?
It’s intended as a replacement charger dock for the Scosche Rhythm+ heart rate monitor armband. The armband itself is not included.
What power does it use?
The charger is designed for a 5V output at 1A (about 5W). The connector uses USB Type-A, so you need a compatible USB power source.
Is a wall plug included?
No. The accessory is meant to be connected to a USB power source (for example, a laptop or power bank) since a plug is not included.
How long is the cable?
The cable length is listed as about 1 meter.
Will it fit other Scosche Rhythm models?
Compatibility is built around the Rhythm+ charger fit. Fit can vary between Rhythm model variants, so it’s important to verify you have the correct Rhythm+ armband before ordering.
Specifications
| Product Title | Scosche Rhythm+ Replacement Charger Dock, KELIFANG Replacement USB Charging Cradle Cable 1M Compatible with Scosche Rhythm Plus Heart Rate Monitor Armband Accessories, Black |
|---|---|
| Category | Electronics > Wearable Technology > Smart Clip Accessories |
| Brand | KELIFANG |
| Manufacturer | KELIFANG |
| Model Number | Scosche Rhythm+ ( Scosche Rhythm Plus) |
| Color | black |
| Connector Type | USB |
| Compatible Devices | Monitors |
| Compatible Phone Models | Scosche Rhythm+ Plus |
| Additional Features | Lightweight Design |
| Input Voltage | 5 Volts |
| Amperage | 1 Amps |
| Total Usb Ports | 1 |
| Wattage | 5 watts |
| Output Current | 1 Amps |
| Output Voltage | 5 Volts |
| Power Source | Corded Electric |
| Current Rating | 1000 Milliamps |
| Main Power Connector Type | 2 Pin |
| Portable | Yes |
| Total USB 2.0 Ports | 1 |
| Power Plug | No Plug |
| Current | DC |
| Wired Charging Connector Type | USB Type A |
| Mounting Type | Tabletop Mount |
| Connectivity Technology | USB |
| Built-In Media | Replacement Charger Dock |
Recommended next
Clip for Fitbit Luxe, Clip Holder Compatible with Fitbit Luxe, Soft Pink
A low-profile silicone clip designed for Fitbit Luxe, giving you a belt, pocket, or bra-worn option instead of using the wrist band all the time. Reviews highlight that it can be comfortable and convenient for everyday step tracking, with one main caveat around fit tension and the possibility of the tracker loosening for some users.
VSuRing Ear Hooks 360° Rotatable Multi-Dimensional Adjustable Soft Silicone Bluetooth Headset Clips (5 Pack, Transparent)
VS uRing’s transparent soft-silicone ear hooks are designed to clamp onto compatible earbuds to help prevent drops during sports. They offer 360° rotation plus small extension and retraction for angle tuning, but the fit depends heavily on the earbud’s speaker base size, and some users feel the clamp can be a bit light.
Bitbelt 12 pack (one of every color, 3 that glow in the dark!)
A color-matched 12-pack of silicone safety clips designed to help keep compatible wearable trackers and bands from unfastening during everyday movement. Best for travelers and anyone who wants a simple, low-cost “belt and suspenders” approach, with the main tradeoff being fit and compatibility must match your band type.
MoKo 2-Pack Clip Holder Compatible With Fitbit Inspire/Inspire HR
The MoKo 2-Pack Clip Holder is a soft silicone, stainless-clip case made for Fitbit Inspire and Inspire HR. It’s designed for wearing your tracker on clothing or a waistband instead of on your wrist, with an easy snap-in setup and protection against everyday scuffs. The main tradeoff is that clip cases may have durability issues over time, and you must switch to “On Clip” mode for best fit.