Sametop Floating Handle Grip Floaty Stick Waterproof Handler Accessory Compatible with GoPro Hero 13–1, Osmo Action Cameras (Yellow)
Quick take
This floating hand grip is built for action-cam shooters who want more control while filming in and around water. The bright yellow floaty body, textured wet grip, and adjustable wrist strap aim to make it easier to hold steady and easier to retrieve if dropped. The biggest buying caveat is buoyancy is meant to help in typical water situations, not replace careful handling for deep or high-impact use.
Pros and cons
Pros
- Float-first design with a bright yellow cap for visibility in the water.
- Textured non-slip grip intended for secure handling in wet conditions.
- Adjustable wrist strap for extra retention when you are shooting one-handed.
- Compatible with many GoPro models (including Hero 13–1 families) and other action cameras that use a similar mount.
- Watertight hollow compartment can store small items for waterproof carrying.
Cons
- Compatibility depends on your camera’s mount and accessories, so fit is not guaranteed for every rig.
- As a “handler” grip, it is not a full replacement for a purpose-built underwater housing or larger mounts.
- Buoyancy can help retrieval, but it is still not a substitute for careful use in rough conditions.
What buyers think
Buyer-review evidence points to a clear pattern: people mainly buy this grip for water-friendly handling. Reviews commonly mention that it is comfortable to hold, stays grippy even when hands are wet or slick (including during snorkeling use), and makes footage steadier than bare handheld handling. Multiple buyers also highlight the practical value of the bright color for spotting/retrieving the grip and note that the locking/water-sealing cap approach held up during repeated install and removal. Some feedback also emphasizes the mounting fastener feel, describing it as easier to tighten with wet or cold hands, which can matter during outdoor sessions.
Note on evidence: Overall review detail is supportive of performance and handling, but buyer-review evidence is limited in areas like long-term durability after extended deep-water use and how it behaves with every third-party action camera model.
What this floating handle grip is for
This is a compact action-cam handler that combines a hand grip with flotation. It is designed for outings where you would normally worry about dropping your camera into water, like snorkeling, swimming, kayaking, surfing, fishing, and similar water sports. Instead of relying only on your grip, the floaty body is intended to help the camera stay on the surface so you can keep shooting and retrieve the setup if it slips.
Key features that affect everyday use
Floating body and visibility
The core idea is the floaty construction plus a bright yellow bottom cap meant to improve spot-ability if you drop the grip-camera combo. This can reduce downtime when you are filming around water and improves the odds of quick retrieval.
Wet-ready grip and strap retention
The grip uses a textured, non-slip feel intended for secure handling in wet conditions. A lock adjustable wrist strap adds a secondary safety layer, especially when you are adjusting your angle or switching between handheld and “let it hang” moments.
Built-in mount and quick camera attachment
It uses a built-in two-prong adapter to mount an action camera quickly. In practical terms, that can mean fewer separate parts to manage during a session, as long as your camera’s mount and included accessories are compatible.
Small waterproof compartment (and neutral buoyancy)
The handle includes a watertight hollow compartment. Beyond storage for small valuables like keys or coins, it is also positioned as a way to help achieve more neutral buoyancy for steadier handling in the water.
Compatibility: will it fit your camera?
The grip is marketed as compatible with many action camera lines, including numerous GoPro models (such as Hero 13 Black, Hero 12 Black, Hero 11 Black, Hero 10 Black, Hero 9 Black, Hero 8 Black, Hero 7 Black, and older Hero generations, plus Session and Max). It also targets DJI Osmo Action and other action camera brands that use a similar mounting approach.
Buyer-fit caution: If you use uncommon mounts, adapters, or bulky third-party accessories, you should verify that your camera configuration matches the adapter/mount style supported by this grip.
Pros and cons for different buyers
Best for
- Action-cam users who frequently shoot near water and want better control than a bare hand hold.
- People who value quick retrieval, especially where the device is easy to misplace on the surface.
- Snorkel, swim, and paddle sport shooters who want a lightweight, pocketable handler.
- Anyone who likes the idea of a small waterproof compartment for tiny essentials.
Who should consider other options
- Buyers who need a dedicated underwater camera housing or system for deep, high-pressure, or extreme conditions.
- Those whose camera build uses mounts or accessories that may not match the adapter.
- Anyone expecting a long-term “tripod replacement,” since this is primarily a hand grip/handler form factor.
Verdict: is this floating grip worth it?
If your biggest pain point is camera slips into the water, this floating handle grip is a practical way to improve both control and retrieve-ability. The combination of bright visibility, wet-grip texture, wrist strap retention, and a watertight cap compartment fits well with casual-to-serious water sports filming. It is worth it when you want a simple, lightweight handler rather than a more complex underwater setup. Just make sure your camera mount and accessories match the supported mounting approach so you avoid compatibility surprises.
FAQ
Is this grip actually waterproof?
The handle is designed as a waterproof grip/float accessory, and it includes a watertight hollow compartment with a sealed cap concept for keeping small items dry. For best results, ensure the cap is properly closed before use.
Will it keep my camera from sinking completely?
The floating body is intended to help keep the camera on or near the water surface for easier retrieval. Buoyancy can vary with your camera model and any attached accessories, so treat it as helpful float support, not a guarantee for every scenario.
What cameras is it compatible with?
It is marketed for many GoPro Hero models (including Hero 13 Black down through earlier generations), GoPro Session and Max, DJI Osmo Action cameras, and several other action camera brands that use a compatible mount approach. If your setup includes unusual adapters, double-check fit.
Can it be used as a normal selfie stick or monopod?
Yes, it is positioned as usable as a standard hand grip/handler when you are not shooting underwater, since it functions like a monopod/selfie-style grip for angles on land or above the surface.
Does it include a strap?
Yes, it includes an adjustable wrist strap lanyard intended to add extra security while you shoot.
What is the waterproof compartment for?
The watertight hollow compartment can store small valuables like keys or coins for keeping them dry, and it can also be used as part of the buoyancy approach for steadier handling.
Specifications
| Product Title | Floating Handle Grip Floaty Stick Waterproof Handler Accessory Compatible with GoPro Hero 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, Session, 3+, 3, Hero(2018), Max, DJI Osmo Action Cameras (Yellow) |
|---|---|
| Category | Electronics > Camera & Photo > Tripods & Monopods > Monopods |
| Brand | Sametop |
| Manufacturer | Sametop |
| Model Number | GP-41-New |
| Color | Yellow |
| UPC | 708022640418 |
| Unit Count | 1.0 Count |
| Manufacturer Part Number | GP-41-New |
| Warranty Description | One year warranty for every purchase from Sametop, 30 days money back. |
| Folded Size | unfoldable |
| Compatible Devices | All GoPro and Most Action Cameras |
| Audio Recording | No |
| Water Resistance Level | Waterproof |
| Media Type | ProductImage |
| Compatible Camcorder Models | GoPro HD Hero1, GoPro HERO11 Black, GoPro HERO4 Black, GoPro HERO5 Black, GoPro HERO6 Black, GoPro HERO9 Black GoPro HD Hero1, GoPro HERO11 Black, GoPro HERO4 Black, GoPro HERO5 Black, GoPro HERO6 Black, GoPro HERO9 Black See more |
Available variants
Color
- Orange
- Green
- Yellow
- Blue
Recommended next
69" Monopod & Magnetic Phone Tripod for All Phones,Selfie Stick for Magsafe with Remote & Phone Mount Adapter
A 3-in-1 telescopic monopod that doubles as a phone tripod and selfie stick, with a MagSafe-style magnetic holder for iPhone 12–17 and a non-MagSafe phone clamp for other phones. At full extension it reaches 69 inches, includes a wireless remote, and offers 360° rotation, but the remote has limited reliability in one reported case, and the fully extended unit may feel heavy for some users.
Manfrotto 290 Carbon Fiber 4-Section Monopod (MM290C4US)
The Manfrotto 290 Carbon Fiber 4-Section Monopod (MM290C4US) is a compact, lightweight carbon fiber monopod built for quicker on-the-go shooting with a 4-section design and fast leg adjustments. It’s designed to pair with common camera heads and supports up to a 10 kg payload, making it a strong option for travel, sports, and long-lens work.
UBeesize 70" Auto-Open Magnetic Tripod for iPhone, MagSafe Selfie Stick
The UBeesize 70" Auto-Open Magnetic Tripod blends a compact travel build with an auto-open tripod and a MagSafe-compatible magnetic phone mount for faster setup. It also includes a detachable remote (up to 10 m range) and a 360° rotating holder with adjustable tilt, making it a practical choice for vlogging, video calls, and hands-free recording.
Sametop Floating Handle Grip Floaty Stick Waterproof Handler Accessory Compatible with GoPro
The Sametop floating handle grip is a compact, waterproof action-cam monopod style grip designed to keep compatible cameras afloat, improve stability while filming, and make it easier to retrieve your gear in the water thanks to a bright bottom cap and adjustable wrist strap. It also includes a watertight hollow compartment for small items, which can help balance buoyancy for steadier shots.