RNVEASS dash cam mount rearview mirror bracket installation kit (16 connectors)
Quick take
This rearview mirror dash cam bracket replaces suction-cup style mounting with a screw-based mirror mount, aiming to stay put in heat and reduce windshield clutter. It includes 16 connectors to help you match different dash cams, GPS units, and sports cameras, plus a 360-degree rotating head to dial in the viewing angle. The main caveat is fit, you need a rearview mirror rod diameter greater than 0.4 inches for proper installation.
Pros and cons
Pros
- 16 different connectors designed to adapt to many popular dash cams and action camera-style devices
- 360° rotating ball head for flexible positioning and angle adjustment
- Screw-based, tool-free installation intended to avoid suction cups and tape
- Designed to not block the line of sight when mounted correctly
Cons
- Mirror fit depends on your rearview mirror rod being greater than 0.4 inches
- Some vehicles may require careful screw orientation during installation to avoid interference
- Quality is described as good for the purpose, but not always comparable to premium brand accessories
- If your rearview mirror is deep or moves through a tight clearance, bracket movement could be affected
What buyers think
Buyer-review evidence is limited, but the recurring themes are practical installation experience and stability versus suction mounts. Multiple shoppers reported that the kit helped their camera stay in place better than suction cups, especially in conditions where suction tends to fail or get bumped. Several reviews highlighted that the included connectors provide enough options for different camera bases, and that angle positioning is straightforward thanks to the rotating head. On the tradeoff side, a few buyers noted installation can be fiddly if the mirror is in a tight location or if screw placement creates clearance issues with a deeper mirror, sometimes requiring extra care to keep the mirror movement usable. Overall, the feedback points to solid “gets the job done” performance, with a fit-and-clearance sensitivity depending on your specific mirror design.
What this mount is, and why it exists
This kit is built for rearview mirror mounting, placing your dash cam or compatible device near the center of your vehicle’s rear view. Instead of relying on suction cups or adhesive tape, it uses a bracket that attaches to the mirror hardware with screws. The goal is a cleaner setup that can help reduce the common frustrations of suction mounts, such as loosening over time or leaving residue.
Key features that matter for daily use
16 connectors for device compatibility
The mount comes with 16 different connectors intended to cover a wide range of dash cams and related devices (including brands commonly used in front and rear dash setups). In practice, the biggest question is whether your camera’s base or mounting interface matches one of the included options, so checking that your device uses a compatible screw or adapter style is important.
360-degree rotating ball head
The rotating head supports flexible adjustment, which can make it easier to fine-tune the recording angle. This is useful if you need to aim for license plates, reduce glare, or keep the camera positioned so it does not intrude into the driver’s view.
Mirror-rod fit requirement
The bracket is designed to install on most cars, trucks, and SUVs, but it specifies a compatibility requirement: your rearview mirror rod must be greater than 0.4 inches. If your mirror hardware is thinner than that, the kit may not seat correctly.
Tool-free installation, screw-based attachment
Installation is described as easy and tool-free, using two long screws (2.4 inches) and two short screws (1.4 inches). This screw-based approach is the core difference from suction or adhesive mounts, and it is what buyers appear to appreciate most when they are trying to solve stability issues.
Pros and cons breakdown by buyer priority
If you want a more stable alternative to suction
This mount’s mirror-based, screw-secured design is a strong fit for buyers who are tired of suction cups losing grip. The review themes center on improved stability and fewer “camera falls off” moments compared to suction setups.
If you need compatibility with multiple devices
The inclusion of 16 connectors makes this a better choice when you are using a dash cam (or another compatible device) with a specific mounting base and you want to avoid buying a separate adapter. That said, the quality is described as not necessarily matching official premium brand accessories, so think of this as a practical value kit rather than a luxury accessory.
If you are concerned about rearview visibility
The kit is positioned as not blocking the line of sight when installed correctly. Reviews also suggest some buyers can mount the camera below the mirror without interfering with their ability to see traffic behind. However, there are clear clearance concerns for certain mirror shapes, particularly deeper mirrors that may collide with the bracket hardware during movement.
Who should buy it
- Drivers who want to replace suction cup or adhesive mounts with a more secure mirror bracket
- Shoppers using a dash cam or related device that can work with one of the included connectors
- Anyone who values flexible angle setup and wants 360-degree adjustment
- Buyers with a rearview mirror rod thicker than 0.4 inches
Who should avoid it
- People with rearview mirror rods thinner than the 0.4-inch requirement (fit may be a problem)
- Drivers with deep rearview mirrors where the bracket or screws could interfere with mirror movement or safe viewing clearance
- Shoppers who need premium accessory build quality comparable to official high-end mounts
Price and availability
It is sold as an in-stock item in the United States. For the most accurate current price, use the live listing.
Bottom line verdict
The RNVEASS rearview mirror dash cam mount kit is a sensible value option if your current suction setup is unreliable, you want a cleaner mirror-based placement, and you have a mirror rod thick enough to meet the stated requirement. The 16 connectors and 360-degree adjustment are practical advantages, and buyer feedback supports that it can solve “camera keeps coming loose” issues. The main thing to get right is clearance, especially if you have a deep mirror or tight installation space, because screw placement and mirror movement can require extra care.
FAQ
Will this fit my rearview mirror?
It’s intended for most vehicles, but it requires that your rearview mirror rod is greater than 0.4 inches. If your mirror hardware is smaller than that, you should expect fit issues.
Does it use suction cups or tape?
No, it’s designed to be installed using screws on the rearview mirror mount area. This is meant to avoid the loosening or residue problems that can come with suction cup or double-sided tape setups.
How does the 360-degree rotating head help?
The rotating ball head lets you adjust the camera angle so you can aim the lens more precisely while driving, which can help reduce obstruction and improve recording framing.
Is it compatible with my dash cam?
The kit includes 16 different connectors intended to match many dash cams, GPS devices, and compatible action-camera-style mounts. Compatibility depends on your device’s mounting interface, so confirm it matches one of the included connector options.
Is installation difficult?
Installation is described as easy and tool-free, using both long and short screws to accommodate different circular pipe diameters. Some buyers note the mounting can be a bit tedious in tight spaces, particularly when positioning the screws in a way that works with their specific mirror layout.
Will it block my line of sight?
It is designed to avoid blocking the line of sight when mounted correctly. However, if your rearview mirror is deep or moves through a tight clearance, you may need to pay close attention to bracket placement so it does not interfere with safe rear visibility.
Specifications
| Product Title | Dash Cam Mount, Rearview Mirror Bracket Installation Kit, for Rove APEMAN CHORTAU VANTRUE Crosstour Old Shark GoPro Roav YI Z-Edge KDLINKS Falcon Zero Peztio and Most Dashcam DVR GPS,16 Connectors |
|---|---|
| Category | Electronics > GPS, Finders & Accessories > GPS System Accessories > Vehicle Mounts |
| Brand | RNVEASS |
| Manufacturer | xinhuaxianancuidianzikejiyouxiangongsi |
| Color | Black |
| Compatible with Vehicle Type | Car, Truck, Van |
| Other Special Features of the Product | Adjustable |
| Mounting Type | Rearview Mirror Mount |
| Field Of View | 360 Degrees |
| Auto Part Position | Rear |
| Are Batteries Included | No |
| Compatible Devices | Dash Cam, GPS Device |
| Real Angle of View | 360 Degrees |
| Auto Part Orientation | Front |
| Built-In Media | 16 different connectors |
| UPC | 797422831359 |
| Unit Count | 16.0 Count |
| Warranty Description | 2 Year |
| Vehicle Service Type | Car, Truck, Van |
| Special Feature | Adjustable |
| Included Components | 16 different connectors |
Recommended next
Garmin 010-10908-02 Portable Friction Mount
The Garmin 010-10908-02 is a portable dash friction mount designed to hold compatible Garmin nüvi and StreetPilot devices securely on stable surfaces. It focuses on quick in-and-out mounting, adjustable viewing angles, and a grip-on-dash approach that avoids common windshield suction issues.
RAM Mounts Double Socket Arm, Standard Length C Size 1.5" Ball Connector Arm (RAM-201U)
The RAM-201U is a medium-length double socket arm for C-size (1.5") RAM ball systems, built from powder-coated marine-grade aluminum. It’s designed for quick, tool-light adjustment and repeatable positioning, with a spring-assisted ball connection and published standard/heavy-duty weight limits for mounting accessories like electronics, camera gear, or transducer setups.
Miracase Phone Holders for Your Car with Metal Hook Clip, Air Vent Cell Phone Stand Car Mount, Dark Black
The Miracase air-vent phone mount uses a metal hook and clamp arms to hold phones securely while you drive. It’s designed for most phones from 4.0 to 7.2 inches (including thicker cases) and supports 360-degree rotation for portrait or landscape viewing. The main caveat is compatibility: it fits horizontal and vertical air vents (not round vents), and the vent blade width needs to be under about 1.4 inches.
RAM MOUNTS B Size 1" Double Socket Mount Arm – Medium Composite (RAP-B-201U)
The RAM-B-201U is a medium-length RAM double-socket arm for B size (1-inch) ball-and-socket systems. It gives you flexible positioning with “near-infinite” angle adjustment and quick pivot setup using a spring inside the arm. Best for riders and vehicle setups that need a compact arm length and strong, marine-grade composite construction, with the main caveat that you must build the rest of your mount with compatible B size components.