RJ11 6P4C Pass Through Connectors (25 Pieces Pack) Telephone Line Cable Wire Male Plug, AV00501
Quick take
This 25-pack of RJ11 6P4C pass-through connectors is meant for DIY telephone cabling, including repairs and custom-length cable builds. The pass-through design makes wire sequencing easier to verify before crimping, and gold-plated contacts are intended to support stable connections. The main thing to double-check is compatibility with your crimp tool and whether you actually need a 6P4C (4-pin) RJ11 connector.
Pros and cons
Pros
- Pass-through construction helps with wire order verification before crimping.
- RJ11 6P4C connector uses 4 pins, suitable for standard RJ11 telephone wiring.
- Gold-plated contacts are designed for better, stable connection performance.
- Pack of 25 is practical for multiple repairs or custom builds.
Cons
- You need a compatible pass-through crimping setup to use these properly.
- Not a universal RJ45 solution, they are for RJ11-style telephone connections only.
What buyers think
Buyer-review evidence is limited but points to a consistent theme: these connectors are straightforward to work with when paired with the right crimping tool. Multiple comments highlight that inserting wires through the pass-through path and crimping down is quick, and that the connectors fit their crimper and perform reliably for the intended telephone wiring tasks. Overall, the reviews tend to emphasize “works as expected” reliability and ease of getting a solid crimp, with reports of good condition on arrival.
What you’re getting
The RJ11 6P4C pass-through connectors come as a 25-piece pack (model AV00501). They are built for telephone cable work using an RJ11 connector type with 4 pins (6P4C). The connectors are white and intended for indoor or outdoor use.
Why pass-through connectors can make wiring easier
With pass-through connectors, the wires are routed through the connector body and extend out the other side during the process. That design can help reduce guesswork when arranging the wire sequence. Practically, that matters when you are replacing a damaged connector or building a custom cable and want to confirm each conductor is in the correct position before crimping.
Compatibility and device fit
These connectors are intended for standard RJ11 telephone connections. That typically covers common use cases like telephones, fax machines, modems, and VoIP or PBX-style equipment that accepts RJ11 cabling. They are also a good match when you need RJ11 connectors as part of a conversion workflow between different network or phone-side interfaces, as long as the final device expects RJ11.
Pros and cons for different buyers
Best for
- DIYers repairing broken RJ11 telephone cable ends.
- Anyone building custom-length RJ11 telephone cables for a home office or small PBX/VoIP setup.
- Shoppers who prefer pass-through connectors for easier wire sequence verification.
Maybe not the right choice if
- You need an RJ45 (Ethernet) connector or a different pin configuration, because these are specifically RJ11 6P4C (4-pin).
- You do not already have a compatible crimping tool and workflow for RJ11 pass-through connectors.
Installation basics (so you buy with confidence)
To use these, you will generally strip the cable jacket, arrange the conductors to the correct sequence, trim the wire tips neatly, insert the wires into the connector through the pass-through path, and then crimp with a pass-through-compatible crimp tool. If you already have the workflow down, these connectors can fit neatly into your routine for quick cable repair jobs.
Price and availability
Pricing varies by retailer and can change over time. This is a low-cost 25-pack format, which is usually best when you expect to do more than a single repair or want spares on hand for future cable fixes.
Verdict
If you’re working with RJ11 6P4C telephone cabling and want a pass-through connector style that helps you verify wire order before crimping, this 25-pack is a solid, practical option. It is not for RJ45/Ethernet needs, and the value depends on having (or planning to get) a compatible crimp setup, but for the right RJ11 repair or custom cable project, it checks the key boxes: correct connector type, pass-through design, and gold-plated contacts.
FAQs
Are these RJ11 connectors compatible with 4-wire (4-pin) telephone cables?
They are RJ11 6P4C connectors, which is a 4-pin configuration designed for standard RJ11 telephone wiring, not RJ45 Ethernet.
What does “pass-through” mean for RJ11 connectors?
Pass-through connectors route the wires through the connector body so they can extend out the other side during the wiring process. That can make it easier to confirm conductor order before crimping.
Do I need a special crimping tool to use pass-through RJ11 connectors?
Yes, you will typically need a crimp tool and workflow compatible with pass-through RJ11 connectors to achieve a proper crimp and connection.
What devices are these connectors intended for?
They are intended for telephone cabling use cases such as telephones, fax machines, modems, and VoIP or PBX-style equipment that uses RJ11 connections.
Are these connectors good for custom-length telephone cables?
Yes. A 25-pack format is commonly used for building custom RJ11 cables or making repairs, especially when you want to reuse connectors as part of a DIY cable build.
Specifications
| Product Title | RJ11 6P4C Pass Through Connectors(25 Pieces Pack) Telephone Line Cable Wire Male Plug, AV00501 |
|---|---|
| Category | Electronics > Accessories & Supplies > Telephone Accessories > Telephone Cords |
| Brand | XANHAM |
| Manufacturer | Aomaga(Zhong Shan) Electronic And Plastic Co., Ltd. |
| Model Name | AV00501 |
| Color | White |
| Item Weight | 0.02 Kilograms |
| Connector Type | RJ11 |
| Cable Type | RJ11 |
| Compatible Devices | Telephone |
| Other Special Features of the Product | Pass Through |
| Compatible Phone Models | Standard Telephone, Rotary Phone, Cordless Phone, VoIP Phone, PBX Phone |
| Connector Gender | Female |
| Number of Pins | 4 |
| Recommended Uses For Product | repairing broken connectors, creating custom-length cables, using with telephones, fax machines, and modems |
| Specification Met | RoHS |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Item Shape | Round |
| Brand Name | XANHAM |
| Customer Package Type | sealed anti-static bag |
| Model | AV00501 |
| Part Number | AV00501 |
| Unit Count | 25.0 Count |
| Number of Items | 25 |
| Special Feature | Pass Through |
Available variants
Size
- 25 Pack
- 50 Pack
- 100 Pack
Style
- Pass-Through 6P4C
- Regular 6P4C
Recommended next
Uvital Telephone Cord Detangler, Wireless Anti-Tangle Telephone Handset Cable 360 review
The Uvital wireless telephone cord detangler is designed for RJ9 landline handset cords, helping prevent receiver cords from twisting and tangling. It uses a 360-degree rotating swivel and gold-plated metal contacts, but it is not a fit for VoIP or RJ45 modular connections, and the added piece can be bulky depending on your handset.
The VoIP Lounge Replacement 25 Foot Long White Handset Curly Cord for AT&T Phone
A simple, long white curly handset cord designed for AT&T landline phones, offering 25 feet of fully extended reach. It is a basic replacement that fits buyers who need more distance between the handset and base, with the main caveat being that real-world usable length is typically less than the advertised maximum.
Phone Cable 300ft Rounded Black Roll (100m Long) 4x1/0.4 26 review
A 300 ft (100 m) bulk roll of 4-wire, 26 AWG solid copper telephone cord designed for DIY runs in walls or between devices. It’s compatible with RJ11/4P4C and other common modular plug formats, but you will need to terminate it yourself (modular plugs are not included).
Phone Cord 15FT, Landline Telephone Cable with RJ11 Plug, Includes Telephone Inline Coupler RJ11 Splitter and 10pcs Cable Clips(White)
A 15-foot RJ11 landline phone cord kit that includes a 2-way RJ11 splitter and an inline coupler, plus 10 cable clips for easier routing. Best for straightforward home office or utility setups where you need more reach or to share one wall jack across two devices, with the main caveat that cord length may be tight for your specific layout.