Replacement Ear Pads for Sony MDR 7506 - GVOEARS Earpad Mesh Fabric Cushions for MDR V6 V7 MDR-CD900ST Headphones with Memory Foam (Black)
Quick take
These replacement ear pads are built to fit Sony MDR-V6, MDR-V7, and MDR-CD900ST models, using breathable sports mesh over high-density memory foam. Buyers report an easier, snug install and a more comfortable, less sticky feel than older flaking pad materials, with improved comfort and outside-sound reduction.
Pros and cons
Pros
- Breathable mesh fabric designed for long listening sessions.
- High-density memory foam for a slower-recovery, cushioned fit.
- Stitching on the inside seam is intended to hold up and resist cracking.
- Snug fit with a lip that seats into the headphone’s earpiece groove.
Cons
- Replacement pads will only help if your headphones are the compatible MDR-V6/V7/CD900ST-style fit.
- Noise isolation and “sound” changes depend on your seal, and results may vary if the pads do not sit fully all the way around.
What buyers think
Buyer-review evidence clusters around comfort, fit, and how the pads compare to older, worn materials. Multiple reviewers describe the install as straightforward and the pad fit as secure once the lip is seated into the groove. Comfort is a consistent theme, especially for people who found older coverings flaking, feeling sticky with sweat, or wearing out quickly. Several buyers also mention reduced outside noise (like desk sounds) and that the cushioning thickness does not appear to create obvious frequency-response issues for their setup. Overall, buyer evidence points to a practical, everyday upgrade for worn Sony MDR-style pads, with performance largely tied to getting a proper seal during installation.
What these ear pads are for
These are replacement cushions for Sony MDR monitor headphones in the MDR-V6, MDR-V7, and MDR-CD900ST family. They are also marketed as compatible with other headsets that share the same earpad size, but the safest bet is to confirm your headphone uses the same earpad form factor as the MDR-V6/V7/CD900ST style.
Comfort and build, based on the pad design
Breathable mesh surface for warmer sessions
The outer layer uses sports mesh fabric. Compared with coatings that can flake over time or feel sticky with sweat, mesh-style fabric is often preferred for day-to-day use, especially if you wear your headphones for long editing sessions, gaming, or recording while moving around.
Memory foam that aims to hold its shape
Inside, the pads are filled with high-density memory foam described as slow recovery. In practice, this usually matters for two reasons: cushioning comfort over time and maintaining a consistent seal against the ear for better outside-sound reduction.
Stitching and seam reinforcement for longer wear
These pads emphasize durability with stitching on the inside seam, designed to resist cracking over longer use. If you are replacing pads because your current pair is breaking down, this kind of construction detail is worth paying attention to.
Installation and fit quality
Reviewers commonly mention that the vinyl lip on the backside helps the pad sit into the headphone’s plastic groove, and that rotating or sliding the pad helps it “seat” evenly all the way around. That matters because even small gaps can reduce the outside-noise reduction you are expecting and can slightly change perceived bass or imaging.
Pros and cons, who should buy
Best for
- Owners of Sony MDR-V6, MDR-V7, or MDR-CD900ST who need replacement cushions.
- Buyers seeking a breathable, less sweat-prone alternative to older coatings.
- People who want comfort-first padding, with a tighter seal for desk noise reduction.
- Anyone replacing pads that have started flaking or feeling worn.
Not ideal for
- Shoppers with headphones that do not match the MDR-V6/V7/CD900ST earpad size and shape, since fit is the biggest determinant of results.
- Buyers who are extremely sensitive to micro-changes in sound, where seal differences and pad thickness can affect perceived bass.
Are they worth it?
If your MDR pads are aging, flaking, or just uncomfortable during longer sessions, these mesh memory-foam cushions are a straightforward, comfort-focused refresh. The buyer pattern leans toward “easy to install, comfortable, and more effective at keeping out everyday desk noise,” with no strong recurring complaints about fit once installed correctly. If you buy for sound changes alone, treat that as secondary, and prioritize matching your headphone model and ensuring a fully seated seal during installation.
Price and availability
These pads are currently listed in the US market, with an available price point shown on the product listing page. Since prices can move, it’s worth checking the latest number before you decide.
FAQ
Will these work with my Sony MDR-7506?
They are designed for MDR-V6, MDR-V7, and MDR-CD900ST models, and they are marketed for Sony MDR 7506 use as well. If your headphone is the MDR-7506 family, they are intended to be a direct replacement. If you have a different model, check that it uses the same earpad size and mounting style.
How comfortable are the mesh pads compared with older leather-like pads?
Buyers often prefer the breathable mesh surface for comfort during longer sessions, especially if previous pad materials flaked or felt sticky with sweat. The memory foam also supports a cushioned, form-fitting feel.
Do they improve noise isolation?
They are filled with high-density memory foam and buyers report reduced outside sounds (for example, desk activity) when the pads are seated properly. Real-world isolation depends on the seal and fit you achieve during installation.
Are they easy to install?
Reviewers describe installation as straightforward, with the backside lip helping seat into the headphone groove. Taking a moment to rotate or slide the pad so it sits all the way around can help the fit feel secure.
Will thicker pads change the sound?
Some buyers note cushioning thickness did not noticeably alter frequency response for their listening. Still, any pad replacement can subtly change perceived bass depending on how far the driver sits from your ear and the seal quality, so results can vary by fit.
How durable are these ear pads?
Durability is supported by design choices like stitched inside seams intended to resist cracking. Buyer sentiment generally aligns with the idea that these are built to last longer than older flaking coverings.
Specifications
| Product Title | Replacement Ear Pads for Sony MDR 7506 - GVOEARS Earpad Mesh Fabric Cushions for MDR V6 V7 MDR-CD900ST Headphones with Memory Foam (Black) |
|---|---|
| Category | Electronics > Headphones, Earbuds & Accessories > Earpads |
| Brand | G GVOEARS |
| Manufacturer | G GVOEARS |
| Color | Black |
| Material | Mesh Fabric with Memory Foam |
| Enclosure Material | Mesh Fabric with Memory Foam |
| Compatible Devices | compatible with Sony MDR 7506 / MDR V6 / MDR V7/ MDR-CD900ST headphones |
| Item Dimensions | 4.17 x 3.54 x 1.2 inches |
| Compatible Headphone Models | Sony MDR-7506, Sony MDR-CD900ST, Sony MDR-V6 |
| Warranty Description | 180 days |
| Item dimensions L x W x H | 4.17 x 3.54 x 1.2 inches |
Available variants
Material Type
- Velour Brown
- Mesh Fabric with Memory Foam
- Leather
- Mesh-Red
- Velour
- Ice Silk Fabric
- Cooling Gel
Recommended next
Replacement Ear Pads for Skullcandy Crusher Wireless/Evo/ANC Hesh 3/EVO/ANC, Headphones Earpad Cushions, Headset Ear Covers Also Fit Skullcandy Venue Wireless Headphones
These Niukeke replacement ear pads are made to restore comfort and sound performance for multiple Skullcandy models, using foam cushioning with a leather-style outer. The fit is described as snug, but installation can feel tricky for some users.
Foam Masters Ultra-Premium Memory Foam Ear Tips for AirPods Pro 3rd Gen (2025)
Foam Masters’ memory-foam ear tips are designed to upgrade comfort and sealing for AirPods Pro (3rd gen). Reviewers commonly mention a more secure fit, improved isolation for active noise cancellation effectiveness, and a better bass “thump,” with the main tradeoffs being the need to find the right fit and potential discoloration of white tips over time.
SoloWIT Replacement Earpads Cushions for Bose QuietComfort 35 (QC35) & Quiet Comfort 35 II (QC35 II)
SoloWIT replacement earpads are designed specifically for Bose QC35 and QC35 II headphones, aiming to restore comfort and a better seal for improved noise isolation. Buyers highlight a close fit, softer “protein leather” feel, and straightforward installation, with durability that varies by use.
![Gcioii 3 Pairs for AirPods Pro 3 Ear Hooks Covers (2025) [Added Storage Pouch] Anti Slip Sport Ear Tips Accessories Compatible with Apple AirPods Pro 3rd Generation (White)](/product-images/019ed146-73e9-7fee-96f5-a18ae4f8de26-0-19469d6c4365.webp)
Gcioii 3 Pairs for AirPods Pro 3 Ear Hooks Covers (2025) [Added Storage Pouch] Anti Slip Sport Ear Tips Accessories Compatible with Apple AirPods Pro 3rd Generation (White)
Gcioii’s ear hook covers are designed to help AirPods Pro 3 stay put during workouts, with an ergonomic hook shape and dual-hardness silicone tips. The tradeoff: you’ll need to remove the hooks to use the charging case, so they’re best for buyers who prioritize secure fit over quick on/off charging convenience.