Replacement Battery 300-10186 for ADT Command Smart Security Panel 7500mah 3.6V 27Wh
Quick take
This is a replacement Li-ion battery pack intended for specific ADT Command touchscreen panels that use part number 300-10186. Buyers who installed it report the panel typically recognizes the new battery and resolves low/absent battery warnings, but compatibility is crucial, and one limited report suggests a battery may arrive dead or defective.
Pros and cons
Pros
- Built for the ADT Command panels that list part number 300-10186, with a 3.6V Li-ion 7500mAh (27Wh) design.
- Designed to include multiple protection features (over-charge, over-discharge, over-heat, over-current, short-circuit).
- Many buyers report a correct physical fit and straightforward replacement.
- Common outcome reported: the security panel works normally after the swap.
Cons
- Not compatible with certain ADT systems (for example ADT Lynx and several QuickConnect products), so double-check your panel model.
- Limited evidence on long-term runtime across all users, since most feedback focuses on installation success and warning resolution.
- There is at least some risk of receiving a battery that does not perform, based on a single low-rating report.
What buyers think
Buyer-review evidence is mostly about fit and install, and it clusters around a simple theme: when this battery matches the right ADT Command panel model, the system generally recognizes it and the “low battery” or “absent battery” issue is resolved. Several reviews describe a quick, practical swap process (opening the panel, unplugging the old battery, plugging in the new). The main caution from buyer feedback is that compatibility matters, and there is limited but real evidence that a replacement unit can be unusable on arrival, so it’s worth verifying part number and panel model before installing.
What this battery is (and what it replaces)
The Replacement Battery 300-10186 for ADT Command Smart Security Panel is a rechargeable lithium-ion (Li-ion) pack rated at 3.6V and 7500mAh (27Wh). It’s intended as a direct replacement battery for the ADT Command touchscreen security panels that use part number 300-10186 and support the listed battery voltage range (3.6V / 4.2V).
Compatibility you should confirm before buying
Choose this battery only if your ADT Command panel matches the compatible models listed for part number 300-10186. It is intended for ADT Command 5-inch touchscreen panels (ADT5AIO-1, ADT5AIO-2, ADT5AIO-3) and ADT Command 7-inch touchscreen panels (ADT7AIO-1), as well as ADT 2X16 AIO panels (ADT2X16AIO-1, ADT2X16AIO-2).
It is not compatible with certain other ADT systems, including ADT Lynx Alarm Security Panel and ADT Pulse TS Keypad, along with some QuickConnect models. If you are unsure which system you have, verify the panel model number on your device before ordering.
Key specs that matter in real use
Voltage, capacity, and chemistry
- Voltage: 3.6V
- Capacity: 7500mAh (27Wh)
- Chemistry: Li-ion, rechargeable
Physical fit
The battery’s dimensions are listed as 68.80 x 55.40 x 18.80mm, with a net weight of 146.2g. That matters because even when voltage looks right, an incorrect form factor can prevent a clean installation.
Protection features
The battery is described as including protections against over-charge, over-discharge, over-heat, over-current, and short-circuit. These are safety-focused features that can help protect the battery and the panel’s power system under fault conditions.
Installation experience based on buyer reports
Across the review themes, buyers who were confident about compatibility often describe a quick replacement process. Reports mention the system recognizing the replacement battery soon after installation, and in at least some cases, resolving low or absent battery warnings while leaving other peripherals functioning normally. If you’ve never opened your ADT Command panel before, the main practical barrier is not the battery itself, but verifying that you are working on the correct model and part number (300-10186).
Pros and cons (who should buy, who should avoid)
This battery is a good fit for
- You own a compatible ADT Command touchscreen panel and need a replacement for part number 300-10186.
- You’re dealing with a low battery or battery alert and want a straightforward replacement part.
- You want a spec-matched battery (3.6V, 7500mAh, 27Wh) with built-in safety protection features.
You may want to skip it if
- Your ADT panel is a different platform than the listed ADT Command models, especially QuickConnect or Lynx-related systems.
- You cannot confirm your panel model number or part number before ordering.
- You are not comfortable doing the physical swap inside the panel.
Verdict: is it worth it?
If you have an ADT Command touchscreen panel that matches the specified compatible models for part number 300-10186, this replacement battery is a sensible buy. The strongest buyer signal is that correct compatibility leads to successful recognition and normal operation after installing the new battery. The main caveat is the one that applies to all replacement parts, check compatibility carefully, because the battery is not meant for every ADT system, and limited feedback includes the possibility of a defective or unusable unit on arrival.
Price and availability
This replacement battery is listed as available in the United States. For the most current pricing and shipping details, check the button below.
FAQ
Replacement battery 300-10186 for ADT command smart security panel 7500mah 3.6V 27Wh
What ADT panels is this battery compatible with?
It’s intended for ADT Command touchscreen panels that correspond to part number 300-10186, including ADT5AIO-1, ADT5AIO-2, ADT5AIO-3, ADT7AIO-1, ADT2X16AIO-1, and ADT2X16AIO-2. It is not compatible with certain other ADT systems such as ADT Lynx and some QuickConnect products.
What are the battery voltage and capacity specs?
This replacement battery is rated at 3.6V and 7500mAh (27Wh), using Li-ion chemistry.
Will the panel recognize the battery after installation?
Buyer reports commonly describe the panel recognizing the replacement when compatibility is correct, with the battery alert typically improving after the swap.
Does it include any safety protections?
The battery is described as having protection against over-charge, over-discharge, over-heat, over-current, and short-circuit conditions.
Is this battery good for anyone with a different ADT system?
No. If your panel is not one of the listed ADT Command models for part number 300-10186, you should not assume compatibility. Check your panel model number first.
Specifications
| Product Title | Replacement Battery 300-10186 for ADT Command Smart Security Panel 7500mah 3.6V 27Wh |
|---|---|
| Category | Electronics > Security & Surveillance > Home Security Systems |
| Brand | TAKOCI |
| Manufacturer | TAKOCI |
| Model Name | 300-10186 |
| Model Number | 300-10186 |
| Item Weight | 5.29 ounces |
| Number of Batteries | 1 Lithium Ion batteries required. |
| Built-In Media | Batteries |
| Battery Capacity | 7500 Milliamp Hours |
| Voltage | 3.6 Volts |
| Reusability | Rechargeable |
| Amperage | 3.6 Amps |
| Unit Count | 1.0 Count |
| Battery Weight | 146.2 Grams |
| Item Dimensions | 3.86 x 2.72 x 0.91 inches |
| Battery Cell Type | Lithium Ion |
| Battery Cell Composition | Lithium Ion |
Recommended next
SABRE 110dB Door Handle Alarm, Extremely Loud Wireless Audible Up to 680 Ft Away
A compact, vibration-triggered door handle alarm that hangs on your inside doorknob or handle to create an audible alert when someone tries the door from outside. It’s best for renters, travelers, and anyone who wants a simple, no-wiring add-on, but it runs on AAA batteries and relies on proper mounting and battery access for day-to-day use.
SimpliSafe 8 Piece Wireless Home Security System
A compact, wireless home security starter kit designed for quick DIY setup and simple smartphone control. It includes entry sensors, a motion sensor, a keypad, and a panic button, with optional 24/7 professional monitoring for faster emergency response.
SimpliSafe 9 Piece Wireless Home Security System w/HD Camera
A no-contract, wireless home security bundle with a base station, keypad, entry sensors, motion sensors, and an indoor HD camera. It’s designed for quick DIY setup and app control, with optional 24/7 professional monitoring for added reassurance and priority response when video verification is enabled.
Mighty Mule Wireless Digital Keypad (FM137), Black, 25
The Mighty Mule FM137 wireless digital keypad is a weather-resistant, DIY-access control accessory for compatible Mighty Mule gate openers. It supports up to 25 PIN codes, including temporary codes that can expire in days, and it can be installed wirelessly within 50 feet (battery-powered). It is a solid fit for homeowners who want convenient keyless entry, with the main caveat being battery replacement and moderate durability limits in harsher or heavier-use conditions.