Replace for Brother Label Maker Tape TZe TZ 12mm 0.47 Laminated White Tape TZe-231 (5-Pack)
Quick take
This 5-pack of 12mm (0.47 in) laminated white label tape is made to match Brother P-touch TZe231-style cartridges, using black ink printing and a durable, high-contrast look. It is a good value option for people who label often, especially for organization and everyday storage. The biggest buying caveat is compatibility (it is not for every Brother tape format), and some buyers note the backing can be less convenient to peel in single-label increments than branded cartridges.
Pros and cons
Pros
- 12mm wide laminated white tape designed for black-on-white labeling (TZe231-style).
- Backed for frequent use, with durability claims including resistance to water, fade, and temperature swings.
- Pre-cut backing and easy loading for many users, with clean, readable printed text.
- 5-pack format helps stretch label budgets versus buying single cartridges.
Cons
- Compatibility depends on using a TZe231-compatible Brother P-touch model and cartridge style.
- Backing peel convenience may be harder than branded tapes when cutting one label at a time.
- Not compatible with M-K tapes, and not compatible with PT-N(Btag) and TC labeling tapes.
What buyers think
Buyer-review evidence is generally consistent around loading and print readability. Many users describe the tape as an easy install and a reliable replacement, with lettering that remains clear and high contrast. Print output is commonly reported as crisp, and a range of labeling tasks (classroom organization, storage labeling, and general organization) is mentioned as benefiting from the look of black text on white tape. There are also a limited number of notes about handling, specifically that the backing can be thinner and may take a bit more effort to peel when you want to remove and cut labels individually.
What this tape is for
This label tape is built for Brother P-touch label makers that use TZe231-style cartridges, with a 12mm (0.47 in) tape width. The intended result is clean, uniform labels in black on white, which work well for labeling containers, files, binders, and wire or cable organization where a simple, high-contrast label stands out at a glance.
Compatibility: the part you should double-check
To avoid wasted cartridges, confirm your printer model and tape format match this TZe231-style replacement. This tape is marketed as compatible with a long list of Brother P-touch models, including common options such as PT-D210, PT-D220, PT-H110, PT-H111, PT-D200, PT-D400, PT-1230PC, PT-D610BT, and PT-2430PC, among others.
It is specifically noted as not compatible with M-K tapes, and not compatible with PT-N(Btag) and TC labeling tapes. If your printer uses a different Brother tape family, the cartridge will not fit or will not be usable.
Tape size and print format
- Width: 12 mm (0.47 in)
- Length per pack: 26.2 ft (8 m) per tape cartridge
- Pack size: 5 cartridges
- Finish: laminated
- Print color: black text on white tape
Durability and label performance
The laminated design is meant for labels that hold up in real-world conditions. Durability claims include resistance to water, fade, sunlight, and temperature extremes (from -22°F / -30°C to 258°F / 120°C). That makes this a practical choice for labels that may face humidity, outdoor-adjacent environments, or everyday wear-and-tear around workspaces.
Pros and cons in real use
When it makes sense to buy
- You label frequently (classroom, office, home organization, or equipment setup) and want a multi-pack to reduce repeated purchases.
- You want black-on-white text that stays readable and looks uniform across many labels.
- Your Brother P-touch model is confirmed to support TZe231-style 12mm laminated tapes.
When you might want a different option
- You only make a label or two at a time and prefer the easiest possible backing peel for individually cut labels. Some buyers report the backing is thinner than branded options, which can be more fiddly for one-by-one removal.
- You are not sure about your tape compatibility. If your printer uses a different tape family, you should shop by tape format first, not just printer model.
How it compares (by buyer priorities)
If your priority is value for frequent labeling
The 5-pack approach is built for higher-volume labeling. If you regularly produce dozens of labels, the multi-cartridge format can reduce the cost per project compared to buying single cartridges.
If your priority is easy label handling
For people who cut individual labels and peel each one right away, backing peel feel matters. The main tradeoff reported is that the backing can be harder to peel than branded tapes, especially when you want to remove labels one at a time.
If your priority is durability
The laminated construction and the stated resistance to water, fading, and temperature extremes make this tape a good fit for labels that need to last beyond just short-term organization.
Verdict
Replace for Brother TZe231-style 12mm laminated white tape is a practical, budget-friendly pick for shoppers who need reliable black-on-white labels for a compatible Brother P-touch printer. It has a strong track record for readable print quality and straightforward loading. Just make sure you match the TZe231 format, and be prepared for slightly different backing peel convenience if your workflow is centered on cutting and removing single labels quickly.
FAQs
Is this tape compatible with Brother P-touch TZe231 cartridges?
It is designed as a TZe231-style replacement for compatible Brother P-touch label makers that accept that tape family and 12mm format. Double-check your model and tape family before ordering.
What size is the label tape?
The tape is 12mm wide (0.47 in), with 26.2 ft (8 m) length per cartridge. This listing is a 5-pack.
What does the tape look like when printed?
It produces black ink text on white tape with a laminated finish, intended for high-contrast, readable labels.
How durable are these laminated labels?
The tape is laminated and is marketed as resistant to water, fade, sunlight, and temperature extremes (from -22°F / -30°C to 258°F / 120°C).
Does it leave sticky residue when removed?
It is marketed as removing smoothly when you need to replace labels, without leaving sticky residue.
Is it easy to remove the backing?
Many buyers find setup straightforward, but some mention the backing can be thinner and slightly harder to peel than branded cartridges, especially when removing labels one by one.
Is this tape compatible with M-K, PT-N(Btag), or TC tapes?
No. It is specifically noted as not compatible with M-K tapes, and not compatible with PT-N(Btag) and TC labeling tapes.
Specifications
| Product Title | Replace for Brother Label Maker Tape TZe TZ 12mm 0.47 Laminated White Tape TZe-231 Compatible with P-Touch 1/2" Black on White TZE231 for PT-D220 D210 H110 D200 D400 1280 D610BT Ptouch Refills, 5-Pack |
|---|---|
| Category | Electronics > Accessories & Supplies > Office Electronics Accessories > Labeling Tapes |
| Brand | COLORTY |
| Manufacturer | COLORTY |
| Model Number | CLT231-5 |
| Color | Black on White |
| Material | Polyethylene Terephthalate |
| Size | 12mm |
| Brand Name | COLORTY |
| Unit Count | 5.0 Count |
| Number of Items | 5 |
| Manufacturer Part Number | CLT231-5 |
| Finish Type | Laminated |
| Item Shape | Rectangular |
| Ink Color | black |
| Number of Labels | 5 |
| Line Size | 12 Millimeters |
| Material Type | Polyethylene Terephthalate |
Available variants
Color
- Black on Clear
- Black on White
- Pastel Pink/Blue/Purple/Berry Pink/Lime Green
- Turquoise/Berry Pink/Blue/Green/Satin Gold
- Pastel Blue/Pink/Purple/Mint Green/Lemon Yellow
- Black on Yellow
Size
- 12mm
- 24mm
- 18mm
Number Of Items
- 5
- 4
Recommended next
Label KINGDOM 91330 Compatible Dymo LetraTag Refills White Paper Label Maker Tape (12mm x 4m), 5-Pack
If you use a Dymo LetraTag label maker and want white paper labels that are easy to load, read cleanly, and stick without residue, the Label KINGDOM 91330 5-pack is a practical refill option. It’s built for 12mm (1/2") LetraTag refill compatibility and targets everyday organization, storage labeling, and office/home crafts.
Labelife Replacement for Brother P Touch Label Tape 12mm 0.47 Laminated White (TZe-231) 4-Pack
A budget-friendly replacement tape for compatible Brother P-touch models, offering black ink on white 12mm (0.47 in) laminated labels in a 4-pack. Best for neat, long-term organizing where you want labels to stay readable and adhere securely, with the main caveat that it is not compatible with Brother tape types like “M” and “BTAG.”
Freshworld 3-Pack Label Maker Tape Compatible with DYMO D1 Label Tape
Freshworld’s 3-pack replacement label maker tape is designed for DYMO D1 label machines and comes in black-on-white 1/2 inch (12mm) rolls. It uses direct thermal printing (no ink/toner) and is positioned as a durable, high-adhesion tape option for indoor use and tougher environments. Best for DYMO LabelManager/LabelPoint users who want a compatible refill in a convenient multi-pack, with the main caveat that print sharpness may not match premium branded tape for everyone.
Colorty Replace for Brother P-Touch Label Maker Tape TZe 12mm
A 6-pack of laminated, multi-color 12mm (1/2 in) tape refills designed for compatible Brother P-touch models that use TZe-style labels. Best for color-coded organization where you want durable labels that hold up to everyday wear, including indoor and outdoor use.