Radar Mount Mirror Mount + Mirror Wire for Uniden Radar Detectors - DFR7 R3 R4 R7 R8 (4001109)

What buyers think

Buyer-review evidence points to a clear theme: the mount and overall install approach tend to work well when the vehicle’s powered mirror setup matches the kit’s intended connection. Many buyers describe the mount as sturdy and low-profile, with the detector sitting securely behind the mirror. Install experience is often characterized as straightforward, especially once the mirror comes off and the hardware is aligned. The included mirror tap wire is frequently considered useful, but some buyers report needing extra time or a different wiring approach due to mirror power behavior or cable length limitations in their specific vehicle.

What this kit is for

This is a two-part solution: a bracket that attaches your compatible Uniden radar detector to the rearview mirror area, and a mirror wire/power connection intended to run power using the existing powered rearview mirror connector. If you want a cleaner look than a suction setup and prefer a power source that can behave like a factory mirror accessory, this is the category this kit targets.

Compatibility and fit considerations

The kit is built for specific Uniden models listed for the DFR7 R3 R4 R7 R8 lineup. It also assumes your rearview mirror area has an appropriate powered connector to tap into (for example, mirrors that run accessory power due to dimming or other functions). If your vehicle’s mirror does not supply the expected powered behavior, you may still be able to power the detector, but it may require a different wiring method than the kit is designed around.

Installation overview (and where most people spend time)

Setup is positioned as simple in concept: mount the detector using the included clip/mount hardware, then connect the mirror wire by inserting pins into the +12VDC and ground positions in the mirror plug. In practice, review themes suggest the “how hard is it?” question depends on your vehicle.

• Mounting the bracket: Buyers often describe it as straightforward once the mirror is off, with hardware provided to match different mirror thicknesses.
• Power connection: Some installs are quick and work as intended, while other vehicles may require figuring out the correct power/ground pairing so the detector powers up normally and shuts off appropriately.
• Cable routing: The wire length may not be perfect for every dash and mirror geometry, which can lead some buyers to supplement or replace the wiring path.

Pros and cons, translated into real buying decisions

Who this is best for

• You drive a vehicle with a powered rearview mirror connector and want the cleanest, rear-mirror-centered install for a compatible Uniden detector.
• You prefer a more secure, low-profile mounting approach than suction-based setups.
• You’re comfortable spending a bit of time on wiring details if your first attempt does not match the expected on/off behavior.

Who should consider something else

• Your vehicle’s mirror power wiring is unknown or you want a guaranteed plug-and-play power behavior without any troubleshooting.
• You need a longer or different cable routing path than the included mirror wire accommodates.
• You are not matching the kit to a supported Uniden detector model.

Verdict

The Radar Mount mirror mount and mirror wire kit is a strong choice if you want a tidy rear-mirror install for a compatible Uniden radar detector and your vehicle’s powered mirror connection can support the intended power tap. The biggest potential friction point is vehicle-to-vehicle variation in mirror wiring behavior, so plan for some setup time if you discover the detector does not turn on or off exactly the way you expect.

Price and availability

Pricing can fluctuate, and availability may change quickly. Check the live listing for the most current price and stock status before ordering.

Buy on Amazon

FAQ

Is this mirror mount compatible with all Uniden radar detectors?

No. It is intended for specific compatible Uniden models in the DFR7 R3 R4 R7 R8 lineup. Double-check your detector model before purchasing.

Does the kit power the detector through the rearview mirror connector?

Yes. The kit is designed to use the existing powered rearview mirror connector by connecting the included mirror wire to the mirror plug’s +12VDC and ground positions.

Will my radar detector turn on and off automatically with the car?

Many installs are successful, but mirror power wiring behavior can vary by vehicle. If the detector shows low-voltage behavior or does not switch on and off as expected, you may need to verify the correct power/ground wiring combination for your mirror.

Is the install difficult?

Most buyers describe the mounting portion as straightforward. The wiring step can be simple if your vehicle’s mirror connection matches what the kit expects, but it may take extra troubleshooting if it does not.

What if the mirror wire length is not enough for my vehicle?

Cable length needs can vary. If routing leaves the cable too short for your specific vehicle layout, you may need to reroute carefully or use an alternative wiring solution.

Does this mount work in vehicles without an electrically powered rearview mirror?

The kit is meant for vehicles with the appropriate powered rearview mirror connector behavior. If your mirror is not electrically powered in the compatible way, you may need a different power approach.

Recommended next

Power & Ground Cable $44.99

★★★★★ 4.8/5 2,258 ratings

GS Power 16 Gauge Wire 100ft Oxygen Free, OFC Pure Copper Electrical 12v Low Voltage Speaker Wire Spool

GS Power’s 16 gauge OFC pure copper speaker wire comes in a 100 ft red/black spool for common 12V and low-voltage wiring jobs. Expect flexible handling, PVC insulation suited to automotive style environments, and temperature tolerance down to -40°F, with an “all-copper, not CCA” focus that shoppers tend to appreciate.