Plustek 2 x 35 mm Mounted Slide Holders (Positive), for OpticFilm 72~83 Series use only (8100 & 8200i & 8300i)
Quick take
These Plustek mounted slide holders are designed specifically for 35 mm positive slides and provide two additional holders for compatible OpticFilm 72 to 83 series scanners. They are meant to make large scanning batches easier by letting you load slides while the scanner is running. The biggest buying caveat is fit and compatibility, these are for specific OpticFilm models only.
Pros and cons
Pros
- Made for 35 mm mounted positive slides, ideal if you shoot or archive slides.
- Two-holder bundle (2 units) helps reduce downtime during batch scanning.
- Buyers describe the slides as fitting well, with easy install and removal.
- Works as an accessory or replacement slide holder for compatible Plustek OpticFilm scanners.
Cons
- Compatibility is limited to OpticFilm 72 to 83 series models (8100, 8200i, 8300i listed).
- This is for positive slides only, it does not include a negative holder in the bundle.
What buyers think
Buyer-review evidence is consistent on usability and time-saving during slide digitizing. Multiple reviewers mention that the holders fit slides properly and are straightforward to install and remove. Reviews also highlight the practical workflow benefit of having extra holders, such as loading slides in one holder while scans run in another, which can speed up big projects. Overall sentiment about the holder’s role as a convenient accessory or replacement is positive, though review detail focuses more on day-to-day handling than on technical imaging performance.
What this accessory is for
If you already own a compatible Plustek OpticFilm scanner and you scan 35 mm mounted slides, extra holders can make a noticeable difference. Instead of stopping to reload each time you start a new set, you can keep prepared slide sets ready to swap in and out as you move through batches.
Compatibility and fit: the make-or-break detail
This accessory is intended for use with OpticFilm 72 to 83 series scanners, including the 8100, 8200i, and 8300i. Before buying, confirm your exact scanner model, since slide holders are not universally interchangeable across different scanner families.
Slides, not negatives: plan your kit
This listing is for positive slide holders. If your project includes 35 mm negatives as well as slides, you will want the corresponding negative holder accessory for your scanner system. Having the right combination matters for avoiding extra rework or missing insert capacity.
Workflow benefits during batch scanning
Reviewers repeatedly connect these holders to smoother scanning sessions. When you have multiple holders, you can keep one prepared while another is actively being scanned. That reduces the “dead time” between scans and can help if you are working through hundreds or thousands of slides.
Pros and cons recap
When these holders are a good match
- You have a compatible Plustek OpticFilm 72 to 83 series scanner.
- Your archive includes 35 mm mounted positive slides.
- You want to increase throughput by swapping preloaded holders.
When you should look elsewhere
- You do not have one of the compatible OpticFilm models listed for this accessory.
- You need negative scanning capacity, not just positive slides (you’ll likely need the negative holder accessory too).
Value: how to judge whether it’s worth buying
These holders are best viewed as a productivity upgrade, adding capacity and faster handling for repeat scanning. If you only scan occasionally, a single holder may be enough. If you scan in batches or you are digitizing a large slide collection, extra holders can reduce friction and keep your project moving.
Alternatives to consider
- Stick with the included holder: If you scan small batches, you may not need extra capacity right away.
- Get the negative holder separately: If your collection mixes formats, prioritize the correct holders for each media type so you can scan both efficiently.
- Check for replacement versus upgrade: If the original slide holder is lost or damaged, replacing the holder can restore normal workflow without changing your scanning setup.
Price and availability
Pricing can change, so check the current offer before you buy. Use the button below to view the latest price and availability on Amazon.
FAQ
Do these slide holders work with my Plustek OpticFilm scanner?
They are intended for OpticFilm 72 to 83 series scanners, including the 8100, 8200i, and 8300i. If your model is outside that range, compatibility may not be guaranteed.
Are these holders for positive slides or negatives?
These are for positive 35 mm mounted slides. They are not a negative holder bundle.
How many holders are included?
The bundle includes two mounted slide holders.
Will this help me scan faster?
Extra holders can improve batch workflow by letting you load slides while scans run in another holder. This is a common reason buyers choose additional holders.
Are the slides easy to load and remove?
Reviewers describe the slide fit as good and the process as easy, which is important for repetitive scanning sessions.
What if my project includes both slides and negatives?
You’ll want the matching accessory for negatives in addition to these slide holders so you can scan each format efficiently with the correct inserts.
Specifications
| Product Title | Plustek 2 x 35 mm Mounted Slide Holders (Positive), for OpticFilm 72~83 Series use only (8100 & 8200i & 8300i) |
|---|---|
| Category | Office Products > Office Electronics > Scanners & Accessories > Scanners > Slide & Negative Scanners |
| Brand | plustek |
| Manufacturer | Plustek |
| Item Weight | 0.11 Kilograms |
| Scanner Type | Film |
| Connection Type | USB |
| Resolution | 3600 dpi |
| Color Depth | 48 NA |
| Optical Sensor Technology | CCD |
| Media Type | Slide |
| Minimum System Requirements | Windows 7 |
| UPC | 783064709118 |
| Unit Count | 2.0 Count |
| Connectivity Technology | USB |
| Maximum Media Size | 2 x 3 inches |
Recommended next
KODAK Slide N SCAN Film & Slide Scanner Digitizer with 5” LCD Screen
The KODAK Slide N SCAN is an at-home film and slide digitizer designed to convert 135, 126, and 110 film and 50mm slides into JPEGs, with a built-in 5” LCD for previewing and a single-touch Scan workflow. It is a solid fit for simple, desk-friendly archiving, with the main tradeoff being that you need an SD/SDHC card (up to 32GB) to save files.
Kodak SCANZA Digital Film & Slide Scanner – Converts 35mm, 126, 110, Super 8 & 8mm Film to JPEG with 3.5" LCD
The Kodak SCANZA is a stand-alone film scanner that converts developed 35mm, 126, 110, Super 8, and 8mm negatives and slides into JPEG files for quick digital archiving. It’s straightforward to use with built-in inserts/adapters and a 3.5-inch tilt LCD, but it is not a flatbed and scan quality will not match dedicated higher-end scanning setups.
Plustek OpticFilm 8200i SE , 35mm Film & Slide Scanner
The Plustek OpticFilm 8200i SE is a dedicated 35mm film and slide scanner aimed at people who want high-detail scans (up to 7200 dpi) and more automation for dust and scratches via an integrated infrared channel. It can deliver strong scan quality for negatives and mounted slides, but the software learning curve and scanning speed trade off will matter if you plan large batch digitizing.
KODAK Slide N Scan Max Digital Film Scanner - Black/Yellow - Tiltable 7-Inch LCD with Gallery Mode & Photo Scanner Preview - Quick-Feed Tray for Slide Digitizer
The KODAK Slide N Scan Max is a simple, SD-card based film slide and negative scanner built for quick, at-home digitizing. It pairs a tiltable 7-inch LCD preview with easy, one-touch scanning and a quick-feed tray workflow, but it is best suited for “good enough” personal archive quality rather than pro-grade results.