Phone Wallet Stick on,5Pack Phone Card Holder for Back of Phone Case,Silicone Sticky Credit Card Holder for Cell Phone Double Pocket Sticker All Smartphones—Navy,Sierra,Pastel,Blue,Black
Quick take
This silicone adhesive phone card holder set is built for a slimmer carry, sticking to the back of your phone case so you can travel with cards and a little cash instead of a bulky wallet. Its two-pocket design is intended to hold up to four cards, and buyers generally report the cards stay put and the holders hold on. The main caveat is surface compatibility, it is not suitable for anti-fingerprint glass, and it works best when the phone case back is flat.
Pros and cons
Pros
- Two pockets designed for up to four cards, plus small essentials like cash or ID
- Silicone build intended to resist deformation and keep its shape
- Strong adhesive intended to stay put and not leave sticky residue when removed
- Raised wavy stripe design for better grip so cards are less likely to shift
Cons
- Better fit for flat, compatible surfaces, it is not recommended for anti-fingerprint glass
- The smaller overall pocket size can limit how you load it (some buyers prefer a larger single pocket)
- Designed for cards and light items, it will not replace a full wallet for everyone
- Remove-and-reapply freedom is not emphasized, installation alignment matters
What buyers think
Buyer-review evidence is broadly positive for day-to-day usefulness. Shoppers commonly mention that the holders help them go out without a purse by carrying a phone plus cards and sometimes cash. Many describe the cards as staying secure in the slots, and several say adhesion holds well and the holders do not fall off during normal use. A recurring theme is that the pockets can fit around four cards, and the holders feel like good value for a low-cost multi-pack. Evidence is also limited but includes a note that it may take a little time to loosen cards for removal, and that accidental pulling by kids or pets can damage the slots (which may be relevant for households with small children).
What this phone wallet is, and how it works
These are thin silicone “sticker” card holders designed to attach to the back of your phone case. Each holder has two compartments (two pockets total), so you can separate cards into two stacks rather than relying on a single slot. The idea is simple: load a few essentials, press the holder onto a clean, flat area of your case, and keep your hands free while you commute, run errands, or work out.
Capacity and everyday carry: how many cards can you actually fit
The holder is designed to fit multiple cards at once, with two pockets intended to hold up to four cards total. That makes it a good match for people who carry a small set, like a primary card plus an ID and maybe one extra card. If your wallet typically holds many cards, frequent-use memberships, receipts, and bulky items, you may find two small pockets too limiting.
Adhesion and durability: will it stay on your case
Adhesion is a key selling point here. The silicone sticker design is intended to stick tightly for long-lasting everyday use and, importantly for buyers, not leave behind sticky residue when removed. The product also highlights performance even when exposed to heat, moisture, or sweat, which matters for active lifestyles or humid weather.
That said, installation still needs the right surface. The holder is not suitable for anti-fingerprint glass, and the back of your phone case should be flat so the adhesive makes full contact. If your case has a curved or textured back, adhesion may be less reliable.
Build quality and card retention
The holders use silicone with a non-deforming, non-pilling intent. There is also a raised wavy stripe design meant to improve grip, helping reduce card movement so cards do not slide out easily during movement.
Some buyers note the card fit can feel a bit snug at first, with the card removal process taking slightly longer until the pockets loosen up.
Color options and multi-pack value
This listing is a five-pack, and it comes in a set of different colors. That’s convenient if you want one on your daily phone case plus extras for a spare case, a backup, or a secondary device.
Value is a major theme in buyer feedback, with multiple shoppers highlighting that it feels inexpensive relative to the usefulness of being able to carry cards without a purse.
Who should buy this adhesive card holder
- You want a slimmer alternative to a bulky wallet for daily errands, commuting, or traveling light
- You prefer carrying a small set of essentials (around a few cards, ID, and possibly some cash)
- You want adhesive-backed convenience that is quick to set up on a suitable, flat case surface
- You like the flexibility of a multi-pack, so you can swap between cases
Who should skip it (or consider another style)
- You use a case with a textured or curved back, or you need a holder for anti-fingerprint glass surfaces
- You carry many cards and accessories, and you need a larger internal space
- You are sensitive to snug slot fit, or you want effortless one-finger card access right away
- You want something more protected than a back-of-phone accessory for very active environments (for example, if kids or pets regularly pull at accessories)
Alternatives to consider
If you are comparing adhesive card holders, the main decision factors are capacity, attachment method, and how secure the cards feel. Alternatives that may fit better depending on your needs include:
- Magnetic card holders: Consider these if you use a MagSafe-compatible case or want easier swapping between devices and less dependence on adhesive
- Flip-style phone wallets: These tend to offer more room and better card protection, but they are usually thicker than a back-sticker style
- Case-integrated card compartments: If you dislike adhesive entirely, an integrated solution can be sturdier but may reduce case flexibility
Verdict
This 5-pack silicone adhesive phone card holder is a solid pick if you want a thin, low-bulk way to carry a few cards and small essentials, and you’re using a flat, compatible phone case surface. It generally performs well for everyday convenience and card retention, but if you need more storage than a two-pocket layout or your case surface is not ideal for adhesive, you may be happier with a different wallet style.
FAQs
Will this work on any phone case?
It works best when the back of your phone case is flat. It is not recommended for anti-fingerprint glass surfaces.
How many cards can the holder fit?
The design is intended to hold up to four cards total, split between its two pockets.
Does it leave sticky residue when removed?
The adhesion is intended to hold firmly during use and not leave a sticky residue when you remove the holder.
Is it made of silicone?
Yes, the card holder is made from silicone.
What is the main use case for this type of wallet?
It is designed for a lighter carry, so you can keep your phone plus cards, ID, cash, and similar small essentials without carrying a traditional bulky wallet.
Specifications
| Product Title | Phone Wallet Stick on,5Pack Phone Card Holder for Back of Phone Case,Silicone Sticky Credit Card Holder for Cell Phone Double Pocket Sticker All Smartphones—Navy,Sierra,Pastel,Blue,Black |
|---|---|
| Category | Cell Phones & Accessories > Accessories > Adhesive Card Holders |
| Brand | Zemexy |
| Manufacturer | Zemexy |
| Model Number | ZG-021 |
| Color | Navy,Sierra,Pastel,Blue,Black |
| Material | Silicone |
| Item Weight | 0.09 Kilograms |
| Additional Features | Card Slot |
| Wallet Compartment Type | Credit Card |
| Number of Compartments | 2 |
| Number Of Pockets | 2 |
| Number of Sections | 2 |
| Wallet Card Slot Count | 2 |
| Style Name | Traditional |
| Pattern | Solid |
| Form Factor | Sticker" or "Adhesive |
| Theme | No Theme |
| Material Type | Silicone |
| Lining Description | Silicone |
| Product Care Instructions | Wet Wipe Clean |
| Brand Name | Zemexy |
| Included Components | Card Holder |
| UPC | 618528773209 |
| Manufacturer Warranty Description | 1 year |
| Manufacturer Part Number | ZG-021 |
| Unit Count | 5 Count |
Recommended next
TAURI 3 in 1 Magnetic for iPhone 13 Case, Compatible with MagSafe (Clear, with 2X Screen Protectors)
A slim, clear MagSafe-compatible iPhone 13 case bundle with tempered-glass screen protection. It’s built around strong magnets and drop-focused corners, and buyers like the look and day-to-day grip, with one common caution: the included screen protector can be more finicky to apply and may crack for some users.
ESR for MagSafe Wallet Stand with Grip, RFID Blocking, MagSafe Ring Included, 5 Cards Holder (Black)
ESR’s MagSafe wallet stand combines a card holder (up to 5 cards), RFID blocking, and a strong magnetic grip with an adjustable kickstand that works in both portrait and landscape. It’s a good fit for people who want card storage and hands-free viewing on compatible iPhones (and certain non-MagSafe cases via included magnetic rings), but it does not support Find My and it’s not compatible with certain mini models.
Hoblaze Phone Card Holder Stretchy Wallet Pocket Credit Card ID Case Pouch Sleeve Adhesive Sticker (3-Pack, Black)
The Hoblaze stretchy adhesive phone card holder is a slim way to carry up to about 5 cards and some cash without a separate wallet. It uses a 3M-style adhesive backing and a spandex (lycra) pocket design that flexes for easier card access. Main caveat: it can stretch out over time if you overfill it or expect it to last like a rigid wallet.
kate spade new york Morgan Magnetic Phone Wallet/Card Holder - Compatible with MagSafe Phones and Cases - Chalk Pink
kate spade new york Morgan is a MagSafe-compatible magnetic phone wallet that keeps cards, cash, and ID within easy reach. It uses a strong magnet to snap on and off, includes RFID-blocking material, and offers two interior pockets for up to 4 cards. The main tradeoff is price and a closure that some buyers find a bit less substantial than expected.