On Stage CM01 Video Camera/Digital Recorder Adapter
Quick take
The On Stage CM01 turns a standard 5/8"-27 microphone stand into a mounting point for a video camera or digital recorder using standard 1/4" threads. Its built-in ball head supports independent 360-degree pan and 180-degree tilt, making it useful for overhead angles and performance capture. The key buying caveat is ensuring your stand and accessory threads match, and confirming the mount can handle the rotational torque created by heavier gear and off-center weight.
Pros and cons
Pros
- Bridges 5/8"-27 mic stand threads to 1/4"-threaded camera or recorder mounts.
- Ball head allows 360-degree pan and 180-degree tilt for flexible framing.
- Stated for practical real-world use cases like mounting cameras/recorders on existing mic stands.
- Lightweight adapter design (0.25 lb) for easy setup alongside your existing stand.
Cons
- Rotational torque can be an issue with certain off-center accessories, which may require extra measures to prevent twisting.
- Cold-temperature conditions have been reported to affect a rubber component over time.
- Not a universal solution if your stand does not use the 5/8"-27 thread standard.
What buyers think
Buyer-review evidence is broadly positive on usefulness and versatility. Many buyers highlight that the adapter works as intended when mounting 1/4"-threaded gear (such as a digital recorder or DSLR) onto an existing mic stand or boom. Several reviews specifically mention getting better camera angles for overhead or multi-angle shots, which aligns with the adapter’s pan and tilt behavior.
Build and capability appear to hold up for typical small camera and recorder setups, with reviewers describing secure holding when used correctly. At least one review raises a rotational-torque concern when using an additional phone adapter on a boom, suggesting the stand-to-adapter connection may not resist twisting in the loosening direction without additional friction or thread-locking measures. There is also limited evidence of a rubber component separating after exposure to cold, suggesting some sensitivity to temperature changes.
How the CM01 adapter fits into your setup
The CM01 is designed for a straightforward goal: reuse a microphone stand (or boom) and mount video-capable gear without buying a dedicated camera tripod head. It attaches to a standard 5/8"-27 male mic stand connector and provides a 1/4"-male interface for cameras, camcorders, and digital recorders that accept 1/4" threads.
Once mounted, the built-in ball head gives you independent movement for framing. That helps for situations like capturing performances, recording lectures or classroom activities, or setting up cameras on overhead rigs where mic-boom sag would otherwise limit your angle.
Compatibility checklist before you buy
- Your stand thread: confirm the mic stand uses 5/8"-27 threading. If your stand uses a different thread size, the adapter may not seat properly.
- Your gear thread: confirm the device you want to mount has a 1/4" threaded mounting point (or that you have a compatible 1/4" accessory plate).
- Accessory layout: consider whether your mount creates off-center weight (for example, phone adapters or cages). That geometry can create rotational torque that you may need to manage.
Pros and cons in real use
Best for: quick camera or recorder setups on existing mic stands
This adapter is a good fit if you already own mic stand hardware and want to mount a camera, camcorder, or digital recorder with minimal additional gear. It is especially useful when you need the flexibility to pan and tilt for framing, like overhead shots or multi-angle recording on stage or in a classroom.
Who should consider alternatives
If you are building a long-term, heavier-camera rig, or you need fine-grained fluid movement, a dedicated tripod head may be more appropriate. The CM01 is also a poor choice if your mic stand does not use the 5/8"-27 standard, since compatibility is central to its purpose.
Durability and limitations to know
Review evidence suggests the CM01 holds securely for common camera and recorder mounting tasks, and buyers often describe it as sturdy yet lightweight for its role. The most notable limitations are practical rather than outright failures: torque from heavier or off-axis accessories can lead to twisting at the stand connection if not properly tightened or friction-enhanced.
There is also limited feedback about a rubber component separating after cold storage, which may matter if you plan to use the setup in very cold environments for extended periods.
Verdict
The On Stage CM01 is an effective, budget-friendly way to add camera and recorder mounting capability to a standard microphone stand, thanks to its 5/8"-27 to 1/4" thread adapter and adjustable ball head. It is a strong pick for overhead angles and compact gear setups, as long as you confirm thread compatibility and take rotational torque into account for any off-center accessories.
FAQ
What does the On Stage CM01 adapter connect to?
It attaches to a microphone stand with 5/8"-27 threading and provides a 1/4"-male mounting interface for gear that uses 1/4" threads.
Does the CM01 let you change camera angles?
Yes. The built-in ball head supports 360-degree pan and 180-degree tilt, which helps you frame shots without moving the entire stand.
Will it work with a DSLR or digital recorder?
It can work well for DSLR or digital recorder setups that have 1/4" threaded mounting points (or use a compatible 1/4" accessory). Heavier or off-center configurations may require extra attention to tightening and torque management.
Is the adapter compatible with any microphone stand?
No. The adapter is meant for stands that use the 5/8"-27 connector standard. If your stand’s thread size differs, you will likely need a different adapter.
What’s the main drawback to watch for?
The most common practical drawback is rotational torque with certain accessories, especially when the mounted device sits far from the ball joint. If you notice twisting, you may need to tighten carefully and consider adding friction or thread-locking measures.
Specifications
| Product Title | On Stage CM01 Video Camera/Digital Recorder Adapter |
|---|---|
| Category | Electronics > Camera & Photo > Tripods & Monopods > Tripod Heads |
| Brand | OnStage |
| Manufacturer | On-Stage |
| Model Number | CM01 |
| Color | Silver |
| Material | Stainless Steel |
| Item Weight | 0.25 Pounds |
| Brand Name | OnStage |
| UPC | 888365086460 659814509423 659814504534 604945296506 |
| Global Trade Identification Number | 00659814490899, 00659814509423 |
| Manufacturer Part Number | CM01 |
| Manufacturer Warranty Description | Manufacturer warranty. |
| Included Components | Adapter |
| Item Type Name | Mic Stand |
| Item Dimensions | 2 x 1 x 2 inches |
| Unit Count | 1.0 Count |
| Material Type | Stainless Steel |
| Mounting Type | Mic Stand |
| Smart Home Compatibility | Not Smart Home Compatible |
| Item dimensions L x W x H | 2 x 1 x 2 inches |
Recommended next
Manfrotto Video Head with Flat Base, Video Head for Compact review
The Manfrotto 502 video head (MVH502AH) is built for smooth, adjustable pan and tilt using a variable fluid drag system. It offers a large top plate and a generous sliding connection setup for DSLR and compact camera rigs, with built-in easy-link connectors for accessory mounting. Best suited to creators who want controlled, “buttery” camera moves, but it is a hefty head, and getting the fluid feel right takes a bit of dialing in.
NEEWER 3 Way Geared Tripod Head with 360° Panoramic Arca QR Plate, Millimeter Micro Adjustment (TH15)
The NEEWER TH15 is a geared 3-axis tripod head designed for photographers and video shooters who want more repeatable, millimeter-style adjustments than you get from a ball head. It pairs a millimeter micro adjustment system with a 360° pan Arca-type quick release plate, but it is not optimized for ultrafast, one-handed repositioning and it expects a solid tripod for best results.
NEEWER Tripod Fluid Head with +/-10° Leveling Base(37mm Dia.), Metal Pan Tilt Head with Arca Type QR Plate, Telescopic Handle (GM27)
The NEEWER GM27 is a compact metal fluid video head that adds a helpful +/-10° leveling base and smooth pan and tilt for travel, vlogging, and general DSLR or compact setups. It is best for lighter gear and buyers who value fast leveling and portability, but it may feel less confidence-inspiring for heavier lenses and the telescopic handle can be a practical annoyance if you use it on the left side.
NEEWER Low Profile Camera Tripod Ball Head, 36mm Metal Panorama Ball Head (GM36)
The NEEWER GM36 is a low-profile 36mm ball head with an Arca-style quick release plate, designed for DSLR, mirrorless, and camcorders. It aims to balance smooth, stable positioning with travel-friendly weight, but buyers should pay attention to thread compatibility and note that some panning and ball feel can vary based on setup and maintenance.