OCTOBUDDY Double
Quick take
The OCTOBUDDY Double is a silicone, non-adhesive suction phone mount that’s meant for hands-free selfies and video. It’s designed to grip smooth, non-porous surfaces using suction cups on both the front and back. The main caveat is that real-world holding power depends heavily on surface cleanliness, how firmly you mount it, and your phone case or back surface.
Pros and cons
Pros
- Double-sided suction approach (front and back) for a more secure hands-free setup.
- Non-adhesive mounting, so there’s no residue on surfaces like painted walls (when used properly on smooth areas).
- Detachable design that’s meant for frequent repositioning (ideal for creators who shoot in multiple locations).
- Care guidance is clear: press firmly for 10+ seconds, rinse suction cups to restore adhesion, and reattach periodically.
Cons
- Not water resistant, so it’s not a good fit for wet or rainy shooting conditions.
- Works best on smooth, non-porous surfaces, so textured or porous backgrounds can limit grip.
- Buyer feedback suggests outcomes can vary over time, especially with frequent removal and remounting.
- Not designed to be left unattended while mounted.
What buyers think
Buyer-review evidence is mixed, with the most consistent themes tied to adhesion behavior. Many reviewers report that it sticks well on flat, smooth surfaces when mounted correctly, and that it can be easy to attach without damaging surfaces or leaving residue. Others raise concerns about holding power, including instances where adhesion seems less reliable during active use or after some time. There is also feedback that it can partially peel on certain phone backs and that grip may improve when the phone back and case match the mount’s suction expectations.
What the OCTOBUDDY double is for
The OCTOBUDDY Double is built for creators who want a hands-free phone grip for selfies, vlogging, and short-form video. Instead of magnets or adhesive pads, it relies on suction cups plus a silicone pad to form a seal. That makes it appealing when you want to reposition quickly between takes, or when you want a non-adhesive option for smooth surfaces.
Key specs and design details
Detachable, non-adhesive suction mount
It’s designed to mount without adhesive, using silicone and suction. The goal is to keep your phone stable while you record, while avoiding sticky residue that can happen with some adhesive-style mounts.
Double-sided grip system
The mount uses suction cups on both the front and back areas to help secure the device during recording. In practical terms, the double-sided approach is meant to reduce wobble compared to simpler one-sided suction grips.
Compatibility and mounting surfaces
It’s intended for a range of phones including iPhone and Samsung Galaxy models, along with other compatible devices. It also depends on surface conditions. Suction typically needs a clean, smooth, non-porous surface to form a complete seal, which matters if you plan to shoot on walls, mirrors, glass, or other everyday backgrounds.
How to get the best suction (and avoid disappointment)
If you want the OCTOBUDDY Double to perform as intended, the mounting process matters. Use these practical steps:
- Start with a clean, smooth surface. Dust and grime can weaken the seal.
- Press firmly and give it time. Apply firm, sustained pressure for 10+ seconds to ensure full contact during the initial mount.
- Expect performance to change with wear. If grip starts to degrade, rinse the suction cups with warm water to remove dust and restore adhesion.
- Don’t leave it unattended. Even when suction is strong, it’s meant to be used with attention while recording.
- Be mindful of your case and back surface. Some users note better results with the right “flat” compatibility between the mount and the phone back or case.
Pros and cons for real buyers
Who it’s best for
- Social media creators who want a hands-free phone setup for filming and photos.
- People who shoot on smooth backgrounds like glass, tile, smooth walls, mirrors, or similar non-porous surfaces.
- Buyers who prefer non-adhesive mounting and want something that can be detached and repositioned between takes.
Who should skip it (or consider alternatives)
- Anyone planning wet-weather filming, since it’s not water resistant.
- Shoppers who need reliable suction on textured surfaces, since non-porous, smooth contact is important for forming a seal.
- People who want a set-and-forget mount, because it’s not intended to be left unattended while attached.
Price and availability
The OCTOBUDDY Double is listed in the under-$20 range, with a higher list price shown as crossed out. Availability is currently shown as in stock for US buyers. For the most accurate current price, check the live listing.
Verdict: is the OCTOBUDDY Double worth it?
The OCTOBUDDY Double is a solid choice if you’re filming on smooth, non-porous surfaces and you’re willing to take a moment to mount it correctly, including firm pressure and surface prep. If you need strong suction on textured backgrounds, want water-ready mounting, or expect a fully unattended “install and go” experience, you may be better served by a different grip style that matches your conditions more reliably.
FAQ
Does the OCTOBUDDY Double work on textured walls?
Suction generally requires a smooth, non-porous surface to form a complete seal. Textured or porous surfaces can prevent reliable adhesion.
Will it leave residue on walls or surfaces?
Because it’s designed to be non-adhesive, it’s intended to avoid adhesive residue when removed properly from suitable smooth surfaces.
How do I make the suction hold better?
Make sure the surface is clean and smooth, press firmly for at least 10 seconds when mounting, and follow basic care like rinsing the suction cups if adhesion fades.
Is it safe to leave my phone unattended while it’s attached?
No. The mount is intended to be monitored while your phone is attached.
Is the OCTOBUDDY Double water resistant?
No, it is not water resistant, so it’s not recommended for wet conditions or rain.
Will it work with phone cases?
It can depend on how the phone case sits and how flat the contact area is. Some buyers report better results with a compatible, flat phone back or case setup.
Still deciding? If you tell me your phone model, whether you use a case, and where you plan to film (glass, tile, painted wall, vehicle window, etc.), I can help you judge whether suction mounting is likely to work well for your use case.
Specifications
| Product Title | OCTOBUDDY Double - Silicone Double-Sided Suction Phone Case Detachable Mount - Hands-Free, Strong Grip Holder for Selfies & Videos - iPhone & Android Compatible - 2.5″ x 3.75″, Chalk Pink |
|---|---|
| Category | Cell Phones & Accessories > Accessories > Grips |
| Brand | OCTOBUDDY |
| Manufacturer | OCTOBUDDY |
| Model Name | OCTOBUDDY 1 |
| Model Number | OCTOBUDDY 1 |
| Color | Chalk Pink |
| Item Weight | 12 Grams |
| Compatible Phone Models | HTC, Samsung Galaxy, iPhone |
| Mounting Type | Non-adhesive |
| Additional Features | Hand Free |
| Water Resistance Level | Not Water Resistant |
| Item Dimensions | 2.25 x 3.25 x 0.25 inches |
| Unit Count | 52.0 Count |
| Enclosure Material | Silicone |
| Global Trade Identification Number | 00850053398353 |
| Mfr Part Number | OCTOBUDDY 1 |
| Warranty Description | 2 weeks if the product is defective |
| Built-In Media | Packaging and OCTOBUDDY pad |
| Special Feature | Hand Free |
Available variants
Size
- Double-sided
Color
- Chalk Pink
- Transparent
- Hot Pink
- Darth Vader
- Baby Blue
- Baby Blue Jay
Recommended next
Lamicall Cell Phone Ring Holder Stand - Phone Finger Grip Kickstand, 360° Rotation Polished Metal Grip for Magnetic Car Mount
A polished zinc-and-stainless steel phone ring that adds one-handed grip, a foldable kickstand feel, and easy rotation for portrait or landscape use. Buyers highlight strong, durable performance and reliable holding power, especially when paired with a magnetic car mount, with the main caveat being adhesive compatibility (it is not intended for all soft cases) and ring comfort for larger or smaller fingers.
PopSockets Adhesive Phone Grip, Holder, Phone Stand, Black - Knurled Texture Black
PopSockets PopGrip is an adhesive-backed phone grip that adds one-handed handling and a kickstand-style stand for propping up your phone. It features a swappable top for style changes without replacing the base, and it’s designed to work best on smooth, hard plastic cases. The main tradeoff is that the adhesive can be extremely hard to reposition once placed correctly.
PopSockets Phone Grip for MagSafe, Magnetic Holder, Phone Stand - Soft Touch Navy
A MagSafe-compatible PopSockets grip that snaps on magnetically, collapses for pocket carry, and works as a stand for hands-free viewing. Best for iPhone owners with MagSafe (and MagSafe cases) who want an easy on, easy off grip for texting and selfie-style use, with the main caveat being compatibility limits with certain case types.
Transparent Phone Ring Holder Grip - EI Sonador Clear Cell Phone Ring Stand Holder Finger Grip Kickstand
The EI Sonador transparent phone ring holder grip adds a secure finger loop and a rotating stand for easier one-hand use and hands-free viewing. Buyers consistently like the strong adhesive hold and the “jewelry-like” rhinestone look, with the main caveat being that it may not stay looking perfect forever (coating wear over time) and it relies on adhesive mounting.