NexiGo Lightweight Mini Tripod for Camera/Phone/Webcam, Extendable Stand, for NexiGo
Quick take
The NexiGo mini tripod is a lightweight, foldable stand designed for webcams and phones, using a standard 1/4-inch mounting screw and a ball-joint head for flexible aiming. It is a good fit for video calls, simple photo setups, and compact ring-light or phone mounting. The main caveat is that it is made from ABS plastic and is intended for lightweight devices (up to about 1 lb), so heavier camera rigs are not the goal.
Pros and cons
Pros
- Standard 1/4-inch mounting screw, plus an included smartphone holder with a 1/4-inch hole.
- Three height levels with an extendable range of about 3 to 13 inches.
- Ball-joint head supports 360-degree rotation and tilts up to about 90 degrees.
- Non-slip rubber pads help the stand stay put on flat surfaces.
Cons
- Plastic construction and an official lightweight limit make it less appropriate for heavier camera setups.
- Buyer-review evidence suggests it may not fit every branded webcam perfectly, depending on how it screws down.
- The phone clamp design is not universally loved, so tight grip confidence can vary by device size.
What buyers think
Buyer-review evidence is broadly positive on convenience and usefulness for lightweight gear. Reviews commonly highlight the compact, portable design, easy setup, and the included phone holder and rotation platform as practical add-ons. Stability is described as good enough for phone and webcam positioning on flat surfaces, and the quick height adjustment is generally appreciated.
Where buyers add nuance is in build expectations and fit. Several comments frame the tripod as “cheap but works,” meaning it can feel a bit flimsy compared with metal stands. There is also limited but relevant feedback that compatibility can vary by device, particularly how certain webcams screw onto the mounting interface. Finally, a few reviews point out that the ball head and phone holder can be less smooth or less confidence-inspiring than higher-end tripods, which matters if you frequently fine-tune angles.
Who this mini tripod is for
This is the kind of complete mini tripod that makes sense when you want a dedicated stand for a small setup without carrying a full-size tripod. It is especially well suited to:
- Webcam-based creators and meeting setups who want consistent framing with adjustable height and easy rotation.
- Phone shooters needing a compact stand for vertical or horizontal content, including setups next to lighting.
- Lightweight camera accessories that use a 1/4-inch thread, within the tripod’s lightweight intent.
- Travel, hiking, and small spaces where a foldable stand around 6.4 inches folded size is easier to pack.
Mounting and compatibility you should verify
The tripod uses a standard 1/4-inch screw and includes a smartphone clamp with a 1/4-inch mounting hole. That means most devices with a 1/4-inch threaded mount can be compatible, but fit can still depend on how a specific webcam or accessory’s threaded stem engages with the tripod’s mounting surface.
One review theme suggests that some branded webcams may not fully screw down or may behave differently than expected with certain mounting depth details. If you are planning to use a specific webcam model (especially one you already own), it is smart to confirm how it mates with a 1/4-inch interface, not just whether it “supports” 1/4-inch mounting in general.
Setup, height, and head movement
You get three adjustable height levels with an extendable range of about 3 to 13 inches. The ball-joint head is built for quick aiming, with 360-degree rotation and up to 90-degree tilt. For video calls, this is typically enough range to move between slightly higher eye lines and tighter compositions.
The practical workflow reviewers describe is straightforward: unfold, adjust the height, mount your device, then loosen the head screw to position and tighten it again. For small setups on desks or flat surfaces, this style of control is usually more about speed than precision micro-adjustments.
Stability and build quality, realistically
Materials are ABS plastic with non-slip rubber feet, and the tripod is designed for lightweight use (the listing notes use for webcams and up to about 1 lb for durability). Reviews frequently mention it is sturdier than expected for its size, but also characterize it as not “robust” in the way metal tripods are.
If your setup includes a heavier device, strong cable tension, or frequent accidental bumps, you should expect more limitations. For stable results, aim for a clean, flat surface and avoid aggressive repositioning once tightened.
Pros and cons compared side-by-side
Why you might choose it
- You want a compact, lightweight tripod that is easy to carry and quick to set up.
- Your device setup relies on 1/4-inch mounting, often for webcams, phones, or lightweight camera accessories.
- You want an included phone holder and a head that handles both rotation and tilt.
When it might not be the right pick
- You need higher rigidity for heavier cameras or longer, vibration-sensitive sessions.
- Your exact webcam accessory has mounting-depth quirks, and you cannot verify the screw-down fit ahead of time.
- You prefer a more premium-feeling ball head with smoother fine-tuning than budget plastic designs.
Price and availability
It is positioned as an affordable mini-tripod option, typically attractive for basic desk and webcam setups. Availability and current pricing can change, so it is worth checking the live listing before you commit.
Verdict
The NexiGo lightweight mini tripod is a practical, travel-friendly choice for webcam and phone mounting, especially when you value portability and simple aiming. It offers the right core features for desk content and video calls (height range, 360-degree rotation, and tilt), plus an included phone holder. Just keep your expectations aligned with its plastic build and lightweight focus, and double-check screw-down compatibility for your specific webcam or device.
FAQ
Does this mini tripod work with webcams that use a 1/4-inch mount?
It is designed around a standard 1/4-inch mounting screw and is intended for lightweight devices (listing guidance notes up to about 1 lb). If your webcam (or its mounting stem/accessory) uses a true 1/4-inch thread and screws down securely, it should be compatible. Some webcam fit can still vary based on how the mounting stem engages.
What is the height range?
The tripod supports three adjustable height levels, extending from about 3 inches up to about 13 inches.
Can it tilt and rotate for both portrait and landscape?
Yes. The ball-joint head supports 360-degree rotation and up to about 90-degree tilt, which is typically enough for landscape and portrait framing.
Is it stable enough for a phone?
Reviews generally describe it as suitable for phones on flat surfaces, and it includes a phone holder. Still, since it is made from ABS plastic and reviewers note the phone holder design is not perfect for every device, stability depends on your phone’s size and how securely it clamps.
Will it hold heavier cameras?
It is aimed at lightweight setups. The listing includes durability guidance for webcam use and notes a lightweight limit (about 1 lb). For heavier camera rigs, it is better to consider sturdier tripods built for more load.
Specifications
| Product Title | NexiGo Lightweight Mini Tripod for Camera/Phone/Webcam, Extendable Stand, for NexiGo Logitech Webcam C920 C922 C925e C922x C930e C930 C615 Brio and Other Lightweight Devices with 1/4" Thread |
|---|---|
| Category | Electronics > Camera & Photo > Tripods & Monopods > Complete Tripods |
| Brand | NexiGo |
| Manufacturer | NexiGo |
| Model Name | Lightweight Mini Tripod for Webcam |
| Model Number | NexiGo-TRIPOD-02-TC-BLK |
| Screen Size | 13 Inches |
| Color | Black |
| Material | Rubber Acrylonitrile Butadiene Styrene (ABS) Plastic |
| Item Weight | 109 Grams |
| Item Length | 13 Inches |
| UPC | 766214010524 |
| Unit Count | 1.0 Count |
| Manufacturer Part Number | TRIPOD-02 |
| Compatible Devices | Compatible with most devices with 1/4 screw hole, Logitech Brio, Logitech Stream Webcam C925e C922x C922 C930e C930 C920 C615, /Camera/iPhone/Ring Light/Projector, NexiGo N60 N660 N930AF N930W N930E N930P N950P N960E N690 N620E N940P N940E /Camera/iPhone/Ring Light/Projector/Camcorder/GoPro;, Webcams |
| Material Type | Rubber Acrylonitrile Butadiene Styrene (ABS) Plastic |
| Audio Recording | No |
| Water Resistance Level | Not Water Resistant |
| Media Type | ProductImage, EnhancedContent |
| Viewfinder Type | LCD screen |
| Maximum Height | 13 Inches |
| Minimum Height | 3 Inches |
| Leg Diameter | 0.75 inches |
| Folded Size | 6.4 inches |
| Features | Foldable, Lightweight |
| Weight Limit | 0.24 Pounds |
| Head Type | Ball Heads |
Recommended next
CAMBOFOTO 73" Camera Tripod and Monopod, Professional Aluminum Tripod Stand for Mirrorless Camera/DSLR/Cell Phone/Camcorder/GoPro, with Phone Holder and Travel Bag (Black)
The CAMBOFOTO 73" tripod + detachable monopod is a lightweight, travel-friendly option for DSLR, mirrorless, and 1/4"-mount devices when you want both a full-height tripod and the flexibility of a monopod. It offers a quick-release plate, bubble level, and a 1/4" mounting system, with an 11 lb maximum load rating, but the design includes some setup care (locking knobs and using the center column correctly) and is not aimed at heavy telephoto shooting.
JOILCAN Camera Tripod, 68" Tablet Tripod Stand for Phone Cameras
The JOILCAN M30-Tablet is a lightweight 68-inch tripod designed to cover multiple roles, phone, tablet, and camera support, plus a wireless remote for touch-free shots. It is a practical pick for beginners and travelers who want adjustable angles and quick setup, with the main tradeoff being weight limit and some parts that may feel more “light-duty” than all-metal rigs.
JOILCAN Tripod Camera Tripods, 74" Tripod for Camera Cell Phone Video Photography
The JOILCAN 74-inch tripod is a lightweight, travel-friendly option built for both cameras and phones. It offers a 3-way pan head for smooth panning and tilting, height adjustment from 19 to 74 inches, and quick-release mounting for faster setup, with a practical carry bag included. The main caveat is that the head and some fittings are not all-metal, so it is best suited to lighter, everyday kits rather than heavy pro builds.
CAMBOFOTO 74"-Camera-Tripod, Professional Aluminum Heavy Duty Tripod Stand for Mirrorless review
The CAMBOFOTO 74-inch lightweight tripod is built for travel and everyday content creation, with a 20 to 74 inch height range, 3-section legs, and a pan-style head for framing. It can support up to 8.8 lb, includes a phone holder and carrying bag, and is typically praised for value and portability, with stability being best when you add weight to the hook.