MoKo Tablet Back Skin Stick Decal for Microsoft Surface Pro (Dark Gray)
Quick take
The MoKo PU leather back skin decal is a slim, form-fitting protective cover for compatible 13-inch Surface Pro models. Buyers like the factory-like look, grippy feel, and scratch-focused protection for daily wear. The main caveat is that alignment takes patience, and some users recommend being gentle when opening the device to avoid the skin lifting.
Pros and cons
Pros
- Made to match compatible Surface Pro 11/10/9/8 13-inch bodies, leaving space for buttons and key areas.
- Thin PU leather skin (about 0.06 cm) that adds minimal bulk and keeps the tablet portable.
- Designed to resist everyday issues like scratches and help guard against dust and oil.
- Many buyers report a neat, “factory installed” look and easy, bubble-free application when applied slowly.
Cons
- Application can be tricky to align because of the large surface area, so rushing increases the chance of bubbles or misplacement.
What buyers think
Buyer-review evidence is broadly positive on the look, fit, and day-to-day feel. Several buyers describe the skin as fitting perfectly and making the Surface Pro’s back look like it came that way. Installation is also frequently called easy, with success tied to taking time with alignment and smoothing out bubbles. A common theme is that it improves grip in-hand and helps prevent wear, especially along edges where rubbing can happen. At the same time, review evidence is limited, and one recurring caution is that opening the device gently matters for long-term adhesion.
What this skin is for
This is a back-shell protection skin for a Surface Pro tablet, not a full case. If you want a low-profile layer that helps reduce visible wear from everyday bumps, handling, and contact with surfaces, a skin like this is a practical step. It also targets the “feel” problem, since the PU leather surface can make the tablet easier to hold compared with bare hard plastic.
Fit and compatibility you should verify
It is designed specifically for Microsoft Surface Pro 11, Surface Pro 10, Surface Pro 9, and Surface Pro 8 13-inch touchscreen models. If your Surface Pro is a different size (or a different model generation outside that list), you should not assume it will line up correctly. The skin is intended to avoid covering key areas like the logo, camera, and buttons.
Protection and everyday durability
The skin is made from PU leather and is positioned as being resistant to scratches and everyday grime. It’s also described as water-resistant, dustproof, and oil-resistant, with an easy-to-clean PU surface. In real-world terms, buyers mention the goal is preventing scuffs and keeping the back shell finish from rubbing off over time, including along areas that see contact during normal use.
How it feels and how to install it
Many buyers report a noticeable change in hand feel, describing a grippy, comfortable surface. For installation, reviews emphasize alignment and patience. Because the skin has to cover a large, curved back area, expect to take your time. When users move slowly and smooth out bubbles as they go, the result is often described as neat and accurate, with a “factory” appearance.
Practical tip: Plan to align before committing fully, and work the skin gradually to reduce bubble risk. If you need to reposition, review evidence suggests careful lifting and reapplying can be possible, but it’s still best to aim for a correct first pass.
Pros and cons in plain terms
Best for
- Surface Pro owners who want protection without adding a bulky case.
- Buyers who care about grip and prefer a leather-like texture.
- People who are willing to apply slowly for clean alignment and bubble-free results.
Who should avoid it
- Shoppers with the wrong Surface Pro size or model, since fit accuracy matters for edge coverage and cutouts.
- Anyone looking for a “set it and forget it” install in a minute, because careful alignment is a recurring theme.
- Users who open and handle the device very roughly, since at least one review notes gentler opening helps prevent peeling.
Is it worth it?
If you have a compatible 13-inch Surface Pro and you want a thin, adhesive skin that upgrades the look and hand feel while protecting against daily wear, the MoKo back skin is a reasonable buy. It is not trying to replace a rugged case, so if your priority is maximum drop protection, you may want a different accessory type. For shoppers who mainly want scratch and grime resistance plus a cleaner, grippier daily experience, buyer feedback supports that this skin delivers.
Alternatives to consider
- Full protective cases: Better if you want edge and corner drop protection, but expect more bulk than a skin.
- Other Surface Pro skins: Look for the same compatibility specificity (13-inch, correct generation), similar thickness, and easy-to-clean materials if that’s important to you.
- Screen protectors or covers alone: If your main concern is display scratches, you might prioritize screen protection before a back skin.
Price and availability
Pricing and stock can change. Check the latest listing details before purchasing to confirm the exact model compatibility and current cost.
FAQ
Will this skin cover the camera or buttons?
It’s cut to fit the Surface Pro body while avoiding key areas like the logo, camera, and buttons, so it should not block those components.
How thick is the MoKo back skin?
It’s very thin, listed at about 0.06 cm, which is intended to add minimal bulk while still providing protection.
Is it easy to install without bubbles?
Many buyers report easy installation, but reviews also suggest taking your time with alignment and smoothing out bubbles slowly as you apply it.
Can the skin be removed without residue?
The skin is described as removable without leaving residue. If you plan to remove and reapply later, take extra care during installation to reduce repositioning needs.
Does it hold up to daily handling?
It’s designed to resist scratches and everyday grime (water-resistant, dustproof, and oil-resistant). Some review evidence also suggests being gentle when opening the device helps maintain adhesion.
Is this compatible with all Surface Pro models?
No. It’s designed for Microsoft Surface Pro 11/10/9/8 13-inch models. Double-check your exact model and screen size before buying.
Specifications
| Product Title | MoKo Tablet Back Skin Stick Decal for Microsoft Surface Pro 11 /Surface Pro 10 / Pro 9 / Pro 8 13-Inch Tablet, PU Leather Protective Decal Body Skin Cover for Surface Pro 11/10, Dark Gray |
|---|---|
| Category | Electronics > eBook Readers & Accessories > Skins |
| Brand | MoKo |
| Manufacturer | MoKo |
| Model Number | DI-EU-MK-ASP220006 |
| Color | Dark Gray |
| Item Weight | 1.34 Ounces |
| Compatible Devices | Microsoft Surface Pro 11, Surface Pro 10, Surface Pro 9, Surface Pro 8 |
| Form Factor | Cover |
| Compatible Device Size Maximum | 13 Inches |
| Additional Features | Oil Resistant, Scratch Resistant |
| Compatible Phone Models | Microsoft Surface Pro 11, Surface Pro 10, Surface Pro 9, Surface Pro 8 |
| Water Resistance Level | Water Resistant |
| Compatible Tablet Computer Models | Microsoft Surface Pro 8, Microsoft Surface Pro 9 |
| Pattern | Solid |
| Shell Type | Soft |
| Enclosure Material | Faux Leather |
| UPC | 840034691535 |
| Unit Count | 1.0 Count |
| Mfr Part Number | DI-EU-MK-ASP220006 |
| Age Range Description | Adult |
| Item Dimensions | 9.06 x 0.04 x 11.06 inches |
Available variants
Color
- Black
- Dark Gray
- Platinum
Size
- 13" Surface pro 11/10/9/8/X
- 12.3" Surface Pro 7+/7/6/5/4/LTE
- 12" Surface Pro 12
Recommended next
KACIOLA STUDIO 24PCS Warm Color Skin for E-Reader, and 4PCS Type C Charms for E-Reader with Scrapbook Stickers, 7"x5" Skin Front and Back Decal Inserts for Paper White 12th (Warm Color)
The KACIOLA STUDIO 24PCS Warm Color skin set is a fun way to refresh a 7-inch Kindle Paperwhite 12th Gen (warm theme designs, front and back pieces, plus extra stickers and charms). It’s designed to fit behind a clear case or be peeled and applied, with a coated surface meant to hold up through daily handling. Main caveat: it is a decal skin, not a protective case, and some buyers note fit or application can affect how flawless the front piece looks over time.
KACIOLA STUDIO 24PCS Vintage Floral Skin for E-Reader, and 4PCS Type C Charms for E-Reader with Scrapbook Stickers, 7"x5" Skin Front and Back Decal Inserts for Paper White 12th (Vintage Floral)
This KACIOLA STUDIO skin set is built for Kindle Paperwhite 12th Gen users who want a quick, customizable front and back look without fully swapping cases. Expect lots of vintage floral options, a glossy/holographic-style finish, and extra scrapbook stickers plus USB-C port charm covers, but also note that fit can vary and you should treat it as a decorative decal, not drop protection.
Tacky Design Chessboard Skin for Kindle Colorsoft Skin 2024, Minimalist review
A checkered vinyl skin made for Kindle Colorsoft (12th gen, 2024) that covers the full exterior while keeping buttons and ports accessible. It aims for easy, bubble-free installation with repositioning, but careful alignment around corners is important, and the durability is mainly about scratch and light resistance, not making the device water-resistant.
Tacky Design Chessboard Skin for Kindle Colorsoft Skin 2024, Minimalist checkered vinyl wrap (Light Pink & Baby Pink)
A custom-fit vinyl skin designed specifically for the Kindle Colorsoft 2024 (12th gen). It’s made with 3M vinyl for scratch protection and a bubble-free, repositionable install, plus glossy checkered artwork in Light Pink and Baby Pink. Main tradeoff: corner alignment and application can be tricky for some buyers.