Lykus Titan MA320 Waterproof Hard Case for DJI Air 3S/Air 3 (Case Only)

What buyers think

Buyer-review evidence is strongly centered on fit and build quality. Multiple reviews describe the case as sturdy, with rigid protective plastic and latches that keep the lid secure. The foam cutouts are repeatedly described as precise, with accessories sliding in easily and matching the expected layout. Several comments also highlight practical details like a pressure relief valve, finger-access cutouts for removing items, and extra internal room beyond the core drone bundle. The main recurring caveat is controller placement, where the RC2 can sit a bit deeper in the foam and may allow slight movement when the case is closed, depending on how the controller is protected. Overall, buyer sentiment is positive on protection-first design and organization, with the main limitations tied to how much you try to pack into the interior and how your controller setup interfaces with the foam.

What’s included (and what’s not)

This is a case-only purchase, so you are buying the protective shell and internal foam layout, not the drone or batteries themselves. The design is intended to hold the DJI Air 3S/Air 3 along with DJI RC2/RC-N3, plus typical accessories such as charging and storage components and additional add-ons. If you are using specialized accessories (extra landing gear, payload mechanisms, or bulky remote protection), plan to check clearance against the foam arrangement.

Design and protection: how the MA320 is built for travel

Elastic CNC-cut foam for secure storage

The interior protection is based on CNC precision-cut foam made from a special elastic EVA material. Compared with more rigid foam, this approach is intended to improve absorption of pressure and shock. In practice, buyers often mention that items sit in the cutouts without needing re-cutting, and that the arrangement helps keep components from rattling during transport.

Rigid shell and sealing for wet-weather risk

The outer shell is made from polypropylene (PP) and is designed to provide strong resistance against shock and pressure. For water exposure, the case is rated IP67 waterproof, with certification noted for protection even if the case drops into water. A gasket around the lid and a pressure relief valve are part of the intended system for keeping the case closed securely while accounting for pressure changes.

Internal capacity and storage layout

Storage is built around a “large flexible space” concept. The case is specified to fit DJI Air 3S/Air 3 and DJI RC2/RC-N3, and it supports up to 7 batteries. The footprint and interior layout also aim to accommodate commonly carried items like cables, filters, and props, plus other accessories depending on how you pack them.

Fit details to consider before you buy

• RC2 controller positioning: Reviews suggest the RC2 may sit deeper in the foam, which can lead to slight side-to-side movement when the case is closed. Using a thinner protective cover, or adjusting how the remote is stored, may help keep everything snug.
• Remote add-ons and bulky protection : If you run a sun shield visor or a thicker silicone remote case, expect some layouts to feel tighter.
• Extra gear beyond the bundle: The case offers extra space, but there is still a ceiling. If you carry larger third-party add-ons (landing gear, payload hardware, or multiple compartments of spares), consider whether they match the case’s intended cavity layout.

Pros and cons in real-world buying terms

Pros

• If you want a hard case that is purpose-built around the DJI Air 3S/Air 3 + RC2/RC-N3 setup, the foam layout and accessory fit are commonly described as “just right.”
• The combination of a rigid polypropylene shell, elastic EVA foam, and IP67 waterproof rating makes it a strong option for travel where drops, rain, or wet conditions are a concern.
• With capacity for up to 7 batteries, it supports longer sessions without needing to consolidate elsewhere.
• Practical details like latches designed to resist accidental opening and a pressure relief valve add everyday usability.

Cons

• If your remote is protected with bulky accessories, or if you prefer a totally immobile, zero-movement pack, you may need to tune your packing approach to reduce any minor shifting in the controller area.
• Although there is extra room, very custom accessory setups may require compromise compared with cases that target “bigger” accessory inventories.

Who should buy the Lykus Titan MA320

• DJI Air 3S/Air 3 owners who want a hard-shell case with molded foam storage and straightforward organization.
• Travel-focused pilots who need waterproof protection in the IP67 class for rain, water exposure, and rough handling.
• Multi-battery users who want room for up to 7 batteries plus the usual charging and accessory items.
• Buyers who value fit and protection over modular storage, meaning you prefer a custom cavity layout rather than a flexible insert system.

Who should consider a different option

• Those carrying very bulky or unusual accessories beyond the expected kit, because the foam layout has limits and may feel tight depending on what you add.
• People who need the remote to be perfectly fixed with no possibility of foam-related movement, since the controller cavity can be snug but not always “locked” depending on your remote protection.
• Anyone who is not using the DJI Air 3S/Air 3 + RC2/RC-N3 ecosystem, since the case is tailored for that specific gear set.

Bottom line: is it worth it?

The Lykus Titan MA320 is a solid choice if you want an IP67 waterproof hard case that is designed around the DJI Air 3S/Air 3 and DJI RC2/RC-N3 setup. Buyers consistently respond positively to its sturdiness and the way foam cutouts help accessories fit neatly without reworking. The value is strongest when your accessories match the intended layout, and the main thing to watch is how your controller and any remote add-ons sit in the foam cavity.

Buy on Amazon

Recommended next

Camcorder Cases $34.99

★★★★★ 4.7/5 4,250 ratings

Sony LCSU21 Soft Carrying Case for Cyber-Shot and Alpha NEX Cameras (Black)

The Sony LCSU21 is a compact, soft-sided camera case designed for popular Sony compact interchangeable-lens bodies and Handycam/Cyber-shot models. It emphasizes quick access and tidy organization with a moveable divider and multiple padded/mesh storage areas, but the small footprint means it is best for one camera plus one lens (or a carefully sized kit).

Camcorder Cases $39.99

★★★★★ 4.6/5 464 ratings

Lekufee Waterproof Hard Case for DJI Osmo Pocket 4, DJI Osmo Pocket 3, Mic 3/2/Mini (Case Only)

A purpose-built hard case with double-layer EVA foam and IP67 waterproofing for keeping DJI Osmo Pocket 4 or Osmo Pocket 3 Creator/Power Expansion bundles organized and protected outdoors. Best for hikers, travelers, and anyone carrying camera and accessory kits that need snug, compartmentalized storage.

Camcorder Cases $23.99

★★★★★ 4.6/5 2,899 ratings

Hard Case for GoPro, Surface-Waterproof Carrying Case (Medium)

A compact medium hard shell case for GoPro and similar action cameras, designed to keep the camera and a couple essentials organized. It uses EVA foam inserts, a waterproof zipper, and elastic mesh storage, but the “medium” footprint means it may not fit larger accessories or bulkier setups.

Camcorder Cases $170

★★★★★ 4.7/5 272 ratings

Lykus HC-5120 Waterproof Hard Case with Wheels and Customizable Foam

The Lykus HC-5120 is a rugged, wheel-and-retractable-handle hard case built for protecting cameras, lenses, drones, and tools. It includes configurable foam and an IP67-rated shell for dust and water resistance, with interior dimensions sized for a variety of compact electronics and gear. The main tradeoff is weight and bulk, which makes it ideal for rolling and staging gear, not for everyday carry.