Long Range VHF Marine Radio Antenna 156-163MHz Antenna PL259 Connector with 16.5 Feet Low Loss Coaxial Cable (eifagur)
Quick take
This eifagur VHF marine antenna kit is designed for 156-163 MHz radios and pairs a spring-style antenna with a PL-259 connector and 16.5 ft low-loss RG-58 coax cable. Buyers tend to focus on easy installation and improved ability to receive marine VHF transmissions. The key caveat is band match, it only makes sense if your VHF radio is meant for the 156-163 MHz range.
Pros and cons
Pros
- Built for 156-163 MHz marine VHF: frequency range is explicitly matched to typical VHF marine use.
- Complete connection package: includes a stainless steel mounting bracket plus a 16.5 ft (5 m) low-loss RG-58 coax lead with PL-259 connector.
- Marine-ready corrosion resistance: stainless steel bracket is intended for outdoor, weather-exposed mounting.
- Solid electrical specs for the use case: 50 ohm impedance and VSWR listed as less than 1.8, with 50W maximum power input.
Cons
- Only for radios that match the 156-163 MHz band: if your radio is outside this range, it will not be the right antenna.
- Gain is modest and realistic for VHF: it’s listed at 2.5 dBi, so expectations should stay aligned with typical VHF improvements rather than “boosting” distant coverage dramatically.
What buyers think
Buyer-review evidence is limited in quantity, but the recurring themes that do show up are positive and practical. The installs are described as straightforward, with multiple buyers highlighting easy mounting on boat or yacht locations. Several buyers also report that reception is noticeably workable for their needs (for example, being able to hear transmissions from farther away). A smaller number of reviews are very brief, so the overall pattern suggests “easy to fit, helps reception,” rather than detailed technical commentary. There is not enough consistent review detail to reliably assess build longevity under harsh conditions or compare performance against more premium antenna designs.
Design and compatibility: what this antenna is built to do
This is a VHF marine antenna intended for equipment operating in the 156-163 MHz band. It’s specified as a 50 ohm antenna with vertical polarization and a listed VSWR of less than 1.8, which is generally what you want for efficient matching when you’re staying within the antenna’s designed band. It also carries a 2.5 dBi gain figure and a maximum power input of 50W.
For buyers, the most important compatibility check is the radio itself. If your marine VHF radio is designed to operate within 156-163 MHz, this antenna kit aligns with that requirement. If you’re shopping for a different band (for example, a different VHF segment or a separate radio system), you’ll need a different antenna rather than relying on this one.
Installation experience: the included cable and mount matter
The kit is built around a straightforward install approach, with a stainless steel spring antenna and a bracket intended for mast-top or similar mounting points. It also includes 16.5 feet (5 m) of low-loss RG-58 coaxial cable with a PL-259 connector, so you are not starting from scratch if your radio setup already uses a PL-259 style connection.
From a buyer perspective, the common “fit and use” advantage is that the package is cohesive. When the cable length works for your boat layout and the connector style matches your radio, you can focus on mounting and routing the coax rather than sourcing extra parts.
Performance expectations for marine VHF
Marine VHF communication is highly dependent on antenna placement, line of sight, and how clean the electrical match is. This antenna’s specifications (156-163 MHz tuning, 50 ohm impedance, VSWR under 1.8) suggest it is intended to be a proper-match antenna for the band. Buyers who mention results tend to describe better practical reception for their use case rather than extreme range claims.
If you are currently using a poorly matched antenna, a short or damaged coax run, or an antenna that is not designed for the VHF marine band, swapping to a purpose-built unit like this can help. If you are already operating with a correctly tuned marine antenna mounted in a high, clear location, the improvement may be more incremental.
Pros and cons, summarized
- Good fit for: owners of 156-163 MHz marine VHF radios who want a complete antenna and cable package for mast-top installation.
- Less ideal for: anyone whose radio operates outside the 156-163 MHz band, or buyers who need a specific connector type that is not PL-259-compatible.
- Primary strengths: band-appropriate design, included low-loss coax with PL-259 connector, and corrosion-resistant stainless mounting hardware.
- Main caveat: the antenna’s usefulness depends on your radio being in the correct VHF marine frequency range.
How it compares in this category (without named rivals)
When shopping for marine VHF antennas, buyers usually weigh these factors: frequency range match, connector compatibility, cable included (or not), build for weather exposure, and whether the antenna includes basic electrical characteristics that suit efficient matching.
This antenna stands out for bundling cable and a familiar connection (PL-259) with a mounting hardware set intended for outdoor use. If you find a lower-cost option that sells the antenna only, you may need to add compatible coax and connectors. If you find a higher-cost “upgrade” antenna, the decision typically becomes whether you actually need a different gain profile or different build approach for your specific mounting constraints and radio configuration.
Price and availability
Pricing can vary by retailer and can change over time. To check the most current cost and shipping details for your area, use the button below.
Verdict
The eifagur Long Range VHF Marine Radio Antenna is a practical choice for buyers who need a 156-163 MHz marine VHF antenna kit with an included 16.5 ft low-loss RG-58 coax cable and PL-259 connector. If your radio is band-matched and you can mount the antenna in an accessible, higher position, it’s the kind of straightforward upgrade that shoppers describe as easy to install and helpful for receiving marine transmissions.
FAQ
What VHF radios is this antenna compatible with?
It is designed for devices that operate in the 156-163 MHz range. If your radio is outside that band, you’ll want a different antenna designed for your frequency range.
Does it include cable and the PL-259 connector?
Yes. The kit includes 16.5 feet (5 m) of low-loss RG-58 coax and a PL-259 connector, intended to make installation easier if your radio setup uses PL-259.
How much power can the antenna handle?
It’s listed with a maximum power input of 50W. Staying within your radio’s output limits and proper matching is important.
Is it weather resistant for marine use?
The mounting bracket is stainless steel and is described as resistant to corrosion and suitable for outdoor use, including marine environments.
Will this increase range a lot?
It provides a listed 2.5 dBi gain and is specified for the marine VHF band, which can help in the real world. However, VHF performance still depends heavily on antenna placement and line of sight, so results are usually best when the antenna is mounted higher and with a clean route for the coax.
Specifications
| Product Title | Long Range VHF Marine Radio Antenna 156-163MHz Antenna PL259 Connector with 16.5 Feet Low Loss Coaxial Cable for Midland Uniden Cobra Icom Yaesu Vertex Standard Marine Radio, Eifagur |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Marine Electronics > Marine Antennas |
| Brand | eifagur |
| Manufacturer | eifagur |
| Color | Spring Antenna |
| AntennaDescription | Radio |
| Number of Items | 1 |
| Warranty Description | 2 |
| Unit Count | 1.0 Count |
| Number of Channels | 1 |
| Impedance | 50 Ohms |
| Antenna | Radio |
| Number of Packs | 1 |
Available variants
Style
- Spring Antenna
- Rubber Antenna
- Magnetic Base Antenna
Recommended next
Tram® Pretuned VHF 3-dBd-Gain Marine Rachet-Mount 46-in. Fiberglass Antenna with RG58 Cable and FME-Female Connector with PL-259 Adapter
The Tram 46-inch pretuned VHF marine antenna is designed for dependable, across-the-marine-band coverage, with a 3 dBd gain fiberglass element and a nylon ratchet mount that can lower for storage or low-bridge situations. It’s a practical choice for buyers who want an easier install with included stainless hardware, a 20 ft RG58 run, and connectors that aim to simplify small-hole routing.
Tram 1600-HC Pretuned 35-Inch VHF Fiberglass Antenna with RG58 Cable and PL-259 Connectors
The Tram 1600-HC is a pretuned, fiberglass marine VHF antenna built around a low-profile, bottom-loaded coil and a 35-inch stainless steel whip. It’s designed for marine-band listening and communication across VHF frequencies, and it ships with RG58 coax plus PL-259 connectors to simplify installation for many boat setups.
Shakespeare 4' Centennial VHF Antenna, White
The Shakespeare 4' Centennial VHF Antenna (model 5104) is a compact, 50-ohm marine VHF antenna designed for boats that need a shorter mast height for bridge clearance. Buyers generally report solid reception for near-range use and a generally straightforward install, with the main caveat being that the connector work can be a bit fiddly depending on how you prefer to terminate coax.
Shakespeare 5206-N 8' VHF Antenna
The Shakespeare 5206-N 8' VHF antenna is designed for marine VHF radio setups where reliable range and straightforward installation matter. Buyers frequently describe solid performance after install, confident radio checks at distance, and a build quality that holds up over years.