Leenconghui 80" Tripod & Selfie Stick for DJI Osmo Pocket 3/4, Expandable
Quick take
This 2-in-1 selfie stick and tripod is built specifically around DJI Osmo Pocket 3 and 4, combining extended handle shooting with a stand-up tripod mode. It reaches up to about 205 cm (80"), which is great for wider landscapes, group framing, and higher angles, but you should avoid expecting the same stability on very uneven ground.
For travel and everyday creator setups, the compact folded length and lightweight build are the main convenience wins, while the big consideration is whether you realistically need the full height.
Pros and cons
Pros
- Tall reach: telescopes from roughly 36.5 cm to 205 cm (8 adjustable sections).
- 2-in-1 design: switches between selfie stick use and a floor-standing tripod.
- Osmo Pocket 3/4 focused fit: expansion adapter aims to keep key controls usable without blocking charging or the quick release.
- Travel-friendly: folds to about 14.37" and weighs about 0.63 kg.
Cons
- Full height can be situational: buyers note it is best on calmer days, with stability expectations changing when extended.
- Not ideal for rough surfaces: the tripod mode may be less reliable on very rocky or uneven ground.
- No water resistance: it is not water resistant, so plan on protecting it in wet conditions.
What buyers think
Buyer-review evidence highlights a consistent theme: this stand is valued for its solidity and usability with Osmo Pocket 3. Several mentions focus on it feeling “sturdy” or “heavy duty” while still being manageable, and a few buyers specifically call out that it stays stable in-hand and can be steady even when extended, as long as conditions are reasonable.
Reviews also emphasize practicality. Buyers describe it as functional for workflow and content creation, and they often highlight the ease of extending, the confidence from the clamp action, and the satisfaction with the overall build quality. There is also limited but relevant caution around using it outdoors in wind and avoiding very uneven ground surfaces.
Who this is best for
- Osmo Pocket 3/4 owners who want one accessory for multiple shots: you can go from held framing to a standing tripod quickly.
- Creators who benefit from higher viewpoints: the long extension range helps with group photos, wider landscapes, and overhead-ish compositions.
- Travel shooters and hikers who need packable gear: the folded length is designed to be easy to carry, compared with longer, bulkier tripod setups.
Key features that matter in real use
80-inch max height, with multiple steps
The telescoping design provides eight adjustable sections, letting you dial the setup height from about 14.37" folded position range up to roughly 205 cm. That flexibility matters when you want to match your environment, whether you are shooting indoors, staging a group, or trying for higher landscape framing.
Selfie stick to tripod, plus a wider base mode
The unit is designed to open into a tripod configuration, with an adjustable width that can reach about 40 cm across at the maximum open edge. This is intended to give you a more stable stand when you want the Pocket to hold position without you holding the stick.
Dedicated fit for osmo pocket 3/4
It includes an expansion adapter built for DJI Osmo Pocket 3 and 4, with the goal of preserving access to camera controls and joystick functionality. The adapter is also intended to avoid interfering with the bottom quick release and charging operations, which is important for avoiding awkward setup limitations.
Materials and portability
Made with aluminum, the setup targets a balance of sturdiness and carryability. At about 0.63 kg and with a folded length around 14.37", it is positioned as a travel companion rather than a bulky studio tripod.
Pros and cons in plain terms
When it makes sense
- If you want a single accessory that covers both held shots and tripod framing.
- If you regularly shoot group photos, wider scenes, or higher angles where a tall reach helps.
- If you prefer a compact travel format over a full-size tripod kit.
When to think twice
- If your main use is very uneven or rocky ground, where tripod stability can suffer.
- If you usually film in windy outdoor conditions at full extension, where the best stability may come from using less than the maximum height.
- If you need gear that’s truly usable in wet environments, since it is not water resistant.
Comparison approach (how to choose the right tripod option)
Since no direct competitors were provided, use these criteria to compare alternatives in the complete tripod category:
- Compatibility: look for a dedicated Osmo Pocket 3/4 mount or expansion adapter.
- Reach vs. practicality: decide if you genuinely need up to 80", or if a shorter travel tripod would do most of your work.
- Portability: compare folded length and weight for how often you carry it.
- Stability at extension: taller designs often trade off stability in wind or uneven ground, so prioritize reviews mentioning clamp quality and real-world steadiness.
- Port mode: a real 2-in-1 selfie stick and stand can reduce gear clutter if it switches quickly.
Verdict
The Leenconghui 80" tripod and selfie stick is a strong fit for Osmo Pocket 3 and 4 owners who want tall reach in a compact package, plus a tripod mode for hands-free framing. It’s best when you can use it on reasonably stable ground and when you tailor extension length to conditions. If you mostly shoot in controlled settings or want more variety in angles, it looks like a practical, no-nonsense upgrade for content creation.
FAQs
Is this tripod compatible with DJI Osmo Pocket 3 and Osmo Pocket 4?
Yes. It is designed for DJI Osmo Pocket 3 and DJI Osmo Pocket 4, using a dedicated expansion adapter intended to keep camera controls and joystick access usable.
How tall does it extend?
It telescopes from about 36.5 cm (14.37") up to about 205 cm (80.71") using multiple adjustable sections.
Can it be used as both a selfie stick and a tripod?
Yes. It supports selfie stick use and can open into a floor-standing tripod configuration with an adjustable base width.
Is it stable when extended to full height?
Stability appears to be best in calmer conditions and on stable surfaces. Buyers mention good sturdiness, but also note that extended use may be less ideal in wind or on uneven ground.
Is this device water resistant?
No. It is not water resistant, so you should protect it from rain, splashes, and heavy moisture.
Specifications
| Product Title | 80" Tripod & Selfie Stick for DJI Osmo Pocket 3/4，Expandable Selfie Stick Tripod Accessory for DJI Osmo Pocket3 4 |
|---|---|
| Category | Electronics > Camera & Photo > Tripods & Monopods > Complete Tripods |
| Brand | Leenconghui |
| Manufacturer | Shenzhen Chonghui Technology Co., Ltd |
| Model Name | OP-22 |
| Model Number | OP-22 |
| Color | Black |
| Material | Aluminum |
| Item Weight | 0.63 Kilograms |
| Item Length | 205 Centimeters |
| UPC | 785179862023 |
| Unit Count | 1.0 Count |
| Manufacturer Part Number | OP-22 |
| Warranty Description | 1 |
| Built-In Media | OP-22 |
| Maximum Height | 205 Centimeters |
| Minimum Height | 36 Centimeters |
| Folded Size | 14.37" |
| Compatible Devices | Dji Osmo Pocket 3, Dji Osmo Pocket 4, Insta 360one X5 X4 X3 X2 |
| Features | tripod-camera-mounts |
| Head Type | Pan Heads |
| Number of leg sections | 3 |
| Material Type | Aluminum |
| Audio Recording | No |
| Water Resistance Level | Not Water Resistant |
| Media Type | EnhancedContent |
| Special Feature | tripod-camera-mounts |
Recommended next
Manfrotto MTPIXIMII-B, PIXI Mini Tripod with Handgrip for Compact System Cameras
The Manfrotto PIXI MTPIXIMII-B is an ultra-compact mini tripod with a ball head that works as both a tabletop stand and a handheld grip. It uses a standard 1/4-inch thread, focuses on lightweight portability, and is a practical pick for compact system cameras, DSLRs, and phones (with the right adapter). The main tradeoff is its very short height, so it is best for low, tabletop, desk, or travel setups rather than full-height shooting.
Victiv Tripod 74-Camera-Tripod for Cell Phone, Aluminum Professional Heavy Duty
The Victiv NT70 is a tall aluminum tripod designed for both cameras and phones, featuring a 3-way pan head and a quick-release plate setup. At its weight and price point, buyers commonly call it a solid, easy-to-assemble option for video, streaming, and steadier shots, with one notable caveat for phone users: the included phone holder may not fit smaller or certain case sizes without an extra adjustment.
VICTIV 74” Camera Tripod, Tripod for Camera and Phone, Aluminum Professional Tripod Stand for Canon Nikon with Carry Bag and Phone Holder
The VICTIV 74” camera tripod is a lightweight aluminum tripod with a 3-way pan head for horizontal, vertical, and portrait-style framing. It includes a phone holder, quick-release plate, and carry bag, making it a practical pick for casual DSLR use, smartphone filming, and general creative shooting, with one notable phone-holder limitation for certain phone sizes.
ULANZI Camera Tripod, Mini Flexible Stand w Hidden Phone Holder w Cold Shoe Mount, 1/4'' Screw f Magic Arm
The ULANZI MT-11 is a compact octopus-style flexible tripod designed for both phones and cameras. It combines a hidden phone mount with a cold shoe for adding a mic or LED, plus a 1/4-inch screw for wider accessory compatibility. It is a strong value pick for casual vlogging, travel, and tabletop shots, with the main tradeoff being that you should avoid forcing the flexible legs into extreme angles.