Leather Phone Wallet, Stick On Card Holder for Back of Phone Case - Compatible with Most Cell Phones (iPhone, Samsung) - 2Pack Black
Quick take
This slim stick-on leather phone wallet adds a two-slot pocket to the back of many iPhones and Samsung Galaxy phones, plus compatible phone cases. It focuses on quick errands, holding a few cards and some cash with a strong adhesive backing, but it is best for people who want minimal bulk and do not mind that card removal can feel tight.
Pros and cons
Pros
- Soft, durable PU leather look and feel, with a slim “compact” profile.
- Two-pocket design for separating items (for example, ID vs. card) without a bulky wallet.
- Strong adhesive backing intended for long-lasting attachment on smooth surfaces.
- Helpful for “leave your wallet at home” routines and quick errands.
Cons
- Card access may be snug, sometimes requiring extra care when removing cards.
- Fit can vary depending on case shape, especially if the wallet does not land perfectly flat.
- Not compatible with smaller iPhone models listed as excluded, so you must check size/fit first.
What buyers think
Buyer-review evidence is generally supportive of the product’s everyday practicality. Shoppers repeatedly mention that the holder is stylish and sturdy, with a comfortable, soft leather-like exterior. Many highlight that the adhesive sticks securely during daily use and that the pocket keeps cards from feeling overly loose. Several reviews also note the two-slot setup is convenient, and that the holder stays relatively flat and compact. Where feedback gets mixed, it is usually about usability details, such as how hard it can be to pull cards out without taking care, or how closely it matches the contour of certain phone cases.
Design and capacity: what you can store
This is a slim back-of-phone wallet designed to hold a small number of essentials, not to replace a full wallet. It has a two-slot/card-holder layout (number of compartments is listed as 2, with slip-pocket style construction). That makes it a good fit for an ID and one primary card, or two cards you commonly use, plus a small amount of cash if you like to keep change and bills handy.
Adhesive attachment: how secure is it?
The wallet uses a high-quality 3M-style adhesive tape backing for attachment. In practical terms, it is meant to provide a firm, long-lasting hold without losing strength due to everyday pocket heat, light moisture, or sweat. Application is straightforward, peel and stick to the back of your phone or a compatible case, then press gently to set it.
Important buyer-fit note: it works best on smooth surfaces. If your phone case has texture, deep ridges, or uneven contours, the wallet may not sit perfectly flat, which can affect card comfort and day-to-day ease of use.
Compatibility: which phones and cases work best
The holder is described as universal for phones sized 4 inches or above, with a width requirement of greater than 65 mm. It is positioned as compatible with iPhone and Samsung Galaxy models and many other smartphones that meet the size criteria. It also lists that it is not compatible with specific smaller iPhone models (including iPhone SE and iPhone 5s/5 and below), so it is worth double-checking your model before purchase.
For cases, it is designed to stick to smooth case surfaces from brands like OtterBox and LifeProof, plus other brands, as long as the external surface is compatible with adhesive attachment and allows the wallet to lay flat.
Pros and cons in real-world use
When it makes sense
- You want quick-access storage for 2 cards and possibly cash for errands, travel, or days out.
- You prefer a minimalist approach over a traditional bulky wallet.
- Your phone (or case) has a smooth back surface where adhesive can bond well.
When you should consider alternatives
- You want the fastest, easiest card retrieval, since some buyers find card removal tight.
- Your phone case is hard to stick to evenly (for example, it does not provide a flat bonding area).
- Your phone model falls into the explicitly excluded smaller iPhone list.
Verdict: is this leather phone wallet worth it?
This stick-on leather phone wallet is a solid choice if you want a slim, stylish way to carry a small set of essentials without a separate wallet. The combination of a two-pocket layout and strong adhesive is appealing for everyday convenience. The main reason to pause is usability and fit: card access can feel snug, and not all phone cases will create the ideal flat placement. If you match the size requirements and apply it to a smooth surface, it is a practical “back pocket” upgrade for the right phone and case.
Price and availability
It is currently sold as a 2-pack in black and is listed at a budget-friendly price point for adhesive phone accessories. Availability and the latest price can change, so check the current listing before you buy.
FAQ
Is this compatible with iPhone and Samsung phones?
It is designed for most smartphones with screen sizes 4 inches or above and a width greater than 65 mm. It is also not compatible with certain smaller iPhone models (including iPhone SE and iPhone 5s/5 and below), so confirm your model before ordering.
Will it work on phone cases?
Yes, it is intended to stick to smooth phone-case surfaces. If your case is uneven or heavily textured, it may not lay flat, which can affect how comfortably cards sit and how easily you access them.
How many cards does it hold?
It has a two-slot card holder design, intended for carrying a few essentials like ID and one card (and you may be able to add a small amount of cash depending on thickness).
Is the adhesive strong and removable?
The holder uses a 3M-style adhesive backing meant for a firm, long-lasting hold on smooth surfaces. The product also indicates that removing it should not leave sticky residue if you choose to remove it, but bonding strength and removability can vary based on your specific phone case material and surface.
Why might cards be hard to remove?
Because it is built to keep a tight fit and a snug pocket, some users find the cards feel secure but can be difficult to pull out at first. Gentle technique helps, especially during the early days of use.
FAQs
- Is this compatible with iPhone and Samsung phones?It is designed for most smartphones with screen sizes 4 inches or above and a width greater than 65 mm. It is also not compatible with certain smaller iPhone models (including iPhone SE and iPhone 5s/5 and below), so confirm your model before ordering.
- Will it work on phone cases?Yes, it is intended to stick to smooth phone-case surfaces. If your case is uneven or heavily textured, it may not lay flat, which can affect how comfortably cards sit and how easily you access them.
- How many cards does it hold?It has a two-slot card holder design, intended for carrying a few essentials like ID and one card (and you may be able to add a small amount of cash depending on thickness).
- Is the adhesive strong and removable?The holder uses a 3M-style adhesive backing meant for a firm, long-lasting hold on smooth surfaces. The product also indicates that removing it should not leave sticky residue if you choose to remove it, but bonding strength and removability can vary based on your specific phone case material and surface.
- Why might cards be hard to remove?Because it is built to keep a tight fit and a snug pocket, some users find the cards feel secure but can be difficult to pull out at first. Gentle technique helps, especially during the early days of use.
Specifications
| Product Title | Leather Phone Wallet, Stick On Card Holder for Back of Phone Case - Compatible with Most Cell Phones (iPhone, Samsung) - 2Pack Black |
|---|---|
| Category | Cell Phones & Accessories > Accessories > Adhesive Card Holders |
| Brand | Puxnoin |
| Manufacturer | Puxnoin Direct |
| Color | Black |
| Material | Polyurethane Leather |
| Item Weight | 0.02 Kilograms |
| Additional Features | Card Slot |
| Wallet Compartment Type | Credit Card |
| Closure Type | Adhesive |
| Pocket Description | Slip Pocket |
| Embellishment Feature | Embossed |
| Number of Compartments | 2 |
| Number Of Pockets | 3 |
| Number of Sections | 3 |
| Wallet Card Slot Count | 2 |
| Style Name | Compact |
| Pattern | Solid |
| Form Factor | Slim |
| Theme | Minimalist |
| Brand Name | Puxnoin |
| Included Components | Card Holder |
| Unit Count | 2 Count |
| Age Range Description | Adult |
| Material Type | Polyurethane Leather |
| Lining Description | Faux Leather |
| Product Care Instructions | Dry Cloth Clean |
Available variants
Color
- Blue
- Navy Blue
- Pink
- White
- Black
- Grey
Recommended next
TAURI 3 in 1 Magnetic for iPhone 13 Case, Compatible with MagSafe (Clear, with 2X Screen Protectors)
A slim, clear MagSafe-compatible iPhone 13 case bundle with tempered-glass screen protection. It’s built around strong magnets and drop-focused corners, and buyers like the look and day-to-day grip, with one common caution: the included screen protector can be more finicky to apply and may crack for some users.
Satechi Magnetic Magsafe Wallet, Double Flap Stand Card Holder, 4 Slots with Front NFC Pass-Through
The Satechi Magnetic MagSafe Wallet is a slim, vegan-leather card holder that snaps to your MagSafe iPhone for easy access to up to 4 cards, including a front NFC pass-through for tap-to-pay. It also folds out into an adjustable stand for hands-free video calls, streaming, and desk use, but it is designed for minimalist carry, not cash-heavy wallets.
for MagSafe Wallet, 3 Card Holder, Magnetic Slim Phone Wallet for iPhone 17/16/15/14/13/12 Pro Max Plus Air Series
A slim MagSafe-compatible card holder designed to carry up to three cards while staying pocket-friendly. The standout feature is its strong magnetic attachment for a stable hold, with RFID blocking and a low-profile PU leather build, though card access can require detaching the wallet.
LIFESTYLE DESIGNS The StickyWallet – Premium Spandex Stick-on Phone Wallet Card Holder
The StickyWallet is a slim, spandex stick-on phone wallet with a double-pocket design for cards plus a hidden cash pocket, and a built-in metal plate for magnetic car mounts. It’s designed for smooth, flat-back cases, but it may feel tight at first (and wireless charging requires removing the case).