Laser Level Tripod, 1/4"-20 Thread Mount, 18" Lightweight Aluminum Portable Adjustable Tripod (DegLasers)
Quick take
This DegLasers laser level tripod is a portable aluminum support stand designed for tools that mount on a universal 1/4"-20 screw. With adjustable height from 17 to 52 inches and a 3-way pan-tilt head plus built-in bubble level, it is a practical pick for leveling and positioning laser levels, cameras, and projectors at different angles.
The main limitation is its modest weight limit (6.6 lb), so it is best matched to lighter laser/measurement setups rather than heavier professional instruments.
Pros and cons
Pros
- Universal 1/4"-20 threaded mount for common laser levels, cameras, and projectors
- Adjustable height from 17 to 52 inches (4 extension settings)
- 3-way pan-tilt head for 360-degree horizontal rotation and sideways 90-degree tilt, plus a built-in bubble level
- Lightweight and compact for travel (minimum length 17 inches) and includes a carrying pouch
Cons
- Weight limit is 6.6 lb, so it may not suit heavier measurement gear
- Build feedback is mixed on leg rigidity, with at least some buyers wanting sturdier legs
What buyers think
Buyer-review evidence is largely positive but not detailed enough to identify a strong, repeatable pattern on advanced performance metrics. What does show up consistently is that the tripod is described as useful with laser levels and easy to store, with buyers appreciating the basic function of mounting and positioning their device. There is also limited but relevant feedback suggesting the legs could feel stronger, which points to a possible tradeoff for a lightweight, portable design.
What it is, and who it is for
This is a complete tripod unit made to stabilize and aim laser levels and other 1/4"-20 mounted tools. It is designed around a practical field workflow, where you need to raise your tool, fine-tune direction, and quickly check leveling before you mark or measure.
It is a good fit if you:
- Use a cross-line or similar laser level that supports a 1/4"-20 threaded mount
- Want a portable tripod that packs down to 17 inches with a carrying pouch
- Need adjustable placement between 17 and 52 inches for indoor and outdoor use
- Prefer a head that supports both horizontal rotation (360 degrees) and a sideways 90-degree tilt
Key features that matter in real use
Height range and extension flexibility
The tripod offers four adjustable extension lengths, giving you reach from 17 to 52 inches. That range is helpful when you are working at different mounting heights, whether you are setting up on the floor, using a table, or aiming for a higher reference line.
Head controls and leveling support
The 3-way pan-tilt head is built for positioning. You get a stable 360-degree pan/tilt approach, plus an adjustable 90-degree sideways tilt for angled setups. A built-in bubble level lets you check whether the tripod platform is reasonably level before locking in your measurement.
Universal 1/4"-20 threaded compatibility
The universal 1/4"-20 screw is the main compatibility point. It is intended for tools that have 1/4" threaded holes, including laser levels, rangefinders, cameras, and projectors that match this standard.
Material and stability expectations
The tripod uses aluminum alloy and PP materials, with a triangular design intended to reduce vibration and improve accuracy. It supports up to 6.6 lb, which is an important boundary for buyers comparing lightweight tripods versus heavier-duty stands.
Pros and cons in plain English
Where it shines
- Convenience: If your goal is to mount and align a compatible laser level quickly, this tripod is built for that everyday task.
- Adjustability: The combination of height range, 3-way head movement, and bubble leveling covers many common positioning needs.
- Portability: The 17-inch minimum length plus included carrying pouch makes it easier to transport than bulky stands.
Where buyers should be cautious
- Load capacity: If your laser setup or accessory stack is heavy, the 6.6 lb limit could be a deciding factor.
- Leg rigidity tradeoff: Some feedback indicates the legs may not feel as strong as desired, which is consistent with lightweight tripod designs. If your work involves frequent adjustments or windy/outdoor conditions, evaluate your stability needs carefully.
Price and availability
This model is listed as in stock in the US at a budget-friendly price point (for the category of complete tripods with a 1/4"-20 mount). For the most current cost, check the live listing.
Comparison guidance (how to choose against similar tripods)
Since no specific competing models were provided, here is a practical checklist for comparing alternatives in the same tripod category:
- Confirm your mount: Make sure your laser level or accessory uses 1/4"-20 threads. If it uses a different mount size, you may need an adapter.
- Match height range: Compare minimum and maximum height to your typical setup. If you frequently need very high placement, prioritize larger maximum height than 52 inches.
- Check load limit: If your device is on the heavier side, choose a tripod with a higher weight rating than 6.6 lb.
- Look for leveling and head movement: If you value a bubble level and a head that handles both rotation and sideways tilt, make sure the alternative includes comparable controls.
Verdict
The DegLasers laser level tripod is a practical choice for buyers who want a portable aluminum stand with a universal 1/4"-20 mount, a 17 to 52 inch height range, and a 3-way pan-tilt head plus bubble level. It is best for lighter laser leveling and camera or projector setups where portability matters, with the key caution being the relatively limited 6.6 lb weight capacity and potential leg stiffness tradeoffs for long sessions or demanding environments.
FAQ
Will this tripod fit my laser level?
It is designed for tools that use a universal 1/4"-20 threaded mount. If your laser level has a 1/4"-20 hole, it should be compatible.
How tall does the tripod go?
The tripod height is adjustable from 17 inches to a maximum of 52 inches, using four extension settings.
Does it have a way to level the setup?
Yes, it includes a built-in bubble level to help you check and adjust leveling during setup.
What type of head does it use?
It uses a 3-way pan-tilt head, allowing 360-degree horizontal rotation and an adjustable 90-degree sideways tilt, which helps with angled measurements.
What is the weight limit?
The listed weight limit is 6.6 pounds, so it is intended for lighter tools rather than heavy instruments.
Specifications
| Product Title | Laser Level Tripod,1/4"-20 Thread Mount,18" Lightweight Aluminum Portable Adjustable Tripod with 3-Way Flexible Pan Head, Bubble Level, Non-Skid Feet, Carrying Pouch Included,Black |
|---|---|
| Category | Electronics > Camera & Photo > Tripods & Monopods > Complete Tripods |
| Brand | DegLasers |
| Manufacturer | DEGLASERS |
| Model Name | T-13 |
| Model Number | T-13 |
| Screen Size | 17 Inches |
| Color | black |
| Material | Aluminum |
| Item Length | 52 Inches |
| UPC | 798439688110 |
| Unit Count | 1.0 Count |
| Manufacturer Part Number | T13 |
| Item Type Name | Tripod. |
| Built-In Media | Tripod |
| Maximum Height | 52 Inches |
| Minimum Height | 17 Inches |
| Leg Diameter | 15 Inches |
| Folded Size | 17 |
| Item Dimensions D x W x H | 3.54"D x 3.54"W x 17.72"H |
| Compatible Devices | Camera, Laser Level |
| Features | Adjustable, Lightweight, Pan-handle |
| Weight Limit | 6.6 Pounds |
| Head Type | Pan Heads |
| Number of leg sections | 3 |
| Material Type | Aluminum |
| Audio Recording | No |
Recommended next
JOILCAN Tripod Camera Tripods, 74" Tripod for Camera Cell Phone Video Photography
The JOILCAN 74-inch tripod is a lightweight, travel-friendly option built for both cameras and phones. It offers a 3-way pan head for smooth panning and tilting, height adjustment from 19 to 74 inches, and quick-release mounting for faster setup, with a practical carry bag included. The main caveat is that the head and some fittings are not all-metal, so it is best suited to lighter, everyday kits rather than heavy pro builds.
Sensyne 64" Camera Tripod Stand, Versatile Phone & iPad Tripod with Wireless Remote and 2-in-1 Phone Holder
A lightweight aluminum tripod designed for phone and iPad creators, with a 2-in-1 expandable holder, a 3-way pan head for different shooting angles, and a pocket remote (33 ft / 10 m). Best for mobile video, vlogging, and livestream setups, with a key limitation: it is aimed at light devices, not heavy DSLR loads.
GoPro Camera Shorty (Mini Extension Pole + Tripod) (GoPro Official Mount), Black (AFTTM-001)
The GoPro Shorty is a pocket-size extension pole plus tabletop tripod designed for quick setups on travel days, group shots, and hard-to-reach angles. Buyers like its portability and “desk tripod” usefulness, with the main caveat being limited extension and a slightly flimsy feel at full reach.
PICTRON MT-24 Portable Desktop Mini Tripod (Aluminum, 360° ball head)
The PICTRON MT-24 is a compact aluminum tabletop tripod designed for creators who want quick, stable camera positioning on desks, sets, and travel days. It supports up to 5 kg (11 lb), uses a 360° ball head, and includes a side cold shoe for adding a microphone or light. The main tradeoff is that it is a small desktop style tripod, so it is best for tabletop shots and vlog-style angles rather than full-size standing setups.