Lamicall Magnetic Phone Ring Grip for MagSafe
Quick take
The Lamicall Magnetic Phone Ring Grip for MagSafe is a slim finger ring holder that snaps to MagSafe-compatible iPhones (or a supplied metal ring for certain non-MagSafe setups). It uses a one-sided magnet and a damped inner ring for steadier multi-angle positioning, making it a solid choice for one-handed handling, selfies, and stand use. The main caveat is that you will need to remove it to use wireless charging.
Pros and cons
Pros
- Strong magnetic hold for everyday use, described as secure with no worries about the grip coming loose for multiple buyers.
- Smooth 360° rotation with built-in resistance, helping users keep angles steady while holding or propping the phone.
- Multi-use design (finger grip, desktop kickstand, and compatibility with magnetic car mounts).
- Thinner profile for pocket carry, with buyers noting the phone still slides into pockets or purses.
Cons
- One-sided magnet means it will not attach to metal surfaces directly, and you may need the included metal ring for some cases.
- Wireless charging requires removal of the grip.
- Tight removal can take practice, and some users describe it as resistant to pull off one-handed.
What buyers think
Buyer-review evidence is broadly positive for grip security, rotation behavior, and everyday convenience. Multiple shoppers highlight the magnet as strong and dependable, including for use with magnetic car mounts. The rotating ring design is also a recurring theme, with users appreciating that the movement feels controlled rather than wobbly, which helps with portrait, landscape, and viewing angles. Several buyers also mention that the accessory stays fairly slim for pocket and purse carry.
How the grip works (and what to check before you buy)
This is a ring-style grip with a magnetic base meant to attach to MagSafe iPhone models. It is designed for one-handed holding and can also function as a kickstand for desk or tabletop viewing. The rotation is built into the ring mechanism, allowing you to set comfortable angles instead of locking into a single position.
A key detail is that the magnetic attachment uses a one-sided magnet. That affects compatibility: it is intended to work with MagSafe setups, and for non-MagSafe cases/devices you would need to use the included metal strengthen plate on hard, flat surfaces (not soft silicone or flexible TPU-type materials).
Magnet strength and rotation behavior in real use
The accessory is marketed with a strong one-sided magnetic pull (up to 4.4 lbs) for secure attachment. Review themes support that it generally feels stable in daily scenarios like pocket carry and moving the phone in and out, with buyers describing no issues with it falling off during normal use. There is also consistent mention that removal takes deliberate effort. If you regularly detach and reattach your grip many times a day, expect a short adjustment period.
The inner ring is intended to rotate with resistance rather than free-spinning. Buyers describe this as “clever” and “sufficiently stiff,” which helps the phone stay positioned when you hold it in different orientations or set it up as a stand.
Pocket carry and one-handed handling
Ring grips are often either bulky or awkward for carrying. Here, shoppers repeatedly comment that the profile is slim enough to slide into pockets or purses without becoming a major inconvenience. For one-handed use, the ring design aims to reduce strain by giving you a stable place for your finger while browsing or taking quick photos. Some buyers also note that getting your finger under the ring for the first time can feel tough, especially if you want to operate it one-handed immediately.
Kickstand and car-mount compatibility
Beyond being a finger grip, this model is meant to work as a desktop kickstand. Buyers also mention it holds well on a magnetic car mount, which is a common use case for ring holders that you want to keep attached while driving. If you already use magnetic mounts, this category fit is one of the stronger reasons to consider this style.
Wireless charging tradeoff
Because it is a magnetic ring grip, you will need to remove the grip when using wireless charging. The listing notes that the included metal ring does not affect wireless charging performance, but the grip itself still needs to come off. If your routine depends heavily on MagSafe wireless charging, factor this extra step into your decision.
Who this is best for
- You want a slim ring grip that supports portrait and landscape positioning with controlled rotation.
- You have a MagSafe iPhone and want something that stays stable for pocket carry and quick photo use.
- You use a magnetic car mount and want a grip that can work with it.
- You want a grip that can also prop your phone as a simple kickstand.
Who should avoid it (or consider another style)
- You use wireless charging constantly and prefer accessories that stay in place while charging.
- You want the grip to stick to metal surfaces directly without adding the included plate (the magnet is one-sided and requires the intended MagSafe setup or metal plate method).
- You strongly prefer a grip that is easy to remove instantly with minimal resistance.
- You use a soft, flexible case type where a metal plate is not appropriate.
Verdict
The Lamicall Magnetic Phone Ring Grip for MagSafe is a practical choice for shoppers who like ring grips but want a steadier, more controlled rotation and a slimmer feel for everyday carry. It is especially compelling if you use MagSafe, magnetic car mounts, and occasional stand viewing. The biggest practical drawback is the need to remove it for wireless charging, and removal takes some strength and practice.
FAQ
Does this work directly on non-MagSafe cases?
It is designed to attach to MagSafe iPhones, and for non-MagSafe cases/devices it relies on using the included metal strengthen plate on a hard, flat surface. It is not intended for soft silicone or flexible TPU-type cases.
Will it stay on my phone in pockets and purses?
Buyer feedback generally describes the magnet as strong and reliable for everyday pocket carry, with no recurring reports of it falling off during normal use.
Can I leave it on while using wireless charging?
No. You need to remove the grip for wireless charging.
Is the ring easy to remove when I need the phone back quickly?
It can feel resistant, and some buyers describe it as requiring some force to pull off. That usually improves after you get used to the grip removal motion.
Does it work with magnetic car mounts?
Review themes include that it holds well on magnetic car mounts, which is one reason people choose this ring-grip style.
Specifications
| Product Title | Lamicall Magnetic Phone Ring Grip for MagSafe - 360° Rotation Strong Magnet Finger Ring Holder Grip Stand, Mag Safe Kickstand Accessories for Mom iPhone 17 16 15 14 Air Pro Max, Androids, Misty Black |
|---|---|
| Category | Cell Phones & Accessories > Accessories > Grips |
| Brand | Lamicall |
| Manufacturer | Lamicall |
| Color | Misty Black |
| Material | Rotating Inner Ring |
| Additional Features | [4.4lbs Strong Magnet] [Work with Magnetic Car Mount] [One-Sided Magnetic Ring] [Inner 360° Rotating Ring] [[Remove for Wireless Charging] |
| Grip Type | Ring Grip |
| Mount Type | Magnetic |
| Compatible Cellular Phone Models | Apple iPhone 14, Apple iPhone 16 Plus, Apple iPhone 17, Apple iPhone Air |
| Enclosure Material | Rotating Inner Ring |
| Built-In Media | Magnetic Phone Ring Holder x1, Metal Strengthen Plate x1, Size: Φ2.32"(Outer Ring) * Φ1.2"(Inner Ring) * 0.17"(Thickness), User's manual x1, Weight: 1.12 ounce |
| Unit Count | 1.0 Count |
| Special Feature | [4.4lbs Strong Magnet] [Work with Magnetic Car Mount] [One-Sided Magnetic Ring] [Inner 360° Rotating Ring] [[Remove for Wireless Charging] [4.4lbs Strong Magnet] [Work with Magnetic Car Mount] [One-Sided Magnetic Ring] [Inner 360° Rotating Ring] [[Remove for Wireless Charging] See more |
Available variants
Color
- Crystal White
- Dark Green
- Pastel Pink
- Pure White
- Crystal Pink
- Crystal Black
- Deep Blue
- Misty Black
Recommended next
Case-Mate Minis - Cell Phone Stand/Grip - Suction Cup Cell Phone Holder (Twinkle Stardust)
Case-Mate Minis is a detachable suction-cup phone grip and mini stand designed for secure one-handed use. It’s built for smooth surfaces, includes an adhesive disc for textured cases, and can be removed so you can use MagSafe or wireless charging accessories (when compatible with your phone/case setup).
PopSockets Adhesive Phone Grip, Holder, Phone Stand, Celestial - Celestial Mauve
A slim adhesive PopSocket that adds a more secure one-hand grip and a simple kickstand for viewing videos and taking video calls. Best for buyers with smooth, hard plastic cases who want an easy-to-swap, design-forward phone grip, with the main caveat that adhesive performance is case-dependent.
OCTOBUDDY Classic - Silicone Suction Phone Case Adhesive Mount (Chalk Pink)
The OCTOBUDDY Classic uses a silicone suction pad with adhesive backing to create hands-free phone mounting on smooth surfaces like mirrors, windows, and tiles. It’s small and flexible, and multiple review themes point to a strong hold and easy repositioning, with the main caveat being that the adhesive may need time to settle or re-application for longer-term performance on some setups.
PopSockets Adhesive Phone Grip, Holder, Phone Stand, Glitter - Iridescent Confetti White
The PopSockets Adhesive Phone Grip is a slim, adhesive phone holder that improves grip and can fold into a stand for hands-free viewing. It’s a good fit for shoppers who want a swappable top and an iridescent glitter look, with the main caveat that adhesion works best on smooth, hard (non-silicone, non-textured) cases.