Lamicall Car Headrest Tablet Holder
Quick take
The Lamicall Car Headrest Tablet Holder is a foldable headrest mount made to hold 5.4 to 13 inch tablets in the back seat for road-trip entertainment. Buyers commonly highlight quick setup and a secure fit that works with tablets both with and without protective cases. The main limitation to double-check is compatibility: it only fits vehicles with headrest rods, and the rod spacing must fall within 72 mm to 155 mm.
Pros and cons
Pros
- Telescopic extension arm with a tightening knob for angle and viewing distance adjustments.
- Metal crossbar and anti-slip rubber pads to help keep tablets stable and protected.
- Foldable clip design, so it retracts when not in use to reduce rear-seat obstruction.
- Supports many popular devices in the 5.4–13 inch range, including iPad and Galaxy Tab models.
Cons
- Requires headrest rods, so it will not work on vehicles without headrests.
- Headrest rod distance needs to match the supported range (72 to 155 mm), which may exclude some cars.
- Fit is limited to a tablet thickness up to 0.9 inches (23 mm), so very thick cases or add-ons could be an issue.
What buyers think
Buyer-review evidence is consistently positive for setup and day-to-day use. Multiple reviewers describe installation as quick and easy, including the ability to mount and unmount the holder rapidly. People also tend to mention that the mount can hold their tablets firmly enough for rear-seat viewing, and that it works with common protective cases without forcing them to remove the case. Review evidence also points to smooth orientation changes (landscape to portrait) and a stable fit when positioned correctly on the headrest.
What it is and why people buy it
This is a headrest-mounted tablet holder built for back-seat entertainment. Instead of installing a dedicated rear entertainment system, it lets you attach a tablet to the seat headrest and angle it for easier viewing. That makes it especially appealing for families using tablets for kids on long drives, or for anyone who wants a simple, adjustable screen mount without permanent wiring or vehicle-specific hardware.
Design and fit: the details that matter
Foldable, headrest-mounted clip
The holder uses a foldable clip so it can retract when you are not using it. That can help keep the rear seat from feeling crowded during non-screen trips.
Stability features for bumpy rides
For stability, it combines a telescopic extension arm with an adjustable tightening knob, plus a metal headrest crossbar. Anti-slip rubber pads are included to help reduce scratching and slipping while driving.
Compatibility checklist (read this before buying)
- Screen size range: supports tablets with 5.4 to 13 inch diagonal displays. (This is based on screen diagonal, not the tablet case size.)
- Tablet thickness limit: the clip fits up to 0.9 inches (23 mm) max thickness.
- Headrest rod requirements: it is designed for vehicles with headrest rods.
- Rod distance range: headrest rod spacing must be between 72 mm and 155 mm.
- Supported rod diameter (hook): the diameter of the headrest hook is 12 mm.
If you measure your headrest rod spacing before ordering, you can avoid the most common buyer frustration with headrest mounts, which is a “looks compatible, but won’t fit” situation.
Setup experience and everyday usability
Review evidence suggests the mount is straightforward to install and adjust, with many buyers describing quick installation and easy attachment. In daily use, it is positioned to allow viewing angles that work for road-trip entertainment, and users also mention it can rotate smoothly between landscape and portrait orientations once the tablet is secured.
Pros and cons (expanded)
Pros you will likely appreciate
- Angle and reach adjustments: the telescopic arm and tightening knob are designed to help dial in viewing distance and angle.
- More secure mounting: metal crossbar construction plus anti-slip pads are intended to keep the tablet from shifting.
- Case-friendly in many scenarios: buyers report the mount can work with common protective cases, reducing the need to remove them.
- Less clutter when not in use: the foldable clip retracts away from the way.
Cons or limitations to keep in mind
- Headrest-dependent: no headrest rods, no mount. It is not a universal seatback strap style.
- Fit depends on your car’s headrest geometry: rod spacing (72 to 155 mm) is a key constraint.
- Thickness limit: tablets plus thick cases must stay under 23 mm total thickness.
Who should buy this tablet mount
- Families using tablets in the back seat: a practical way to keep kids entertained without a factory rear screen.
- Shoppers with compatible headrests: if your car’s headrest rod spacing falls within 72 to 155 mm, this is a strong match.
- Buyers who want adjustable positioning: the telescopic arm is aimed at getting the screen to the right viewing distance and angle.
- People who prefer a retractable mount: the foldable clip can reduce obstruction when you are not using it.
Who should avoid it
- Vehicles without adjustable or usable headrest rods: the mount cannot attach without headrests.
- Cars with headrest rods outside the supported distance: if your rod spacing is below 72 mm or above 155 mm, it may not fit properly.
- Shoppers with very thick tablet setups: if your tablet plus case exceeds 0.9 inches (23 mm), you may need a different mount.
Value verdict
The Lamicall Car Headrest Tablet Holder is a solid, stability-focused option for back-seat tablet entertainment, with features aimed at keeping devices from slipping and letting you adjust angle and reach. It is best viewed as a “fit first” purchase, because the deciding factor is your headrest rod spacing and your tablet’s total thickness. If those measurements line up, buyer feedback suggests it is easy to live with, not just a one-time install.
FAQs
Is this tablet holder compatible with my iPad or Galaxy Tab?
It is designed for tablets with 5.4 to 13 inch diagonal screens and up to 0.9 inches (23 mm) thickness. It supports a wide range of iPad and Galaxy Tab models, but you should still confirm screen size and thickness for your specific device and case.
Will it work in any car?
It needs headrest rods to mount. It also depends on headrest rod distance being within 72 mm to 155 mm. If your vehicle lacks usable headrests or the rod spacing falls outside that range, the mount will not fit.
Does it hold tablets with protective cases on?
Review evidence indicates it can work with common protective cases for several tablet models. The key requirement is that the tablet plus case remains within the 0.9 inch (23 mm) thickness limit.
Can the screen rotate between landscape and portrait?
Buyers report it can switch orientations smoothly, as long as the tablet is securely clipped and the mount is properly adjusted on the headrest.
Is the mount foldable when not in use?
Yes. The holder uses a foldable clip design that retracts so it does not stay in the way when you are not using it.
Specifications
| Product Title | Lamicall Car Headrest Tablet Holder - [Foldable Clip] [Lockable] Tablet Mount for Car Backseat, Car Accessories for Kids, for iPad Pro, Air, Mini, Galaxy Tab, Fire HD, 5.4-13" Tablets |
|---|---|
| Category | Electronics > Computers & Accessories > Tablet Accessories > Mounts |
| Brand | Lamicall |
| Manufacturer | Lamicall |
| Model Number | STCH05-US-BK-1 |
| Color | Black |
| Compatible Devices | Tablets |
| Compatible Phone Models | Compatible with 5.4 - 13 inches tablet and phone, Such as 2025/ 2024 iPad Pro 11/12.9, 2024 iPad air, 2022 iPad 10.9, iPad 10th Generation, iPad mini 6, iPad air 6/5/4/3/2/1, iPad 10.2, iPad mini 5/4/3, iPad mini 8.3, iPad mini 7.9, iPad Pro 9.7, iPad pro 10.5, iPad 10th 9th 8th 7th 6th 5th 4th 3th 2th Generation, iPhone 17, iPhone 17 Pro, iPhone 17 Pro Max, iPhone Air, iPhone 16, iPhone 16 Plus, iPhone 16 Pro, iPhone 16 Pro Max, iPhone 15, iPhone 15 Plus, iPhone 15 Pro, iPhone 15 Pro Max, iPhone 14 Pro Max, iPhone 14 Pro, iPhone 14 Plus, iPhone 14, iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 13 mini, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini, iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS, iPhone XS Max, iPhone XR, iPhone X, iPhone 10, iPhone 8, iPhone 8 plus, iPhone 7, iPhone 7 plus, iPhone 6, iPhone 6s plus, iPhone SE, Galaxy, Google Nexus, Switch, Kindle. |
| Mounting Type | Headrest |
| Additional Features | Adjustable |
| Compatible with Vehicle Type | Automobile, Truck, SUV |
| Unit Count | 1.0 Count |
| Enclosure Material | Metal, Plastic, Silicone |
| Mfr Part Number | STCH05-US-BK-1 |
| Warranty Description | 2 Year Warranty |
| Built-In Media | tablet holder for car |
Available variants
Color
- Black
Recommended next
Lamicall Gooseneck Tablet Holder, Tablet Stand
A flexible gooseneck clip stand designed for 4.7 to 10.5-inch tablets and e-readers, aimed at comfortable reading and viewing from desk or bed. It offers adjustable positioning and easy mounting, but it is mainly for low-interaction use, and some buyers report the arm or base hardware can fail over time if moved or adjusted aggressively.
MAGIPEA Gooseneck Tablet Holder for Bed, Flexible Tablet Stand Holder
The MAGIPEA gooseneck tablet holder is a clip-on mount with a reinforced flexible arm and a 360° rotation clamp, designed for hands-free use on beds, desks, and tables. It’s a strong fit for people who want an easy way to position a 4.7 to 13-inch tablet or compatible e-reader, but you may need two hands to set the viewing angle and to manage stability with heavier devices.
eSamcore Tablet Holder for Car, for iPad Stand Cup Holder review
The eSamcore tablet cup holder mount is built for drivers and back-seat riders who want a stable, adjustable screen without permanent dashboard installation. It clamps into a car cup holder (with expandable pads), supports many tablets and phones up to 12.9-inch class devices, and uses a deep grip plus protective silicone to handle thick cases. The main tradeoff to consider is arm sway, since some users report more upper-bracket movement than they expected.
Lamicall Car Headrest Tablet Holder (3-in-1 Adjustable Extension Arm)
The Lamicall car headrest tablet holder is built for back-seat viewing, with a metal headrest crossbar, a twist-and-extend biaxial arm, and 360-degree rotation to reduce neck strain on road trips. It’s designed for 4.7 to 11-inch devices, but you need the right headrest rod spacing, it’s not meant for headrests without rods, and thicker tablet cases may not fit securely.