Kos Design cable management box with included mounting hardware (ABS cord organizer)
Quick take
This enclosed ABS cable management box is built to hide a power strip and bundled cords, either mounted on the wall or used on the floor/desk. Reviews consistently mention a clean, stylish look and that it can fit a surge protector and plugs with some planning. The main buying caveat is installation method: the included adhesive strips may be less dependable than using the included screws and wall plugs.
Pros and cons
Pros
- Fully enclosed design helps keep cables out of easy reach for kids and pets.
- Heat-tolerant construction with vent-style openings for typical power-strip warmth.
- Generous internal space (11.8 × 6.3 × 3.9 in) for a power strip and cable bundles.
- Mounting flexibility, includes screws plus wall plugs and 3M adhesive strips.
Cons
- Included adhesive strips may not hold as well as screw mounting for some setups.
- Some buyers note edges can feel sharp, which may matter if you are frequently handling the enclosure.
- Heat management may be limited if you pack the box tightly with multiple devices, so leave room and airflow where possible.
What buyers think
Buyer-review evidence is limited, but the recurring themes are clear. The enclosure is widely viewed as a practical way to reduce visible cable clutter (for example, under a desk or near a couch). Multiple buyers found it large enough to hold a surge protector or power strip along with connected plugs, and they describe the box as sturdy and good-looking rather than flimsy. Installation is a split story: wall or surface placement is straightforward, and while several people like the adhesive option, at least one review describes adhesive failure after a short time, switching to more secure strips. A separate note suggests the venting helps but that adding extra ventilation can be worth considering if your setup runs warmer or is densely packed.
Who this cable management box is best for
- People who want a clean, hidden look for an under-desk, media-console, or couch-area power strip.
- Buyers who need options for placement, wall-mounting or floor/desk use.
- Homes with kids or pets that benefit from a fully enclosed cable area.
- Users matching the size envelope, especially if your power strip and adapters can fit within roughly 11.8 × 6.3 × 3.9 in internal space.
Size, materials, and fit
The box is made from ABS plastic (enclosure material is ABS). Externally, it’s listed around 12.6 × 7.75 in, with an internal space of 11.8 × 6.3 × 3.9 in. In practice, buyers describe successful installation for a surge protector and related plugs, but it does take some placement planning. If your power strip is unusually wide, bulky, or has adapters that extend sideways, measure your devices against the internal dimensions and confirm the cable and plug clearance where they enter the enclosure.
Heat-tolerant design, and what to watch
This model is positioned as heat-tolerant, with openings that can help dissipate typical power-strip warmth. That said, review feedback suggests you should think about how tightly you pack the enclosure. If you plan to fit multiple devices, thick adapters, or anything that runs warm, aim for better spacing and airflow rather than compressing everything inside.
Installation options: screws vs adhesive strips
The package includes mounting screws and wall plugs, plus 3M adhesive strips for drill-free installation. Reviews indicate both methods are workable, but the adhesive path may be less reliable on some surfaces or if the setup’s weight and leverage stress the bond. If you want the most dependable placement, screw mounting is the safer bet. If you choose adhesive, take time to clean the surface thoroughly and avoid stressing the unit right after application.
Pros and cons, in plain English
Pros
- Cleaner setup by hiding a power strip and connected cables in one enclosed box.
- Flexible placement because you can mount it or set it up for floor/desk use.
- Child/pet friendly concept with cables contained in a minimalist enclosure.
- More durable feel than “cheap” alternatives, based on buyer descriptions of sturdy construction.
Cons
- Adhesive strips may underperform compared with drilling, so be prepared to switch to stronger mounting strips if needed.
- Edges can feel sharp for some users, especially if you handle the enclosure frequently during setup.
- Thermal performance depends on your load, if you pack the box with many adapters or warm devices.
Verdict: is it worth it?
This cable management box is a solid pick if your goal is to hide a power strip and reduce visible mess, especially in living areas or workspaces. It offers the key practical features people look for, enclosure design, heat-tolerant intent, and enough internal room for a surge protector plus plugs. The biggest decision point is how you plan to install it. If you can drill and want maximum hold, it aligns well with that. If you need a strictly drill-free mount, consider that the included adhesive solution may not be the most robust choice for every surface.
Ready to compare it with current listings? Buy on Amazon
FAQs
How big is the Kos Design cable management box internally?
The internal space is listed at about 11.8 × 6.3 × 3.9 inches. The outside dimensions are roughly 12.6 × 7.75 inches.
Can it fit a surge protector or power strip with adapters?
Many buyers report fitting a surge protector and connected plugs, but fit depends on your strip’s width and how far the adapters extend. Measure your device against the internal dimensions and plan for plug entry clearance.
Is the adhesive mounting strong enough, or should I use screws?
The box includes both screws and wall plugs, and 3M adhesive strips. Review evidence suggests screw mounting can be more dependable than relying on the included adhesive in some situations.
Is it safe around kids and pets?
It is an enclosed design intended to keep cables contained and out of easy reach, which can help in homes with kids or pets.
Does it handle heat from power strips?
It’s designed to be heat-tolerant and includes openings to help dissipate typical warmth. If your setup runs warm or you pack many devices, allow space and consider extra airflow.
Can this be used without mounting on the wall?
Yes. It can be used in a wall-mounted setup or placed on the floor or desk.
Specifications
| Product Title | Cable Management Box with Included Mounting Hardware – ABS Cord Organizer (12,7 x 7,8 x 4,5 in) | Heat-Tolerant Power Strip & Cable Storage | Wall-Mountable or Floor Use |
|---|---|
| Category | Electronics > Accessories & Supplies > Cable Organizer Bags & Cases |
| Brand | Kos Design |
| Manufacturer | Kos Design B.V. |
| Color | White |
| Material | Acrylonitrile Butadiene Styrene |
| Item Weight | 800 Grams |
| Product Dimensions | 12.6"L x 7.75"W |
| Indoor Outdoor Usage | Indoor |
| Number of Pieces | 1 |
| Unit Count | 1.0 Count |
| Mfr Part Number | 1 |
| Enclosure Material | Acrylonitrile Butadiene Styrene |
| Item Dimensions L x W | 12.6"L x 7.75"W |
| Installation Type | Self-Adhesive |
| Style Name | Modern |
| Style | Modern |
Available variants
Color
- White
- Black
Recommended next
Travel Electronics Organizer, Waterproof Cable Organizer Bag for Electronic Accessories review
A double-layer electronics organizer designed to keep chargers, cords, and small devices separated while traveling. Reviewers highlight solid build quality, a waterproof outer feel, and an interior layout that keeps essentials accessible, with the main limitation being that it is sized for up to an 11-inch iPad.
BROWNLILY Cable Management Box, Rattan Style Cord Organizer for Desk review
The BROWNLILY rattan-style cable management box is a decorative cord hider built to conceal power strips and everyday chargers while adding ventilation for safer use. It is a strong pick for families with kids or pets who need to reduce access to cords, though it may not be ideal if you are picky about perfect lid alignment.
ProCase Hard Travel Electronic Organizer Case for MacBook Power Adapter Chargers Cables Power Bank Apple Magic Mouse Apple Pencil USB Flash Disk SD Card Small Portable Accessories Bag
The ProCase hard travel organizer case is designed to protect and separate chargers, cables, small accessories, and other compact electronics during trips. Buyers like the rigid EVA shell, strong zippers, and highly adjustable dividers, but some note it may need extra interior padding for more shock-sensitive gear.
tomtoc Travel Cable Organizer Pouch, Electronics Accessories Organizer Portable Waterproof Double Accessories Carry Case for Cord, Charger, Cables, USB Drive, Black
A compact, slim tech pouch designed to keep cords, chargers, adapters, and small storage media separated while traveling. The standout idea is an easy-access “fan” opening plus multiple pockets and a water-repellent shell, but it’s sized for essentials rather than bulky power accessories.