KEMIMOTO UTV Sound Bar 16 Inch ATV SoundBar Golf Cart Sound Bar
Quick take
This roll-bar mounted KEMIMOTO UTV sound bar is built for 12V vehicles, combining Bluetooth 5.0 streaming, USB and 3.5mm inputs, EQ presets, and RGB music-sync accent lighting. The aluminum enclosure is intended to reduce vibration and help keep audio cleaner on rough rides. The tradeoff to consider is that a few buyers felt it was not loud enough, so it may work best for smaller cabins or riders who prioritize clarity over maximum volume.
Pros and cons
Pros
- All-weather oriented design with IP65 dust protection and water-resistance, plus an emphasis on a sealed chassis (not for submersion).
- Bluetooth 5.0 with a quoted 33 ft (10 m) range, plus wired options via USB and 3.5mm AUX.
- Aluminum enclosure design intended to reduce resonance and improve heat handling for consistent performance.
- Includes 5 EQ presets and onboard or remote control, plus RGB music-sync lighting.
Cons
- Some buyers report it can sound too quiet depending on expectations and the vehicle environment.
- IP65 is designed to resist dust and splashes, but it should not be immersed in water.
What buyers think
Buyer-review evidence is generally positive around setup and everyday usability. Install feedback highlights easy mounting on a top/roll bar, and multiple reports mention that Bluetooth pairing is straightforward. Many comments focus on sound clarity being audible over engine noise, and several buyers also like the included remote and the RGB illumination effects. However, the review evidence also includes at least one clear theme that the unit may not be loud enough for certain setups, so volume satisfaction appears more mixed than the ease-of-use and convenience side.
What this sound bar is (and what it’s for)
The KEMIMOTO 16-inch UTV sound bar is designed to bring music to powersports and outdoor vehicles using a bar-mounted layout. It’s aimed at riders who want an upgrade that is simple to add to a UTV, ATV, or golf cart without drilling, and who prefer a mix of wireless listening (Bluetooth) and direct connections (USB or 3.5mm) for different devices.
Key features that matter for UTV audio
Mounting and fitment for roll bars
It’s meant to clamp to roll bars, using adjustable heavy-duty clamps designed for bar diameters from 1.2 to 2 inches. That “no drilling” approach is a practical fit for many UTV owners who want a reversible upgrade, and it also helps explain why setup is a recurring positive theme in buyer comments.
Power and speaker layout
The system uses a Class A/B amplifier and a 4-inch subwoofer size, paired with 1-inch soft-dome tweeters. The enclosure is built around an aluminum alloy chassis, and the goal is to reduce unwanted vibration and resonance that can happen on rough trails. The listed peak power is 50W, which gives a sense of output class, but in real-world use, volume can still vary based on vehicle cabin size and engine noise.
Connectivity: Bluetooth plus wired backups
For wireless playback, it uses Bluetooth 5.0 with a quoted range of up to 33 ft (10 m). It also supports USB and a 3.5mm AUX input, which is useful when you want a more direct connection for devices that prefer wired audio, or when multiple riders share a phone.
Sound tuning and remote control
There are 5 EQ preset modes: Classical, Jazz, Pop, Rock, and Flat. Buyers looking for quick genre switching without menu-heavy setup will appreciate this. Control is available via a remote and also via the unit’s control panel, making it easier to adjust without reaching constantly across the ride.
RGB music-sync lighting
If you like extra ride atmosphere, the integrated RGB lighting is designed to pulse and flash in sync with the music. It can be controlled with the included remote or onboard controls, and it includes multiple lighting modes, which is a common “fun factor” that shows up in buyer feedback.
Weather handling (IP65)
The sound bar is rated for IP65, targeting dust protection and resistance to water splashes and non-corrosive materials. It is explicitly not intended to be submerged or exposed to heavy rain for long periods, so consider this a “trail day protection” level rather than a fully waterproof underwater device.
Pros and cons, boiled down
- Best for: UTV, ATV, and golf cart owners who want an easy roll-bar mount audio upgrade with Bluetooth, optional wired inputs, EQ presets, and RGB music-sync lighting.
- Great fit if you care about: straightforward installation, clear audio at typical trail volumes, and having a remote to tweak settings.
- Proceed carefully if: you expect “turn-the-whole-parking-lot-up” volume, or you regularly ride in environments where engine noise overwhelms smaller speaker systems.
- Weather note: plan around IP65’s splash and dust resistance, not submersion.
How to choose the right speaker system for your ride
If you are comparing UTV sound bar options, your decision usually comes down to four things: mounting method, input flexibility, real-world loudness expectations, and weather rating. This unit scores well on mounting convenience (clamp fit), connection options (Bluetooth plus USB and AUX), and trail-oriented design (IP65, aluminum chassis). The biggest question is loudness for your specific vehicle and how far you sit from the speakers.
Alternatives to consider (based on priorities)
- If you need maximum loudness: look for larger sound bars or multi-speaker setups with more speaker area than a single 16-inch bar, especially if your UTV cabin is large or you ride with a loud exhaust.
- If you mainly want straightforward outdoor party audio: consider systems with simpler control schemes and higher continuous power ratings, then verify mounting and electrical requirements for 12V setups.
- If you want a more weatherproof design: compare IP ratings and the “not for submersion” caveats, since many powersports audio systems share similar limitations even when they claim water resistance.
Verdict
The KEMIMOTO UTV Sound Bar 16-inch is a solid choice for buyers who want a practical, roll-bar mounted music upgrade with Bluetooth 5.0, wired input options, EQ presets, remote control, and RGB music-sync lighting. It appears to be especially attractive for easy installation and for bringing music that can cut through typical ride noise. Just set your expectations on volume, and be mindful that IP65 is for dust and splashes, not for submersion or prolonged heavy rain.
FAQ
What vehicles is the KEMIMOTO UTV sound bar compatible with?
It is designed for 12V vehicles and fits roll bars from 1.2 to 2 inches in diameter, including many Polaris RZR, Can-Am Maverick, CFMOTO ZFORCE, and other common UTV/ATV and golf cart applications. Use your roll bar diameter as the practical fitment check.
Does it have Bluetooth?
Yes, it supports Bluetooth 5.0 streaming (with a quoted range up to 33 ft / 10 m) and also offers USB and 3.5mm AUX inputs for wired listening.
Is it waterproof?
It has an IP65 rating for dust protection and water resistance, but it is not intended to be submerged or exposed to heavy rains.
How loud is it?
Volume can vary by vehicle environment and expectations. Most buyer feedback points to clear audio that is audible over engine noise, but at least some buyers report it does not feel loud enough for their needs, so consider this a mid-range loudness option.
Is setup difficult?
Setup is generally described as straightforward, particularly due to the adjustable clamp mounting approach that does not require drilling.
Does it include RGB lighting?
Yes, it includes multicolor RGB accent lights designed to pulse and flash in sync with music, with control via the included remote or onboard controls.
Specifications
| Product Title | KEMIMOTO UTV Sound Bar 16 Inch ATV SoundBar Golf Cart Sound Bar SXS Speakers Bluetooth-Compatible with Multicolor LED Lighting Compatible with Polaris RZR Can-Am Defender Maverick X3 CFMOTO ZFORCE |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Audio & Video Accessories > Speaker Systems |
| Brand | KEMIMOTO |
| Manufacturer | KEMIMOTO |
| Model Name | B0117-01901BK |
| Model Number | B0117-01901BK |
| Audio Output Mode | Surround |
| Mounting Type | Bar Mount |
| Enclosure Material | Aluminum |
| Speaker Type | Soundbar |
| Antenna Location | music |
| Subwoofer Diameter | 4 Inches |
| Is Waterproof | False |
| Warranty Type | Limited |
| Maximum Range | 33 Feet |
| Control Method | Remote |
| Speaker Size | 4 Inches |
| Woofer Diameter | 4 Inches |
| Specific Uses For Product | [PARTIAL] Outdoor/Portable Audio Setups |
| Processor Count | 1 |
| MP3 player | No |
| Controller Type | Button, Remote Control |
| Total USB 2.0 Ports | 1 |
| Unit Count | 1.0 Count |
| Item Dimensions D x W x H | 3.9"D x 16.7"W x 5"H |
| Compatible Devices | Laptop, MP3 Player, Smartphone, Tablet |
| Compatible with Vehicle Type | UTV |
Recommended next
Pyle 2-Way Dual Waterproof Off-Road Speakers, 4 Inch 800 Watt Marine Grade Wakeboard Tower Speakers System, Full Range Outdoor Audio Stereo Speaker for ATV, UTV, Quad, Jeep, Boat (PLUTV41BK)
Pyle’s PLUTV41BK is a compact 4-inch, 2-way passive off-road speaker set built for outdoor use. It delivers stereo sound for ATVs, UTVs, and marine applications, with an IP-X5 waterproof rating and a roll-bar style mounting approach, but installation fit and mounting tightness can vary by vehicle.
BOSS Audio Systems BRT26RGB IPX5 Weatherproof Bluetooth ATV Sound Bar
The BOSS Audio Systems BRT26RGB is a 26-inch, amplified ATV sound bar designed for handlebar/roll-bar mounting, with built-in Bluetooth (auto-reconnect), USB and aux input, RCA pre-amp outputs, and IPX5 weather resistance. Buyers highlight clear, punchy sound for everyday off-road use and bright RGB lighting, with the main tradeoff being that it is not meant to replace high-end car audio subwoofer systems.
KEMIMOTO UTV Sound Bar 28 Inch ATV Soundbar 4X Subwoofers 2X Tweeters BT-V5.0
The KEMIMOTO 28-inch UTV sound bar is a roll-cage mounted, weather-ready audio system designed to make your side-by-side or golf cart sound fuller, with four 4-inch subwoofers, 1-inch soft dome tweeters, and Class A/B amplification. It offers Bluetooth 5.0 plus USB and 3.5mm inputs, and buyers highlight easy setup and noticeably loud output, with a key caveat that it does not run on its own battery.
Sena 50S Motorcycle Jog Dial Communication Bluetooth Headset w/Sound by Harman Kardon Integrated Mesh Intercom System Premium Microphone & Speakers
The Sena 50S is a Bluetooth 5.0 motorcycle headset with one-jog-dial control and an integrated mesh intercom for rider-to-rider communication. Reviewers highlight strong audio quality, clear voice pickup, and easy in-ride operation, with battery life described as lasting through all-day riding for many users. The main tradeoff is that setup and speaker positioning can matter a lot for sound, and the Android app experience has been frustrating for some.