KEMIMOTO Sound bar 8 Speakers 32 inch Heavy-Duty Metal ATV UTV Soundbar with Bluetooth and RGB Lights
Quick take
This KEMIMOTO 32-inch ATV/UTV soundbar is designed for roll-bar mounting on off-road vehicles, combining an 8-speaker layout (6 full-range plus 2 tweeters) with Bluetooth, AUX (3.5mm), and USB playback options. The metal housing and IP65 waterproofing are made for dusty, wet, and bumpy rides. The main caveat is that, while it can get loud enough at highway speeds for many buyers, it is not positioned as a bass-heavy “subwoofer replacement.”
Pros and cons
Pros
- Built for powersports use, with roll-bar cage mounting for 1.25 to 2 inch bars and IP65 waterproofing.
- 8-speaker design (6 full-range speakers and 2 tweeters) aimed at immersive stereo sound at speed.
- Flexible audio inputs, including Bluetooth (BT 5.0), 3.5mm AUX, and USB.
- RGB light effects with multiple modes (including music sync and off), controlled by remote.
Cons
- No mention of an included subwoofer, so deep bass expectations may need adjusting.
- Light control depends on the included remote, and misplacing it can limit lighting options.
- Max audio “reach” and connectivity details are limited, so plan your setup around typical in-vehicle Bluetooth range.
What buyers think
Buyer-review evidence is limited but consistent on a few decision factors. Several reviewers emphasize that the soundbar stays loud and clear enough to hear while driving fast, including in noisy setups. Setup is described as straightforward, and Bluetooth pairing is called out as easy. One theme that comes up is that the sound can impress for a budget build, but it still may not “blow you away” compared with higher-end systems, especially if you expect sub-level bass. There is also at least one recurring usability tradeoff related to RGB lighting control, where the remote matters for turning modes on and off.
What you’re getting
The KEMIMOTO KEMIMOTO-6S is a 32-inch stereo soundbar intended for off-road vehicles and similar outdoor use. It uses a metal enclosure and is meant to resist dust and water with IP65 waterproofing, supported by weather-resistant hardware. The speaker layout is built around 6 full-range drivers and 2 tweeters, with stereo output designed to hold up to vibration and road noise. For mounting, it is designed to clamp to a roll bar cage in the 1.25 to 2 inch range without drilling (rubber friction pads are included to help stabilize the unit while driving).
Sound quality and loudness at speed
For powersports shoppers, “loud enough while you’re moving” matters more than studio-grade fidelity. Reviewers who tested it in real rides report that it can be audible even at higher speeds, including with loud exhaust setups. That said, there is still a clear expectation gap to manage: buyers who compare it to premium soundbars describe it as strong for the price and good for everyday listening, but not something that will replace higher-end bass systems.
Connectivity: bluetooth, AUX, and USB
You get three ways to feed audio: Bluetooth (BT 5.0), a 3.5mm AUX input, and a USB jack. Bluetooth pairing is described as easy, which is useful for riders who rotate between phones or guests. AUX and USB are helpful if you prefer a direct cable connection for more consistent playback or if you have a music library on a compatible device.
RGB lights and remote control
The RGB feature set includes 5 light modes: music sync, solid, fading, jump, and off. Music sync is the “showpiece” mode for an immersive vibe, but it is also the mode most likely to be judged by whether the timing feels natural while riding. One practical downside to consider is that lighting control depends on the remote. If the remote is misplaced, you may lose convenient access to light settings.
Weather resistance and durability considerations
This soundbar targets the outdoor use case with IP65 waterproofing and an all-metal, rigid-style enclosure approach intended to reduce unwanted resonance from vibration. While buyers do not provide long-term durability conclusions (the review evidence is limited), the design intent is clearly aimed at sand, dirt, snow, and rain conditions, which are common in ATV and UTV use.
Installation and mounting fit
The soundbar is designed for drill-free mounting, either at the top or bottom of the roll bar cage. The fit is for 1.25 to 2 inch roll bars. Plan to use the included rubber friction pads to keep the speakers steady during driving. If you already have a clean mounting plan, installation is described as easy, but if you are planning a more permanent electrical setup than a simple accessory connection, allow time to tidy wiring.
Pros and cons summary
- Best for: riders who want a loud, off-road-ready roll-bar soundbar with waterproofing, multiple audio inputs, and RGB effects.
- Who should buy: budget-focused buyers building a UTV or golf cart setup who care about hearing audio over wind and engine noise.
- Who should avoid: shoppers who need subwoofer-level bass or who want lighting control that does not rely on a remote.
Verdict
The KEMIMOTO 32 inch metal ATV/UTV soundbar is a solid pick if your top priorities are loudness at speed, weather resistance, and simple in-vehicle connectivity. Expect it to perform as a “budget-loud, adventure-ready” soundbar rather than a full audio system with deep bass. If you like RGB ambience and you keep track of the remote, it can add a fun visual element without complicating the audio setup.
FAQ
Is the KEMIMOTO soundbar waterproof?
It is rated IP65 waterproof, which is intended for exposure to weather such as rain and dusty conditions during outdoor rides.
What roll bar sizes does it fit?
It is designed to mount to roll bar cages that are 1.25 to 2 inch.
How can I connect my music?
You can use Bluetooth, a 3.5mm AUX input, or a USB jack.
Does it include a subwoofer?
The provided details describe a stereo 8-speaker soundbar design, but they do not indicate that an included subwoofer is part of the package.
Are the RGB lights controllable while riding?
RGB modes are controlled by remote, with multiple modes including music sync and an off setting.
Is it easy to install?
It is designed for drill-free mounting, with the ability to mount on the top or bottom of the roll bar cage, typically taking about 20 minutes.
Specifications
| Product Title | KEMIMOTO Sound bar 8 Speakers 32 inch Heavy-Duty Metal ATV UTV Soundbar, Bluetooth Waterproof RGB Light, SXS Sound Bar for Golf Cart 1.25-2 inch Roll Bar Compatible with Can-Am RZR Ranger Rhino Zforce |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Audio & Video Accessories > Speaker Systems |
| Brand | KEMIMOTO |
| Manufacturer | kemimotohunting |
| Model Name | KEMIMOTO-6S |
| Model Number | KEMIMOTO-6S |
| Color | Black |
| Item Weight | 9.07 Kilograms |
| Audio Output Mode | Stereo |
| Mounting Type | Roll Bar Cage |
| Enclosure Material | Metal |
| Speaker Type | Built-In |
| Additional Features | Dustproof, Shockproof, USB Port, Waterproof |
| Antenna Location | Indoor/Outdoor |
| Subwoofer Diameter | 4 Inches |
| Is Waterproof | True |
| Warranty Type | 12 Months Warranty Since Purchase Date |
| Maximum Range | 30 Feet |
| Control Method | Remote |
| Speaker Size | 4 Inches |
| Tweeter Diameter | 1 Inches |
| Water Resistance Level | Waterproof |
| Bluetooth Range | 10 Meters |
| Specific Uses For Product | Outdoor activities, Water-side gatherings, Social events, Parties |
| MP3 player | No |
| Controller Type | Button, Remote Control |
| Unit Count | 1.0 Count |
Recommended next
BOSS Audio Systems BRT26RGB IPX5 Weatherproof Bluetooth ATV Sound Bar
The BOSS Audio Systems BRT26RGB is a 26-inch, amplified ATV sound bar designed for handlebar/roll-bar mounting, with built-in Bluetooth (auto-reconnect), USB and aux input, RCA pre-amp outputs, and IPX5 weather resistance. Buyers highlight clear, punchy sound for everyday off-road use and bright RGB lighting, with the main tradeoff being that it is not meant to replace high-end car audio subwoofer systems.
Sena 50S Motorcycle Jog Dial Communication Bluetooth Headset w/Sound by Harman Kardon Integrated Mesh Intercom System Premium Microphone & Speakers
The Sena 50S is a Bluetooth 5.0 motorcycle headset with one-jog-dial control and an integrated mesh intercom for rider-to-rider communication. Reviewers highlight strong audio quality, clear voice pickup, and easy in-ride operation, with battery life described as lasting through all-day riding for many users. The main tradeoff is that setup and speaker positioning can matter a lot for sound, and the Android app experience has been frustrating for some.
Hogtunes 352F-AA 5.25" Front Speakers (2 Pack), Fits 1998-2013 Harley-Davidson Motorcycles
Hogtunes 352F-AA 5.25" front speakers are a direct-fit upgrade for many 1998-2013 Harley-Davidson Touring bikes. They’re built for clearer, louder sound at highway speeds, with a weather-resistant design and a long 20-year speaker warranty. The main caveat is compatibility with the amplifier setup on 1998-2005 models.
Design Engineering DEI 050331 Boom Mat Speaker Baffles, 6.5" Round Slim (Pack of 2)
Design Engineering DEI 050331 6.5-inch speaker baffles are thin closed-cell polyethylene inserts designed to improve clarity and reduce door-panel resonance and road noise. They can also add a protective, water-shedding barrier around exposed speaker areas, with the main caveat being that proper fit and airflow/porting matters for how your speaker performs.