Kayak Fish Finder Mount with Transducer Mounting Arm, 1.5" Ball Marine Electronic Mount for Boat Track
Quick take
This kayak fish finder mount combines a universal display plate with a transducer mounting arm, letting you set up screen and sonar in one organized, track-based system. Buyers who use Garmin Striker units or Humminbird Piranha setups tend to like the tidy fit and the wide adjustment range, with the main caveat being that the adjustment knobs can interfere during positioning and install or removal.
Pros and cons
Pros
- 1.5-inch double-socket ball base for strong clamping and full-sweep positioning, designed to reduce glare
- Transducer arm extends from about 11.42 in to 17.91 in, useful for different depths and carry positions
- Works with a kayak slide track using a universal track ball and T-bolt, or can be drilled down with the mounting track
- Hardware and materials emphasize corrosion resistance and marine use, including stainless steel screws
Cons
- Knobs can interfere with each other when adjusting or installing/removing, making fine-tuning a bit fiddly
- Some track hardware may require extra screws beyond the included set if you plan to use all track holes
What buyers think
Buyer-review evidence is limited to the snippets available, but the recurring themes are consistent: the mount is generally considered neat and functional when paired with common fish finder models, and it’s described as sturdy enough to hold steady under real-world use (including choppier conditions mentioned by a reviewer). Install steps are often straightforward because the display plate uses pre-drilled holes for certain compatible units, and the transducer angle can be adjusted for the intended sonar setup. The most notable usability complaint is that multiple adjustment knobs may get in each other’s way, slowing down setup changes, especially when working around the kayak slide track.
Who this mount is for
- Kayak and SUP anglers who want a cleaner, one-system approach to mounting both the fish finder screen and transducer.
- People using track-based kayak mounting (or planning to drill down the included track) and who value quick positioning and rotation to manage viewing angles.
- Garmin, Lowrance, and Humminbird owners checking for a compatible universal plate and an arm designed to let you micro-adjust transducer angle.
Key features that matter on the water
360° ball adjustment for viewing and stability
The 1.5-inch double-socket ball mount is built for strong clamping force and smooth repositioning. In practice, this is the part you will reach for to remove glare and bring the screen into a consistent angle while you fish.
Adjustable transducer arm length and angle
The transducer arm extends from roughly 11.42 in to 17.91 in, which can help when you need extra drop or want more clearance for different riding positions and water conditions. A 360° ratcheting slip disc is included for micro-adjusting the sonar angle.
Track-based repositioning (and the option to drill down)
You can slide the mount along an existing kayak track using the included track ball and T-bolt hardware, or you can permanently secure it by drilling down using the mounting track. This flexibility matters if you share gear between different boats or swap your setup locations seasonally.
Universal mounting plate for popular brands
The display adapter plate is designed to fit multiple fish finder and chartplotter families, including listed compatibility with Garmin (Striker 4/Plus/Vivid and ECHOMAP Plus lines noted), Lowrance (Elite, Hook Reveal 5, and Hook 2/4/5 lines noted), and Humminbird (Piranha Max 4Di noted). If your model is outside that list, confirm plate fit before buying.
Pros and cons, in plain language
Good fit if you want a clean, track-friendly setup
The appeal here is organization. Rather than piecing together a separate display mount and a transducer arm, this system is built to keep the components together and adjustable, which can make on-water changes less chaotic.
The main tradeoff is knob interference during adjustment
Some buyers report that the knobs can interfere with each other when you are positioning, installing, uninstalling, or making small tweaks on the kayak. If you frequently change transducer angle while on the water, plan for a slightly more hands-on adjustment process (possibly using both hands) rather than quick dial turns.
Installation and compatibility considerations
- If your build choices are specific, you may want to have a small selection of compatible marine bolts and lock nuts on hand.
- Expect to check included track screws vs.
- Make sure your fish finder model matches the adapter plate: The universal plate is advertised for multiple brand lines, so verify your exact model to avoid a plate mismatch.
Is it worth it?
It’s worth considering if you want a kayak fish finder mount that pairs screen mounting with a transducer arm, supports track-based positioning, and offers full-sweep ball adjustment plus micro-tuning for transducer angle. It may not be the best choice if you want ultra-fast, one-handed adjustments, because knob interference can make fine-tuning and install or removal less smooth.
Alternatives to consider (by buyer need)
- If you prioritize minimal on-water fuss: consider mounts that have fewer overlapping adjustment points or simpler ratchet designs, even if they sacrifice some adjustability range.
- If you mainly need a screen mount only: look for dedicated kayak display mounts and pair them with a separate transducer pole or clamp system that matches your hull and mounting style.
- If you want maximum portability for frequent portage: prioritize designs with simpler fold-away behavior for the arm and reduced adjustment parts that snag during transport.
Price and availability
The mount is listed around the upper $50s to low $60s range, and it appears available in the US marketplace. For the latest price and current stock, check the button below.
FAQ
What fish finder models is this mount compatible with?
It’s designed to work with several Garmin, Lowrance, and Humminbird models, including listings such as Garmin Striker 4/Plus/Vivid and ECHOMAP Plus lines, Lowrance Elite and Hook Reveal 5 and Hook 2/4/5 lines, and Humminbird Piranha Max 4Di. Double-check your exact model for the correct adapter plate fit.
Does it work with a kayak slide track or does it need to be drilled down?
It supports sliding along a kayak track using the included track ball and T-bolt hardware, and it can also be permanently secured by drilling down using the mounting track.
How far does the transducer arm extend?
The transducer arm is designed to extend from about 11.42 inches to 17.91 inches.
Is it easy to adjust the transducer angle while mounted?
The mount includes a 360° ratcheting slip disc for micro-adjusting sonar angle. However, some buyers report that adjustment knobs can interfere with each other during positioning, so fine-tuning may take a bit more effort than expected.
Does it include all the screws needed for track mounting?
Some buyers note that the track mounting screws included may be fewer than needed depending on how many track holes you plan to use. If you want full coverage, consider having extra marine-grade screws on hand.
Can the transducer arm be folded for transport?
Yes. The transducer arm is designed to fold up and stow away when you head home to help prevent damage during transport or portage.
Specifications
| Product Title | Kayak Fish Finder Mount with Transducer Mounting Arm, 1.5" Ball Marine Electronic Mount for Boat Track, Universal Mounting Plate, Compatible with Scotty, Lowrance, Garmin Fish Finders |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Marine Electronics > Marine GPS Accessories |
| Brand | WINDFRD |
| Manufacturer | WINDFRD |
| Model Name | 6d08dff3-c764-4f64-9e4b-c880027ccf99 |
| Model Number | 6d08dff3-c764-4f64-9e4b-c880027ccf99 |
| Color | Black |
| Item Weight | 0.85 Kilograms |
| Compatible Devices | Deepth Finder, Fish Finders, Transducer |
| Compatible Phone Models | Lowrance, Garmin and More Fish Finder, Marine Electronics |
| Mounting Type | Universal Mount |
| Additional Features | install the fishfinder screen and transducer at the same time |
| Weight Capacity Maximum | 10 Pounds |
| Water Resistance Level | Waterproof |
| Compatible with Vehicle Type | Boat |
| Item Dimensions | 12.99 x 4.33 x 3.54 inches |
| Unit Count | 1.0 Count |
| Arm Length | 17.91 Inches |
| Enclosure Material | High-performance Composite Materials, Stainless Steel |
| Warranty Description | 3 Years Warranty |
| Built-In Media | 1.5" Ball Mount Base with T-Bolt Attachment, Double Socket Arm, Drill-down mounting track, Transducer Mounting Arm, Universal Mounting Plate |
| Shape | Rectangular |
Recommended next
TUSITA 010-13129-00 Protective Cover Compatible with Garmin Striker Plus 4, Vivid 4cv
The TUSITA silicone sun cover is designed to protect specific Garmin fishfinder/chartplotter models by shielding the main screen from sun, scratches, and everyday elements. Based on buyer feedback, the standout feature is the snug, well-aligned fit, with a thicker soft cover that stays in place better than some rigid or thinner alternatives.
RAM MOUNTS Fish Finder Mount for Boats, Marine Electronics Drill-Down Mount with Medium Arm and AMPS Plate, Universal RAM-B-111U
The RAM-B-111U drill-down fish finder mount is built for boats that need a stable, adjustable hold for Garmin and compatible fish finders. It uses RAM’s ball-and-socket design for easy aiming, with a power-coated marine aluminum build and a stated maximum 6 lb device capacity, but it may require extra hardware for a perfect device fit.
Humminbird 600033-1 AutoChart Zero Line North America Map SD Card
The Humminbird 600033-1 is a microSD card (with adapter and case) for AutoChart and AutoChart Live workflows. It comes preloaded with “Zero Lines” shoreline data across the U.S. and Canada and lets compatible Humminbird units record depth and bottom detail directly to the card for later use and sharing across multiple fish finders. Best for anglers who plan to build and display custom lake maps, with the main tradeoff being that it adds cost if you only want basic navigation.
Minn Kota 1866550 Bluetooth i-Pilot System Remote
The Minn Kota 1866550 Bluetooth i-Pilot System Remote adds a practical second control point for Bluetooth-enabled i-Pilot setups. It’s built for everyday deck use with a larger LCD, instant status feedback, and an easy battery compartment, but it only works with i-Pilot systems that support Bluetooth (2017+), so compatibility matters.