Kado 1/4" Screw Thread to 17mm Ball Head Bracket Connector Black
Quick take
This Kado adapter bridges 1/4" tripod screw hardware to a 17mm ball-head style bracket, giving you a simple way to mount phones, portable monitors, webcams, GPS units, and similar gear onto a tripod or mount system. The 17mm ball head supports full 360-degree rotation for flexible positioning. The main buying caveat is compatibility: if your existing mount or device uses a different thread or connector style, this may not solve your problem.
Pros and cons
Pros
- 1/4" screw thread to 17mm ball head connector for mounting across common tripod setups
- Ball head allows full 360-degree rotation for adjustable device angles
- Works with a wide range of device types (portable monitors, tablets, phones, cameras, GPS units, action cameras, webcams)
- Black finish and durable materials designed for everyday mounting use
Cons
- Not water resistant, so it is not intended for wet outdoor use
- Fit depends on matching your mount’s screw thread and the 17mm ball-head bracket style
What buyers think
Buyer feedback is limited but generally indicates the adapter is functional for the intended mounting task. Several comments describe it as working as expected or as the needed connector for a specific setup.
What this adapter is for
The Kado 1/4" screw thread to 17mm ball head bracket connector is designed to connect two common parts of a camera and device mounting system: a 1/4" screw-thread mount interface, and a 17mm ball-head bracket. In practice, it is a tool for turning a tripod, monopod, or other 1/4"-compatible mount into a more flexible device-positioning setup, especially when you need to attach small electronics or action-related gear.
Key features that matter day to day
360-degree ball head rotation
The 17mm ball head offers full 360-degree rotation. That flexibility is useful when you need to re-aim a phone, webcam, GPS, or small camera without moving the entire tripod or redoing your entire mount configuration.
Broad “device type” compatibility
This connector is intended for mounting a variety of device categories, including portable monitors, tablets, phones, cameras, GPS units, action cameras, and webcams. That does not mean every device will fit perfectly on every bracket style, but it does suggest it is meant for typical mounting accessory workflows.
Black, compact build for accessory use
It uses a black finish and is built as a small connector accessory, so it is meant to stay lightweight and unobtrusive in a kit. The item weight listed is very low, which can be helpful if you are assembling a compact travel setup.
Compatibility check before you buy
The most important consideration is whether your gear and mount truly match the interfaces this adapter bridges.
- Tripod side: Your tripod or mount should use a 1/4" screw thread interface.
- Device/bracket side: Your receiving component should be compatible with a 17mm ball-head bracket style connection.
- Angle adjustment: If you want smooth re-aiming, the ball head design is the feature you are paying for.
If your current issue is “the connector doesn’t fit,” this is the adapter category to verify carefully. If the mismatch is due to a different thread size or a non-ball-head interface, you may need another type of converter.
Pros and cons, summarized
Buy it if you have 1/4" tripod hardware and you specifically need a 17mm ball-head style connection for a phone, portable monitor, webcam, GPS, or action-camera type setup, and you want 360-degree aiming flexibility.
Skip it if your mounting problem is caused by an incompatible thread size, a different connector standard, or you need gear that can handle wet conditions, since it is not water resistant.
Price and availability
The adapter is positioned as a low-cost, single-accessory connector, and it is listed as in stock for the United States.
Alternatives to consider
If you are shopping because nothing seems to “click” into your existing setup, your best alternative is usually another type of adapter that matches the specific interface you have, such as:
- A different screw-to-bracket converter: when the thread size is close but not the same.
- A full tripod head replacement: if you need more than angle adjustment and want a complete mounting system that matches your devices.
- A clamp-based or shoe-based mount: if your devices use a different attachment style than a 1/4" screw thread.
Choose alternatives based on the compatibility interface first, then on whether you need ball-head rotation or a different adjustment mechanism.
Verdict
The Kado 1/4" screw thread to 17mm ball head bracket connector is a practical small adapter for building or upgrading a device mount where 1/4" tripod hardware meets a 17mm ball-head style connection. With 360-degree rotation, it is a good fit for flexible positioning of phones, portable monitors, webcams, GPS units, and similar gear. Just make sure your current tripod and bracket interfaces match, because that is the key factor behind whether the adapter will actually solve the mounting issue.
FAQ
Is this adapter compatible with 1/4" tripod mounts?
Yes. It is built for a 1/4" screw thread interface on the tripod or mounting side.
What does the 17mm ball head connection mean?
It refers to the ball-head style bracket connection on the other side of the adapter. If your receiving mount or bracket uses a compatible 17mm ball-head connection, this adapter should fit.
Does it offer full angle adjustment?
The 17mm ball head supports full 360-degree rotation, which is intended for flexible aiming.
Can it be used outdoors in wet weather?
It is not water resistant, so it is better suited for dry indoor or controlled conditions.
What devices is it intended to mount?
It is intended for devices such as portable monitors, tablets, phones, cameras, GPS units, action cameras, and webcams, as long as the mount interfaces are compatible.
Specifications
| Product Title | Kado 1/4" Screw Thread to 17mm Ball Head Bracket Connector Black, Adapter Universal for Tripod Portable Monitor, Tablet, Phone, Camera Mounting Accessories, Motocycle Action Camera, GPS, Webcam |
|---|---|
| Category | Electronics > Camera & Photo > Tripods & Monopods > Tripod Heads |
| Brand | Kado |
| Manufacturer | Kado |
| Model Number | 1-4TO17MMBH-B |
| Color | Black |
| Item Weight | 0.01 Kilograms |
| Manufacturer Part Number | 1-4TO17MMBH-B |
| Built-In Media | 1/4" Screw Thread To 17mm Ball Head Bracket Connector |
| Warranty Description | 1 Year Warranty |
| Compatible Devices | Portable monitor, Tablet, Phone, Camera, GPS unit, Action camera, Webcam |
| Audio Recording | No |
| Water Resistance Level | Not Water Resistant |
| Media Type | ProductImage |
| Number of Items | 1 |
Available variants
Color
- Black
- White
Recommended next
Manfrotto Video Head with Flat Base, Video Head for Compact review
The Manfrotto 502 video head (MVH502AH) is built for smooth, adjustable pan and tilt using a variable fluid drag system. It offers a large top plate and a generous sliding connection setup for DSLR and compact camera rigs, with built-in easy-link connectors for accessory mounting. Best suited to creators who want controlled, “buttery” camera moves, but it is a hefty head, and getting the fluid feel right takes a bit of dialing in.
SmallRig Video Head with Leveling Base, Quick Release Plate for Arca Swiss and Adjustable Handle
A compact fluid pan-tilt tripod head with a built-in leveling base, designed for smoother video-style movement with cameras and small cinema setups. Best for buyers who want quick leveling and a lightweight head, with the main caveat that some users report panning can feel sticky unless the unit performs well for you.
Manfrotto 234RC Monopod Tilt Head with Quick Release, Black
The Manfrotto 234RC is a tilt head made for monopods, with a quick-release camera plate and a 90° portrait-to-landscape swing. It is a good fit for photographers who compose by rotating the monopod and want fast camera mounting, but it is not designed for forward-back tilting or delicate, bag-friendly portability.
K&F CONCEPT Professional 28mm Metal Tripod Ball Head 360 Degree
A compact 28mm metal ball head built for DSLR, camcorders, and slider-style rigs up to 22 lb. It offers 360° panoramic positioning, a quick-release plate with bubble level, and a solid feel for its size, with the main tradeoff being limited clearance around the ball tension lever in certain tilt directions.