K&F Concept 360° Rotation Backpack Strap Quick Clip Mount
Quick take
This quick-clip mount lets you attach a compatible action camera to backpack straps, caps, and similar gear, then rotate for fast framing. Buyers like the strong clamp feel and the practical “eye-level” POV it creates, especially for active outings. The main limitation is that it is not water resistant, so plan for dry or protected shooting.
Pros and cons
Pros
- 360° rotation for quick angle changes without remounting.
- Snag-style serrations and strong clamping force for non-slip grip on straps.
- Easy install and release, with a quick-release buckle design.
- Includes a phone clip (for phones 65–102 mm wide), for added versatility.
Cons
- Not water resistant, so it is better for dry conditions or with protection.
- Requires strap compatibility (designed for typical backpack strap widths, roughly 5–7 cm wide).
- Body-mounted action footage can still show normal side-to-side sway during movement.
What buyers think
Buyer feedback is largely consistent around stability, ease of use, and practical POV results. Reviewers describe the clip as gripping securely and feeling stable during active use, with one comparing the perspective to a natural eye-level view. The 360° rotation is repeatedly mentioned as a real convenience for adjusting framing quickly. Several buyers also highlight the overall materials feeling durable and the included phone clip working well for holding a phone. Some commentary points out that body-worn mounts, like any strapped camera setup, can show movement sway, which is something you typically manage with camera stabilization or capture technique.
What it is, and what it’s for
The K&F Concept 360° Rotation Backpack Strap Quick Clip Mount is designed for “clip-and-shoot” action camera setups. You clamp the mount to a strap or similar surface, slide the action camera into the mount, and then use the full rotation range to dial in your angle. It is also a two-in-one idea because the kit includes a phone clip, so you can mount a phone in a similar position for recording or framing.
Compatibility and mounting fit
Action camera compatibility
It is marketed for GoPro-style action cameras (including Hero 13/12/11/10/9/8/7/6/5 Black and Hero 5/4 Session) and multiple DJI Osmo Action models (including Osmo Action 3/4/5 Pro, plus related Osmo 360 and Osmo Nano). It is also positioned as compatible with Insta360 Ace and Ace Pro (and Ace Pro 2), plus other action cameras that use a compatible quick-mount approach.
Where you’ll mount it
This is a backpack-strap oriented mount, but it is also intended for straps and gear like caps. The clamp is designed for conventional backpack shoulder strap widths, roughly 5–7 cm wide, and it uses a non-slip serrated bite. If your straps are much narrower or wider than that typical range, you may need to test fit or consider a different mounting style.
Phone clip compatibility
The included phone clip fits phones approximately 65–102 mm wide. That makes it useful if you sometimes swap between action camera and phone capture, such as on travel days or for quick content clips.
Pros and cons in real-world terms
Why this mount can be a good match
- You want faster angle changes: 360° rotation helps you reframe quickly when you stop moving or adjust where you want the camera aimed.
- You care about a secure clamp: The serrated, strong-bite design is meant to stay put on straps, and buyer comments support that it holds firmly during active scenarios.
- You want one mount for camera and phone: The included phone clip adds flexibility, especially if you already record with a phone at times.
Where it may not be the best choice
- Wet weather shooting: It is not water resistant, so it is not the right pick for repeated exposure to rain, splashes, or heavy wet conditions unless you have protection.
- Unusual strap sizes: Strap width matters here, because the clamp’s bite range is designed around typical backpack shoulder straps.
- Expect some normal movement: With body-mounted setups, side-to-side sway can happen during hiking, exercise, or energetic movement. Stabilization settings or framing choices can help, but it is not eliminated entirely by the mount itself.
Price and availability
This model is positioned as an affordable action camera accessory option, and it is currently listed as available on major US retail channels. For the most accurate current cost, check the listing before you buy.
Verdict: should you buy it?
The K&F Concept 360° Rotation Backpack Strap Quick Clip Mount is a strong pick if you want a strap-based, quick-change mount that can rotate for easy POV framing, and you plan to attach your camera to typical backpack straps, caps, or similar gear. It is especially appealing for shoppers who value a secure clamp feel and appreciate that the kit includes a phone clip. Choose another approach if you need reliable water resistance or if your mounting surface does not match the intended strap width range.
FAQ
- Is this mount water resistant? No, it is not water resistant, so it is best for dry or protected use.
- What action cameras does it fit? It is designed for compatible GoPro action cameras (including Hero 13/12/11/10/9/8/7/6/5 Black and Hero 5/4 Session) and multiple DJI Osmo Action models (including Osmo Action 3/4/5 Pro, plus Osmo 360 and Osmo Nano). It is also positioned for Insta360 Ace/Ace Pro (and Ace Pro 2) and other compatible action cameras using a compatible quick-mount setup.
- Will it fit my backpack strap? The clamp is meant for conventional backpack shoulder strap widths, roughly 5–7 cm wide.
- Does it include a phone mount? Yes. The included phone clip fits phones about 65–102 mm wide.
- How easy is it to adjust the camera angle? It provides full 360° rotation, so you can fine-tune the angle after mounting without repositioning the clip.
Frequently asked questions
Specifications
| Product Title | K&F Concept 360° Rotation Backpack Strap Quick Clip Mount for Hero 13/12/11/10/9/8/7/6/5/4 Black, DJI Osmo Action 5 Pro/4/3/6 and Other Action Camera |
|---|---|
| Category | Electronics > Camera & Photo > Accessories > Action Camera Accessories |
| Brand | K&F CONCEPT |
| Manufacturer | Shenzhen Zhuoer Photograph |
| Model Name | KF31.114 |
| Model Number | KF31.114 |
| Color | Black |
| Item Weight | 0.13 Kilograms |
| Compatible Devices | Cameras |
| Compatible Phone Models | For 65-102mm wide mobile phones |
| Mounting Type | Backpack Strap Mount |
| Additional Features | Rotatable |
| Water Resistance Level | Not Water Resistant |
| Compatible with Vehicle Type | Bicycle, Backpack |
| Item Dimensions | 4.33 x 3.94 x 2.36 inches |
| Unit Count | 1.0 Count |
| Enclosure Material | Plastic |
| Mfr Part Number | P15-KF31.114 |
| Shape | Rectangular |
Recommended next
Sametop Floating Handle Grip Floaty Stick Waterproof Handler Accessory (Green)
A compact floating hand grip for action cameras that helps prevent sinking in the water, improves steadier shooting versus handheld aiming, and doubles as a storage spot for small items. Best for GoPro and many other action camera users who film near water, but it is only a practical solution if you pair the grip with the right camera mount and buoyancy expectations for your exact setup.
Insta360 2-in-1 Invisible Selfie Stick + Tripod, Aluminum Alloy Invisible
The Insta360 2-in-1 Invisible Selfie Stick + Tripod combines an extended selfie pole with a built-in tripod for hands-free framing. It is designed to disappear in 360 footage for “invisible” third-person shots, and its standard 1/4" mount makes it a practical accessory for compatible Insta360 action cameras.
Luxebell Accessories Kit for AKASO EK5000 EK7000 4K WiFi Action Camera (14-in-1)
The Luxebell 14-in-1 action camera accessories kit is a bundle-style solution for AKASO EK5000/EK7000 owners who want more ways to shoot, from a chest harness and head strap to a floating grip and vehicle suction mount. Buyers generally like the variety and value, with a common tradeoff being that setup can feel a bit unintuitive until you learn the parts.
INSTA360 Invisible Dive CASE for X3 Action Camera
The INSTA360 Invisible Dive Case is a waterproof housing made specifically for the Insta360 X3, designed to keep your camera protected while you shoot underwater and still maintain the “invisible” look. Reviews are mixed, with many buyers praising the fit and water/air sealing, but at least one report raises concerns about button performance under deeper pressure. If you dive with an X3 and want a purpose-built housing, it’s worth considering, especially if you’re comfortable verifying fit and handling expectations for your depth.