JCALLY JM6 Pro USB C Type-C to 3.5mm Dual DAC (CX31993 + MAX97220) portable amp adapter
Quick take
The JCALLY JM6 Pro is a compact USB-C to 3.5mm DAC/amp dongle that uses a dual-chip design (CX31993 DAC plus MAX97220 op-amp) to deliver a cleaner, more detailed audio signal than basic headphone-jack adapters. It supports high-resolution PCM up to 32-bit/384kHz and is designed for plug-and-play use across common devices.
The main caveat is power, it is better suited for IEMs and easy-to-drive headphones rather than large planar or other high-demand models.
Pros and cons
Pros
- Dual DAC/amp chipset approach with CX31993 DAC and MAX97220 op-amp.
- Hi-res support for PCM up to 32-bit/384kHz.
- Portable build, very light (about 6.0g ± 0.5g) and compact (about 110mm length).
- Plug-and-play operation and easy connection via USB-C to 3.5mm.
Cons
- Output power may not be enough for very power-hungry headphones (not ideal for large planars).
- Requires a USB-C connection, it will not work directly with phones or devices that lack USB-C (or the right adapter).
What buyers think
Across available feedback, buyers consistently describe the JCALLY JM6 Pro as an easy, reliable upgrade for everyday listening. Many note clearer, cleaner sound with improved separation or more balance compared with basic dongles, and several mention strong enough volume control for IEMs and a wide range of typical headphones. Setup impressions are also positive, with repeated mentions of straightforward plug-and-play use on phones and tablets.
Overall, the evidence points to a dongle that performs well for portable, casual headphone use, with fewer expectations needed for extremely demanding headphones.
What it is and how it fits
The JCALLY JM6 Pro is a USB-C to 3.5mm dual DAC headphone adapter, designed to bring a digital-to-analog conversion and amplification stage into the signal path for mobile and computer audio. If your device has USB-C and you still use 3.5mm wired headphones or IEMs, this type of dongle can be an upgrade path without the bulk of a full-size portable amp.
Key features that matter in daily use
Dual-chip sound processing
It uses the CX31993 DAC paired with a MAX97220 op-amp. In practical terms, that combo is meant to deliver lower noise and low distortion characteristics, which can translate to more detail and better control when paired with sensitive IEMs and mainstream headphones.
High-resolution PCM support
The adapter supports PCM up to 32-bit/384kHz. If you listen to higher-resolution files or streaming tiers that provide PCM formats, this support is relevant for keeping playback within the adapter’s intended capability range.
Output and portability
Rated output is listed at 60mW, and the unit is extremely light (about 6.0g ± 0.5g). It is also about 110mm long, designed to stay pocket-friendly. That matters for commuting, travel, and “always with me” audio setups.
Connection and build details
It is designed for plug-and-play use, with no drivers needed in typical scenarios. Buyers also mention the connection feels stable, and the included 3.5mm female connector is meant to help prevent signal dropouts during everyday movement. The shell design uses a 3D curved aluminum body, aimed at durability and heat dissipation.
Pros and cons for different headphone types
Best for
- People using USB-C phones, tablets, laptops, or desktop setups that still support 3.5mm headphones.
- IEM users who want cleaner signal output and stronger usable volume from a dongle.
- Travel and commute listeners who want a small adapter that stays out of the way.
- Buyers who prefer plug-and-play behavior instead of driver setup.
Who should avoid it (or consider a stronger alternative)
- Anyone using very power-hungry headphones, especially large planar-style drivers, since the listed power is unlikely to meet demanding needs.
- Users with non-USB-C devices that do not have a compatible USB-C connection path.
How it compares to other dongle-style options
Without naming specific models, the key comparison factors are simple. If your priority is higher-resolution PCM support and a dual-chip DAC/amp approach, this class of adapter is a step up from the most basic “USB-C to 3.5mm” cables that focus only on audio pass-through. If your priority is maximum headphone-driving power, you may need a higher-powered dongle or a dedicated portable amp instead of a lightweight USB-C decoder.
In other words, think of the JCALLY JM6 Pro as a practical middle ground: it aims to be noticeably better than barebones adapters for everyday listening, while still staying compact.
Verdict
The JCALLY JM6 Pro is a strong pick for buyers who want a small USB-C to 3.5mm DAC/amp upgrade for IEMs and typical headphones. The dual DAC plus op-amp design, hi-res PCM support up to 32-bit/384kHz, and plug-and-play experience are the highlights. If you are powering very demanding headphones, treat its 60mW class output as a limitation and consider a more powerful setup.
Want to check current availability and pricing? Buy on Amazon
FAQs
Is the JCALLY JM6 Pro compatible with iPhone?
It connects via USB-C, so compatibility depends on having a USB-C iPhone model or using the appropriate USB-C adapter path. It is designed for plug-and-play use across common device types.
Will it work with Android phones and tablets?
Yes, it is intended for USB-C Android devices and supports plug-and-play playback for 3.5mm headphone outputs.
Does it need a driver to work?
No, the adapter is designed for plug-and-play use and does not require driver installation in typical setups.
How good is it for IEMs?
Feedback trends suggest it is a good match for IEMs, with users reporting clearer audio and sufficient volume control compared with basic headphone adapters.
Can it drive high-impedance or planar headphones?
There is some limited buyer feedback indicating it may not have enough power for large planar drivers. For high-impedance or very demanding headphones, it is safer to consider a stronger amp solution.
What audio formats does it support?
It supports PCM up to 32-bit/384kHz.
Specifications
| Product Title | JCALLY JM6 Pro USB C Type-C to 3.5mm Dual DAC CX31993 MAX97220 digital audio portable decoding amp Hifi DAC mobile headset adapter for iPhone 15 plus max Galaxy S23 Ultra Android phone(Silver Blue) |
|---|---|
| Category | Electronics > Headphones, Earbuds & Accessories > Adapters |
| Brand | Girftu |
| Manufacturer | Girftu |
| Model Number | JM6 PRO |
| Item Weight | 0.04 Pounds |
| Color | Silver Blue |
| Compatible Devices | Desktop, Headphone, Laptop, iPhone 15 15 Plus 15 Pro 15 Pro Max,Galaxy S22 S22+ S22 Ultra S21 S21+ S21 Ultra S20 Ultra S20 Z Flip S20+ S10 S9 S8 Plus, Note 20 10 10+ 9 8, iPad pro, iPad mini 6, Mac book, pixel 4 3 2 XL, Huawei Mate 30 20 10 Pro, P30 P20, One plus 6T 7 7Pro and other Android device. |
| Specific Uses For Product | Headphones |
| Connector Type | USB Type C |
| Number of Ports | 2 |
| Current Rating | 0.5 Amps |
| Power Plug Type | No Plug |
| Smart Home Compatibility | Not Smart Home Compatible |
| Finish | Glossy |
| Package Quantity | 1 |
| Unit Count | 1.0 Count |
| Number of Items | 1 |
| UPC | 747781324467 |
| Mfr Part Number | A0519 |
Available variants
Color
- Silver Red
- Silver Blue
Recommended next
UGREEN USB C to 3.5mm Audio Adapter Type C to Headphone Aux Jack Dongle 24bit/96kHz HiFi DAC Cable Cord
The UGREEN USB C to 3.5mm audio adapter is a simple way to use wired 3.5mm headphones with USB-C devices. It’s built for everyday portability and supports up to 24bit/96kHz output, plus in-line volume and calling control on compatible 3.5mm earphones. The main thing to double-check is device compatibility, especially if you are using it with newer phones and specific 3.5mm headset types.
MOSWAG USB C to Dual 3.5mm Female Headphone Splitter, Type C to Dual 3.5mm Female Audio Jack Splitter
The MOSWAG USB C to dual 3.5mm headphone splitter turns one USB-C audio port into two 3.5mm jacks so two people can listen at the same time. Built with an aluminum-alloy shell and a nylon-braided cable, it’s a practical pick for shared movies, road trips, and online learning, with the main caveat that it is not for charging.
JSAUX USB Type C to 3.5mm Female Headphone Jack Adapter, USB C to Aux Audio Dongle Cable Cord
If you upgraded to a USB-C phone or tablet but still want to use wired 3.5mm headphones or speakers, this JSAUX USB-C to 3.5mm female adapter adds an analog audio output. Expect plug-and-play setup for most USB-C devices that support analog audio, with stable day-to-day durability, but limited support for iPhone-specific mic and volume controls.
Stouchi USB C to 3.5mm Audio Adapter (2 Packs) Type
The Stouchi USB-C to 3.5mm audio adapter adds a 3.5mm headphone jack to USB-C devices, with a built-in DAC for audio output and support for calls. Buyers like the plug-and-play setup, braided, bend-resistant build, and a clear indicator LED, but some note the sound can change depending on the headphones and there can be occasional music pausing.