IoT Slash EZ Pass Cover + Holder with Super-Strong Suction Cups
Quick take
This IoT Slash kit combines a silicone “skin” with a compact plastic holder to give your EZ Pass Mini or iPass a more discreet, all-black look both inside and outside your windshield. It mounts using strong suction cups, aiming to avoid adhesive on your glass. The main catch is compatibility, it is made for wedge-shaped EZ Pass Mini/iPass and does not fit older or rectangular EZ Pass models.
Pros and cons
Pros
- Designed for the wedge-shaped EZ Pass Mini/iPass (about 3.7 x 1.9 inches)
- All-black silicone cover helps make the transponder look more discreet
- No adhesive on the windshield, uses a holder with strong suction cups
- Includes interlocking attachment strips to keep the silicone skin and holder together
Cons
- Does not fit older/larger EZ Pass units, EZ Pass Flex with HOV switch, or the newer rectangular EZ Pass model
- Windshield suction performance can vary by surface and placement, so you may need to experiment to get the best hold
What buyers think
Buyer-review evidence centers on three themes: a cleaner, less noticeable look, straightforward setup, and a stable mount. Multiple reviews highlight that the holder is easy to install, the silicone skin fits well with the intended EZ Pass Mini/iPass shape, and the suction-cup mounting stays attached during normal driving. There is also consistent mention of the “finished” look, with the all-black cover blending better than a standard exposed EZ Pass on the windshield.
Overall, buyer-review evidence is strongly positive for fit, appearance, and everyday practicality, but review detail is limited to those themes rather than deep, technical signal-performance testing.
How it works and what you get
This kit is built around two parts: a silicone EZ skin and a plastic holder with suction cups. The intent is to wrap the transponder in a thin layer of flexible silicone while keeping it in a compact holder that mounts to your windshield.
- Silicone skin: Adds the all-black, streamlined look, and helps protect the transponder while it is held in the kit.
- Plastic holder + suction cups: Mounts to the windshield without adhesives touching your car.
- Interlocking strips: The bundle uses genuine 3M dual-lock interlocking strips to connect the silicone skin and holder system.
Compatibility: the biggest thing to double-check
Before buying, confirm your exact transponder model. This kit is for the wedge-shaped E-Z Pass Mini / iPass measuring about 3.7 x 1.9 inches. It is not designed for several other EZ Pass types.
- Fits: wedge-shaped EZ Pass Mini / iPass
- Does not fit: older/larger EZ Pass units, EZ Pass Flex with HOV switch, and the newer rectangular EZ Pass model
If you have any doubt, compare your transponder’s shape to the wedge form factor, because a mismatch is the most likely reason a buyer would end up with poor fit or a system that will not secure properly.
Pros and practical tradeoffs
Clean look with minimal bulk
The all-black silicone cover is the standout feature. Reviews repeatedly call out how it makes the transponder far less visually prominent than a typical white plastic EZ Pass rectangle on the windshield.
Adhesive-free mounting is easier to live with
Instead of sticking strips directly to your glass, this uses a holder with suction cups. In practice, that gives you a more modular setup if you switch vehicles or want to remove the holder without leaving residue behind.
Where buyers may need to adjust expectations
Suction mounting can be sensitive to windshield texture, temperature, and placement. While buyers report the holder stays put during regular driving, you should still expect that fine-tuning your mount location may be part of getting the best grip.
Who this is best for
- You have a wedge-shaped EZ Pass Mini / iPass and want a less noticeable, all-black look.
- You prefer no adhesive on your windshield and want a removable mounting approach.
- You want a compact holder that keeps the transponder tidy without adding a bulky aftermarket setup.
Who should consider skipping it
- You own a different EZ Pass form factor (older/larger units, EZ Pass Flex with HOV switch, or rectangular EZ Pass). This kit is not built for those models.
- You are unwilling to do any trial-and-error with windshield suction placement. If you want a permanently fixed mounting style, you may prefer an adhesive-based option designed for your specific transponder.
Verdict
The IoT Slash EZ Pass Cover + Holder is a strong choice if you want the wedge-shaped EZ Pass Mini/iPass to look cleaner and more discreet, while mounting it to your windshield without adhesive. Just be meticulous about compatibility, because the fit rules are specific, and suction-based mounting can require a little attention to placement for the best results.
FAQ
Does this fit all EZ Pass models?
No. It is designed for the wedge-shaped EZ Pass Mini/iPass (about 3.7 x 1.9 inches). It does not fit older/larger EZ Pass units, EZ Pass Flex with an HOV switch, or the newer rectangular EZ Pass model.
Is there adhesive that touches my windshield?
The system is meant to mount without adhesive touching your car. It uses a plastic holder with suction cups for windshield mounting, and includes interlocking strips to connect the silicone skin and holder.
How does the cover help?
The silicone skin wraps the transponder and gives it a more discreet all-black look. It also provides a finished, protected appearance while the pass is in the holder.
Will it stay attached while driving?
Review evidence indicates the holder stays mounted during normal driving, using suction cups. Suction performance can still depend on windshield conditions and placement, so you may need to set it up carefully.
Is it compact?
Yes, it is built to keep a compact profile. The kit is designed to avoid making the transponder setup significantly larger than the original, focusing instead on the all-black silicone wrap and a streamlined holder.
Specifications
| Product Title | IoT Slash EZ Pass Cover + Holder with Super-Strong Suction Cups. Compact All-Black Look Inside & Outside Your Windshield for Your E-Z Pass and I-Pass |
|---|---|
| Category | Automotive > Interior Accessories > Anti-Theft > Accessories |
| Brand | IoT Slash |
| Manufacturer | IoT Slash |
| Model Name | 19089097-f4f6-4b16-85ac-803115a91634 |
| Model Number | 19089097-f4f6-4b16-85ac-803115a91634 |
| Color | Black |
| Item Weight | 1.76 ounces |
| Compatible Devices | EZ Pass Mini/iPass |
| Mounting Type | Windshield |
| Additional Features | Compact, Lightweight |
| Compatible with Vehicle Type | Automobile |
| Enclosure Material | Plastic, Silicone |
| Mfr Part Number | EZ-Skin-Suction |
| Special Feature | Compact, Lightweight |
Recommended next
Faraday Box & 2 Pack Faraday Bag for Key Fob
A compact Faraday shielding kit designed to help block key fob signals when you lock up at home or keep keys secure on the go. Includes 1 metal-lock Faraday box for multiple keys and 2 Faraday pouches for separate, grab-and-go storage.
Samfolk Faraday Box with Faraday Bags for Car Keys, Car review
The Samfolk Faraday Box with Faraday Bags is a compact, wood-and-PU-leather styled signal-blocking case for keyless car fobs and other small valuables. Shoppers report it prevents cars from sensing fobs when stored inside, and it can also work with a matching Faraday pouch for on-the-go protection, with the main tradeoff being interior surface sensitivity and a tight, “stubborn” opening feel.
CARLOCK BT Vibration Sensor Add-on
The CARLOCK BT Vibration Sensor add-on expands a compatible CarLock system with door and motion vibration alerts. It pairs automatically, uses a replaceable battery (about 1 year), and can be mounted with tape or screws, but it is not meant for standalone use and sensitivity cannot be adjusted.
Simple Key, Key Fob and Key Programmer 3 Button Keypads, Key Replacement Remote Kit, Simple Key Programmer for Select Ford, Lincoln, Mercury, and Mazda Vehicles
The Car Keys Express “Simple Key” kit is a DIY keyless entry and transponder replacement option for select Ford, Lincoln, Mercury, and Mazda vehicles. It pairs a new 3-button (Lock, Unlock, Panic) key fob using an included EZ installer dongle, but you must first get the key cut by an automotive locksmith and you need at least one working remote to complete programming.