IFOOTAGE A400 Round Base Monopod Light Stand
Quick take
The IFOOTAGE A400 is a round-base monopod that doubles as a light stand, aimed at creators who need studio height without taking up the floor space of tripod legs. It adjusts from about 30.3 to 79.4 inches and is built from aluminum to handle up to a 22 lb payload for typical camera, lighting, and accessory setups. The biggest buying caveat is that it is a monopod-first design, so it is not the same stability style as a full 3-leg tripod for every scenario.
Pros and cons
Pros
- Space-saving round base helps you work in tighter studios and reduces trip hazards versus tripod legs.
- Quick height adjustment with quick-twist locks, reaching about 79.4 inches.
- Lighting and camera compatibility with included 1/4-inch and 3/8-inch screw adapters and a light adapter.
- Aluminum build designed for regular studio use, with a corrosion-resistant finish.
Cons
- Monopod format is specialized, so it may not replace a traditional tripod when maximum stance width matters.
- Limited review evidence on minor hardware quirks, including occasional loosening of small parts, so it is worth checking that mounting hardware stays snug for your setup.
What buyers think
Buyer-review evidence is strongly centered on one theme: the round base is genuinely different from a typical 3-leg footprint, and people report it makes studio layouts feel more open and less cluttered. Setup and height adjustment are also repeatedly described as straightforward, with locks that help the stand hold the position they set. Multiple reviews connect the design to everyday use cases, like mounting lights or cameras while working near desks or furniture, where tripod legs can get in the way.
There is also some limited-but-relevant feedback about small hardware behavior. For example, a couple of reviews mention minor issues such as a rubber piece around the base coming loose, and one mention that a top pin can sometimes loosen. These are not widespread enough in the available evidence to call them consistent defects, but they are good prompts to double-check fit and tightness as part of normal setup.
Design and build, focused on tight spaces
The A400 uses a round, flat base instead of tripod legs. For creators working in cramped rooms, that design choice is the point: it reduces the “splayed legs” footprint that can block traffic, interfere with other gear, or increase the chance of catching a toe when you move fast between takes. The base diameter is listed at about 15.75 inches, and the pole is designed to slide into tight working zones, including areas close to desks or furniture.
Construction is aluminum, intended to balance strength and portability for studio routines. The finish is described as corrosion-resistant, which matters if you are moving between locations or using the stand in environments where humidity and dust are realistic concerns.
Height range, locks, and payload capacity
Height is adjustable from roughly 30.3 inches to about 79.4 inches. Quick-twist locks are used for rapid height changes, which matters when you are switching between talking-head framing, over-the-shoulder angles, or raising a light to clear furniture and set more flattering angles.
For load expectations, the stand is rated to support up to 22 lb. That positions it well for common lighting tasks (LED panels, strobes with typical accessories) and many camera setups, but it is still worth treating the rating as a ceiling. If you regularly build heavy configurations or add counterweights for balance, you will want to account for the total mass and ensure everything is properly tightened before use.
Compatibility: screws, light adapter, and what you can mount
The A400 is designed to work with a variety of gear through included adapters. It provides a universal 3/8-inch screw and a 1/4-inch screw adapter, plus a light adapter. That combination is meant to cover popular mounting patterns for cameras and camcorders, microphones, fluid heads, and many video lights and projectors.
If your setup uses specialty heads, cages, or quick-release plates, confirm your mounting interface matches these screw standards, or that you can adapt cleanly without stacking parts in a way that reduces stability.
Pros and cons summary
Who it’s best for
- Studio creators with limited space who need light and camera height without tripod leg sprawl.
- Talking-head and content creators setting up near desks, bookcases, or other furniture where a wide tripod footprint is inconvenient.
- Users who frequently adjust framing and want quick, repeatable height changes.
Who should avoid it (or consider another option)
- Anyone needing maximum tripod-style stance width for the widest possible base support, especially in challenging environments.
- Users with mounting systems that do not align easily with 1/4-inch and 3/8-inch threads, unless you already have compatible adapters.
Verdict: a strong pick for compact studios
The IFOOTAGE A400 is best understood as a space-first monopod/light stand. If you like the idea of getting studio height while keeping your floor clear, the round-base design is the standout feature and is reflected directly in buyer feedback. If you regularly rely on a traditional tripod’s wide, three-leg stability, you may find yourself missing that stance, since this is built around a single-column approach.
If your main challenge is workflow and floor space, the A400 is a compelling option to evaluate, especially when you want quick height adjustments and flexible mounting via standard screw adapters.
Ready to check current availability and pricing? Buy on Amazon
FAQs
What height range does the IFOOTAGE A400 reach?
It adjusts from about 30.3 inches to about 79.4 inches.
How much weight can the monopod/light stand support?
It has a listed payload capacity of up to 22 lb.
Does it include mounting adapters?
Yes. It includes a universal 3/8-inch screw, a 1/4-inch screw adapter, and a light adapter for common camera and lighting mounting needs.
Is the round base good for small studios?
Buyer feedback points to the round base as a major advantage for tight spaces, since it reduces tripod leg footprint and trip hazards compared with traditional 3-leg stands.
Is this a replacement for a traditional tripod?
It can cover many studio lighting and monopod use cases, but it is still a monopod-first design. If you need the stability or stance width of a full tripod for your specific environment or setup, you may want to compare monopod versus tripod options before buying.
What kind of gear is it compatible with?
It is intended for cameras, camcorders, microphones, fluid heads, and video lights or projectors, as long as your mounting interfaces can be adapted with the included screw standards.
Specifications
| Product Title | IFOOTAGE A400 Round Base Monopod Light Stand - 79" Tripod for Light Aluminum Camera Floor Stand with 1/4'' & 3/8'' Screw/Light Adapter for Camera, Light, Webcam, Backdrop, Payload 22lb |
|---|---|
| Category | Electronics > Camera & Photo > Tripods & Monopods > Monopods |
| Brand | IFOOTAGE |
| Manufacturer | IFOOTAGE |
| Model Name | RB-A400 |
| Model Number | RB-400 |
| Color | Black |
| Material | Aluminum |
| Item Weight | 6.4 Kilograms |
| Item Length | 79.4 Inches |
| Unit Count | 1.0 Count |
| Manufacturer Part Number | MY-OEJV-90YN |
| Warranty Description | 2 |
| Built-In Media | Monopod |
| Maximum Height | 79.4 Inches |
| Minimum Height | 30.3 Inches |
| Leg Diameter | 15.75 inches |
| Compatible Devices | Camcorder, Camera, Smartphone |
| Features | Space-Saving, Tip-Resistant, Ultra Durable, Ultra stable |
| Weight Limit | 22 Pounds |
| Head Type | Ball Heads, Fluid Heads |
| Number of leg sections | 3 |
| Material Type | Aluminum |
| Audio Recording | No |
| Water Resistance Level | Not Water Resistant |
| Media Type | ProductImage |
| Viewfinder Type | LCD screen |
Available variants
Size
- A400-1 Pack
- A400-2 Pack
Recommended next
UURig Telescopic Selfie Stick Long with Tripod, Waterproof Hand Grip
A compact, telescopic selfie stick that can also function as a tripod for action cameras like GoPro and Insta360. Built with an aluminum frame for a sturdy feel, it offers 5-section height adjustment and includes mounting options geared toward common action-camera setups, with the main tradeoff being leg-opening effort for some users.
Floating Hand Grip Waterproof Monopod for GoPro Hero 13 12 11 10 9 8 7 6 5 4 3+ Session Black Silver Action Camera Handler & Handle Mount Accessories (Orange)
A compact waterproof GoPro floating hand grip that helps keep your action camera from sinking during snorkeling, scuba, and other water sports. It also includes a hollow handle compartment for small items or buoyancy tuning, and the grip connects directly for grab-and-shoot stability.
Waterproof Floating Hand Grip Compatible with GoPro Hero 12 11 10 9 8 7 6 5 4 3+ 2 1 Session Black Silver Camera Handler & Handle Mount Accessories Kit (Yellow)
A compact GoPro-style floating hand grip that helps keep your camera at the water surface, with a hollow handle that can be used for small item storage or to adjust buoyancy for underwater filming. Best for snorkeling, swimming, surfing, and other “grab-and-go” water shoots, with a key caveat: build and mount tightness can feel less confidence-inspiring for rough, high-impact conditions.
Waterproof Floating Hand Grip Compatible with GoPro Hero 12 11 review
A compact floating hand grip for GoPro-style action cameras that helps prevent accidental drops in water and adds a comfortable, steadier way to aim. It also includes a waterproof, hollow handle compartment you can use for small items or adjust buoyancy for underwater hovering, but build quality and mount tightness can be a concern for rougher, high-impact water sports.