I A S U S High Def XSound 4 Helmet Speakers
Quick take
The I A S U S XSound 4 are 45 mm, 3.5 mm in-helmet speakers aimed at riders who want clearer music and more noticeable bass without changing their comms setup too much. They emphasize more consistent speaker positioning using Acoustic Flex (AF) covers, but audio quality will depend on careful placement during install.
Pros and cons
Pros
- Full-range sound goal with solid bass and crisp highs (frequency response listed as 20 Hz to 20,000 Hz).
- Acoustic Flex (AF) cover design intended to help the speaker sit on the ear without extra pressure.
- Includes install aids such as 3M velcro stickers, foam spacers, foam covers, and an extension cable.
- Compact and light driver package (45 mm drivers in a thin aluminum chassis, listed at 34 g per unit).
Cons
- Only works with helmets/communications that provide a 3.5 mm earbud-style jack (not all Bluetooth comms have this).
- Installation and speaker alignment matter, and it can take time to dial in the best location.
- One reported issue is distortion on a single side, but evidence is limited.
What buyers think
Buyer feedback points to strong satisfaction with sound quality, especially bass presence and overall clarity compared with other helmet speaker sizes. Several riders mention the setup feels straightforward and that the speakers plug into common helmet comms using the 3.5 mm connection. The most consistent theme is that getting placement right can change the listening experience, which aligns with the brand’s focus on speaker positioning. Buyer-review evidence is mixed on tonal balance, including at least one report that mids can be weak, but most comments lean positive on low end impact and liveliness.
Who these helmet speakers are for
- Riders who want more noticeable bass from in-helmet speakers and are sensitive to “thin” or underpowered audio.
- People who will take installation seriously, especially positioning the speakers close to the ears for better volume and clarity.
- Shoppers with comms or media devices that have a 3.5 mm earbud jack, so the wiring stays simple.
Who should skip them
- If your motorcycle intercom does not use a 3.5 mm earbud-style jack, these speakers will not match your hardware.
- If you want a completely plug-and-forget upgrade, be prepared that alignment is a big part of the results.
- If you are chasing a specific tonal profile (for example, perfect mids at all volumes), note that listener reports are not perfectly uniform.
Key specs that matter for buying
Driver size and sound range
These use 45 mm dynamic drivers with a listed frequency range of 20 Hz to 20,000 Hz, which is the basis for the “full range” audio claim. In practice, several reviews highlight punchy bass and improved overall character versus other helmet speaker options.
Connection and compatibility
The XSound 4 uses a 3.5 mm audio pin. That means the biggest compatibility check is whether your comms system (or phone/media path) provides a 3.5 mm earbud-style female plug. If you are unsure, confirm the comms wiring interface before buying.
Fit and positioning design
A major differentiator is Acoustic Flex (AF) technology, which uses an ultra-soft, thin cover intended to mold to the ear’s shape without extra pressure. It is designed to keep the speaker positioned accurately even with the helmet shifting.
Included installation components
The kit includes 3M velcro stickers, foam spacers, foam covers, and an extension cable. This helps you secure and align the speakers, which is especially important because speaker placement can directly affect volume and clarity.
Installation reality check (what affects results)
Many helmet speaker upgrades live or die by placement. With these, the brand provides materials to help you align the speakers close to the ears, and buyers also emphasize using the helmet and cheek pad setup as a reference point for finding the speaker center. Plan on spending enough time to test-fit the location before finalizing the position.
Pros and cons in plain language
Pros
- Better in-helmet bass presence is a recurring positive theme.
- Sound clarity is the goal, backed by the listed frequency range and frequent buyer comparisons.
- AF cover approach focuses on comfort and consistent placement.
- Install kit is included, reducing the number of extra items you need to buy.
Cons
- Compatibility depends on your 3.5 mm jack.
- Placement work is required to get the best results.
- Tonal balance can vary by listener and volume, with limited evidence of midrange tradeoffs for some setups.
Verdict
The I A S U S XSound 4 are a strong choice for riders who have 3.5 mm earbud-jack compatible comms and want fuller, more satisfying in-helmet audio, particularly bass impact. If you are willing to invest time in speaker alignment, the AF cover design may help you get a more consistent fit. Skip them if your comms does not provide a 3.5 mm earbud-style connection, or if you need a no-effort upgrade with no placement considerations.
FAQ
- Are the I A S U S XSound 4 helmet speakers compatible with all motorcycle intercoms?No. They use a 3.5 mm audio pin and are intended for setups with a 3.5 mm earbud-style jack (female plug). If your comms does not have that type of connection, compatibility will be an issue.
- What makes these speakers different from other helmet speaker upgrades?The Acoustic Flex (AF) cover design is built to help the speaker sit on the ear with more consistent positioning, even as a helmet shifts. That positioning focus is meant to support clearer sound and better comfort.
- Is installation difficult?It is generally manageable, but placement is important. Plan time for fitment, because aligning the speaker center relative to the ear can affect volume and clarity.
- How good is the sound quality for music versus communications?Buyers commonly mention stronger bass presence and enjoyable overall sound character. Communications performance is typically part of the same audio path, but the biggest deciding factor is your device power and in-helmet fit.
Specifications
| Product Title | I A S U S High Def XSound 4 Helmet Speakers - Motorcycle Snowboard Helmet Speakers - Works with Most Comms with Earbud Ports – Includes Accessories for Install |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Audio & Video Accessories > Speaker Systems |
| Brand | I A S U S |
| Manufacturer | IASUS Concepts |
| Model Name | XSound Helmet Speakers |
| Model Number | IAXS4 |
| Color | Black with Matte Gold |
| Item Weight | 4 Ounces |
| Brand Name | I A S U S |
| Built-In Media | Helmet speakers, 3M velcro stickers, velcro spacers, extension cable |
| Age Range Description | Adult |
| Warranty Description | 1 year manufacturer limited warranty |
| Customer Package Type | Standard Packaging |
| Number of Items | 1 |
| Series Number | 4 |
| UPC | 639738992051 |
| Is Autographed | No |
| Headphones Ear Placement | Over Ear |
| Headphone Folding Features | closed-back |
| Earpiece Shape | rounded tip |
| Control Type | Media Control |
| Control Method | Remote |
| Noise Control | None |
| Audio Driver Type | Dynamic Driver |
| Audio Driver Size | 45 Millimeters |
| Frequency Range | 20 Hz - 20,000 Hz |
| Enclosure Material | Aluminum |
Recommended next
KSPEAKER Motorcycle Speakers Bluetooth Waterproof Radio Audio System Built-in Amplifier
The KSPEAKER K2CH is a 12V, bar-mount motorcycle speaker system built around a pair of 3-inch full-range metal speakers with Bluetooth music playback and FM radio. Buyers highlight easy plug-and-play install, simple controls, and clear sound you can still hear at highway speeds, with the main tradeoff being limited adjustability and fit/positioning challenges on crowded handlebars.
BOSS Audio Systems MCBK420B 3 Inch Motorcycle Speakers and 2 Channel Amplifier Package
The BOSS Audio Systems MCBK420B is a compact, weather-resistant Bluetooth motorcycle audio kit built around two 3-inch full-range speakers and an included Class D amplifier. It’s designed for handlebar mounting, offers both Bluetooth streaming and a 3.5 mm aux input, and includes an inline wired volume control. Expect a practical, trail-ready sound profile with limited bass, especially at higher speeds.
BOSS Audio Systems BRT26RGB IPX5 Weatherproof Bluetooth ATV Sound Bar
The BOSS Audio Systems BRT26RGB is a 26-inch, amplified ATV sound bar designed for handlebar/roll-bar mounting, with built-in Bluetooth (auto-reconnect), USB and aux input, RCA pre-amp outputs, and IPX5 weather resistance. Buyers highlight clear, punchy sound for everyday off-road use and bright RGB lighting, with the main tradeoff being that it is not meant to replace high-end car audio subwoofer systems.
JBL RallyBar S - 21" Bluetooth Universal Outdoor Vehicle Soundbar with Built-in 150w RMS Amplifier, IP66 Water & Dust Resistant (Black)
The JBL RallyBar S is a compact, outdoor-rated Bluetooth soundbar designed for UTVs, golf carts, boats, and other recreation vehicles. With a built-in 150W RMS amplifier, IP66 water and dust resistance, and flexible mounting, it’s a strong option for riders who want loud, bass-forward audio without a full stereo build. Biggest caveat: installation and mounting position can affect comfort and headroom, and the unit is meant for 9.6 to 16VDC vehicle power.