HS Saddle Type Cable Zip Tie Mounts Base Kit with Screw Hole, 6 Inch Nylon Cable Ties (100 pcs)
Quick take
This HS saddle-type zip tie mount kit combines screw-in cable tie bases with 6-inch nylon zip ties for tidier wiring runs on walls or desks. It is a good match for home networking and media cable organization when you prefer screw-in mounts instead of adhesive clips. The main thing to watch is mounting hardware compatibility, since there is at least some feedback about screws breaking in certain pre-drilled metal setups.
Pros and cons
Pros
- Screw-in saddle bases designed for a more secure hold than adhesive clips on many surfaces.
- Includes 6-inch nylon zip ties rated at 40 lb tensile strength, packaged with matching mounts and screws.
- Clear routing capacity, with mounts sized to accommodate typical Ethernet and under-desk cable bundles (max zip tie width 3/8”).
- Broad everyday use cases, from TV and Ethernet cable runs to light-duty organization projects.
Cons
- Not intended for drywall, which limits where you can install without extra hardware.
- Screws can be a weak point in some material choices or when drilling conditions do not match, so pre-install compatibility matters.
- If you need larger zip ties or much higher strength for heavy loads, this kit’s 6-inch, 40 lb spec may not be enough.
What buyers think
Buyer-review evidence for this kit centers on usability and neat cable results. Multiple comments highlight that the mounts are straightforward to install (screw in, then route the zip tie through), and that the system helps keep cable bundles looking clean, especially for structured cabling like Cat6. A small amount of feedback points to a hardware limitation, where screws broke partway through in at least one metal mounting scenario, even though the retainers and zip ties functioned once installed. Overall, reviews suggest the concept works well for tidy routing, but mounting conditions and screw suitability are important variables.
What this kit is for
These saddle-style bases are meant to act like anchor points for zip ties. After you screw the bases in place, the zip tie snaps through the saddle so you can cinch cables together and route them along a straight line. The kit is designed around a fairly common home setup pattern: organizing Ethernet, low-voltage media cables, and other thin-to-medium cable runs under desks, along joists, or around a TV/media wall.
Key specs that matter for buying
- Mounting method: Screw-in saddle bases (no adhesive).
- Included items: 100 zip tie mounts with screw hole, 100 zip ties, and 100 screws.
- Zip tie size: 6 inches (max bundle diameter up to 1.37 inches).
- Zip tie strength: 40 lb tensile strength rating.
- Compatibility limits: Designed for zip ties up to 3/8 inch width.
- Material: Nylon (nylon6/6 stated), black color.
Installation overview (and why it is simple)
Installation is a two-step workflow. First, you choose a location and screw the saddle bases into place, typically using about a 1 inch squared mounting area. Second, you feed the zip tie through the base and cinch your cables into a bundled bundle. The kit is built for installs where you want to avoid sticking clips to surfaces, and where you can spare the time to drill or screw into your chosen mounting points.
Who should buy this kit
- You want cleaner cable runs without adhesive: Screw-in mounts can be a better fit when you do not want peel-and-stick hardware.
- You are organizing Ethernet or small cable bundles: The 6-inch ties and the stated bundle diameter target typical home network cable grouping needs.
- You prefer a consistent, “track-like” routing line: Saddle bases help you keep ties evenly spaced for a tidy look.
- You want enough quantity for a small project: The 100-piece bundles cover multiple anchor points and cable ties.
Who should avoid or consider a different option
- If you need drywall installs: The product guidance excludes drywall, so you may need an alternative mount style or different anchors.
- If your mounting material is tricky: If you plan to screw into metal or other hard materials, double-check screw bite and pre-drilling approach. Some feedback suggests screws may not hold up well in certain setups.
- If your cable bundle is larger or heavier-duty: This kit is based around 6-inch, 40 lb ties, so very thick bundles or high-load tasks may require longer or higher-strength cable ties.
Pros and cons recap
Best fit: home network and media cable organization on walls, desks, joists, or other surfaces where you can screw in mounts and want a tidy, repeatable tie pattern. Main caveat: mounting hardware performance depends on the surface and drilling conditions, so test a small area before committing to a full run.
Alternatives to consider
- Adhesive wire clips: Choose this route if you cannot screw into your surface, but expect more limitation on permanence and surface compatibility (dust, paint texture, heat, and removal).
- Longer zip ties or higher tensile-rated ties: If you are managing thicker bundles or need more cinching force, moving to a larger tie size can be more practical than forcing thicker cables into a 6-inch setup.
- Different mounting base designs: If you cannot use screw-in saddles on your surface, look for alternative anchors that match your mounting constraints (especially for drywall).
Price and availability
Pricing and stock can change. If you want to confirm the latest cost and delivery details for the HS saddle-type kit, check the listing using the button below.
FAQs
How many cable tie mounts, zip ties, and screws are included?
The kit includes 100 cable tie mounts with screw holes, 100 zip ties, and 100 screws.
Are these mounts adhesive or screw-in?
They are screw-in mounts. The kit is designed to avoid adhesive mounting.
What zip tie size does this kit support?
It is designed for 6-inch zip ties, and the allowed maximum zip tie width is 3/8 inch.
Can I use the mounts on drywall?
Drywall is excluded. You should use a suitable mounting method or surface that matches the intended install guidance.
What kind of cables is this best for?
It is intended for everyday home cable organization, including Ethernet and other low-voltage cable runs like under-desk routing and media setups.
Specifications
| Product Title | HS Saddle Type Cable Zip Tie Mounts Base Kit with Screw Hole,Set Strong 6 Inch Nylon Cable Ties and Screws Each 100 PCS,Wire Clips Anchor Management Fastener for Baseborad,Wall or Desk,Black |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Ties |
| Brand | HS |
| Manufacturer | HUASU |
| Model Number | HSFS202 |
| Color | Black |
| Material | Nylon |
| Brand Name | HS |
| Manufacturer Part Number | HSFS202 |
| Unit Count | 300.0 Count |
| Item Type Name | screw in |
| Item Length | 6 Inches |
| Maximum Diameter | 1.37 Inches |
| Number of Pieces | 100 |
| Product Style | Zip |
| Material Type | Nylon |
| Tensile Strength | 40 Pounds |
| Style | Zip |
Recommended next
Cord Management Organizer Kit 4 Cable Sleeve split with 41Self Adhesive Cable Clips Holder, 10pcs and 2 Roll Self Adhesive tie and 100 Fastening Cable Ties
A multi-piece cable management kit that combines split cable sleeves, adhesive cable clips, and reusable ties for tidier desks, home offices, and AV setups. It is best for buyers who want a lot of organizer options in one box, but adhesion quality depends on surface smoothness and temperature.
HMROPE 100pcs Cable Zip Ties Heavy Duty 8 Inch, Premium
HMROPE 8-inch nylon zip ties (100-pack) are a budget-friendly option for home organization, bundling cables, and light-to-moderate outdoor fixes. They’re marketed as heavy duty with a 50 lb tensile strength claim, but buyer feedback suggests they’re best for temporary projects and not for long-term, extreme exposure or load-bearing use.
Zip Ties 12 inch, Black Zip Ties 100 pack, 40lb, Cable Ties, Self-locking Wire ties for indoor and outdoor use, by Tantti
A 100-pack of 12-inch black nylon cable ties rated for 40 lb tensile strength, built for both indoor and outdoor cable organization and quick fixes. Buyers like the self-locking hold and everyday reliability, with the main caveat being that they are better suited for “general purpose” bundling than ultra heavy-duty use.
Kable Kontrol Cable Zip Ties Black 5000 Pcs 18 Inch, 50 Lbs Tensile Strength
Kable Kontrol black nylon cable zip ties come in a large bulk quantity, with an 18-inch length and a 50 lb tensile strength rating. They are designed for indoor and outdoor use thanks to UV-resistant nylon 6-6, plus they have a smooth-and-grooved surface and self-locking head for a tighter hold on cables and small fixtures. If you need long, heavy-duty ties for weather-exposed bundling or light outdoor mounting, these are a practical option, but make sure 18 inches and the rated strength match your specific bundle size and use case.