Holicfun Rain Cover for Eufy SoloCam E30/E42 and 4G LTE Cam S330
Quick take
The Holicfun rain cover is designed to protect compatible Eufy SoloCam models (E30 and E42) and the Eufy 4G LTE Cam S330 from rain, snow, and UV exposure. It uses a matte black underside to reduce glare and a form-fitting ABS plastic shell that reviewers say installs cleanly. The biggest caveat is that it is not universal, so double-check you have the exact camera model before ordering.
Pros and cons
Pros
- Purpose-fit for Eufy SoloCam E30, E42, and Eufy 4G LTE Cam S330, with reviewers calling out a “made for Eufy” feel.
- Anti-glare design, matte black underside helps reduce harsh reflections and lens flare.
- Outdoor-focused protection against rain, snow, and UV rays.
- Easy installation approach, it slips on before solar panel attachment, with included mounting screws (and limited tape included for the 4G LTE model).
Cons
- Not universal, you may need to keep track of which cover matches which camera model.
- Installation steps can vary by model (screws versus added tape for the 4G LTE Cam S330), which can be slightly confusing if you have multiple cameras.
What buyers think
Buyer-review evidence is limited to a handful of snippets, but the recurring themes are clear: fit quality and coverage. Multiple reviewers report that the cover lines up well, covers the areas it should, and does not interfere where it should not. Reviewers also consistently describe the build as solid and the install process as straightforward. One common practical note is that labeling for compatibility could be better, since these covers are not universal.
Why this rain cover is a good match
If you run an outdoor Eufy camera in places with wet weather, the most important thing a rain cover can do is maintain a clean view of the lens while blocking direct precipitation and harsh sunlight. This Holicfun cover is built for specific compatible models, including:
- Eufy SoloCam E30
- Eufy SoloCam E42
- Eufy 4G LTE Cam S330
The “mini-umbrella” style shell is intended to shield the lens area from rain and snow while also helping protect against UV exposure. It is made from ABS plastic, which keeps the cover lightweight but still rigid enough to be used outdoors.
Anti-glare visor benefits for real-world video
Outdoor cameras often struggle with glare, especially when the sun is low or when surfaces reflect light back toward the lens. The underside of the cover is finished in matte black to reduce harsh light reflection and lens flare. In practical terms, that means the cover is not only about keeping water off, it is also about improving the odds of a clearer image when sunlight and rain overlap.
How installation works (and what to expect)
This cover is designed to be installed without drilling. The general approach is to place the cover on the camera before attaching the solar panel. For mounting, it includes a set of mounting screws for the SoloCam E30 and E42 models, while the 4G LTE Cam S330 configuration includes double-sided tape as part of the built-in media/accessory set, along with the rain cover and screws. If you own more than one compatible camera type, plan a moment to confirm you are using the right cover and the right attachment method for each model.
Pros and cons at a glance
Best for
- Owners of Eufy SoloCam E30, SoloCam E42, or Eufy 4G LTE Cam S330 who want dedicated rain and snow protection
- Buyers dealing with glare and lens flare in bright outdoor conditions
- People who prefer an accessory that installs without drilling
Consider before buying
- If you have a different Eufy camera model, it may not fit, so verify compatibility carefully.
- If you are swapping accessories between multiple cameras, you may want to keep the covers organized since they are not meant to be universal.
Verdict
The Holicfun rain cover is a strong fit for the Eufy SoloCam E30/E42 and Eufy 4G LTE Cam S330 owners who want straightforward outdoor weather protection plus glare reduction. The strongest buyer signals center on snug compatibility and easy installation, and the main downside is simply that you cannot treat it as a one-size-fits-all cover.
Want to check current pricing? Buy on Amazon
FAQ
Is the Holicfun rain cover universal?
No. It is designed for specific compatible models: Eufy SoloCam E30, Eufy SoloCam E42, and Eufy 4G LTE Cam S330. If you have a different camera model, you should verify fit before purchasing.
Does it include everything needed to install it?
It is designed for tool-free setup in the sense that it does not require drilling. It includes mounting accessories, including screws for the SoloCam E30/E42 versions, and tape is included as part of the accessory set for the 4G LTE Cam S330 configuration.
What protection does this cover provide?
The goal is to shield the camera from rain and snow while also helping protect from UV exposure. Its anti-glare design is meant to reduce harsh reflections that can contribute to lens flare and glare.
Will the anti-glare underside help with sunny conditions?
That is the intent. The underside is matte black to reduce light reflection and lens flare, which can improve clarity when sunlight is an issue.
How does it work with the solar panel?
The installation approach is to position the cover first and then attach the solar panel afterward, using the included mounting method for the specific camera model.
Who should avoid this rain cover?
If you own a different Eufy camera model outside the listed compatibilities, this cover is likely not the right choice since it is not universal.
Specifications
| Product Title | Holicfun Rain Cover for Eufy SoloCam E30/E42 and 4G LTE Cam S330 - Outdoor Weather Shield, Anti-Glare Sun Visor, Easy Installation |
|---|---|
| Category | Electronics > Camera & Photo > Accessories > Rain Covers |
| Brand | Holicfun |
| Manufacturer | Holicfun |
| Model Number | HF0428 |
| Color | White |
| Compatible Devices | Eufy 4G LTE Cam S330, Eufy SoloCam E30, Eufy SoloCam E42 |
| Form Factor | Cover |
| Additional Features | Lightweight |
| Water Resistance Level | Water Resistant |
| Shell Type | Hard |
| Enclosure Material | Plastic |
| Built-In Media | 1 x Double Sided Tape (for Eufy 4G LTE Cam S330), 1 x Rain Cover, 6 x Mounting Screws (for Eufy SoloCam E30/E42) |
| Unit Count | 1.0 Count |
| Mfr Part Number | HF0428 |
| Warranty Description | 1 year limited warranty |
Available variants
Model
- HF0428
- HF0392
Recommended next
Altura Photo Camera Rain Cover
The Altura Photo Camera Rain Cover is a waterproof nylon lens-jacket designed for DSLR and mirrorless bodies with longer lenses, featuring dual hand sleeves, a full-length double zipper, and a clear rear window for shooting in wet weather. It is a strong pick for light to moderate rain, snow, and salt spray, with a key limitation: it is sized for lenses up to about 8 inches, so very short “pancake” setups may not fit as well.
NEEWER Camera Rain Cover, M Medium Size Waterproof Raincoat Cover Sleeve for Canon Sony Nikon Fujifilm DSLR Camera & Lenses up to 200mm
The NEEWER M rain cover is a lightweight nylon sleeve designed to protect a DSLR or mirrorless camera and telephoto setup (up to a combined 200mm size). It’s reversible with a dual-sided camouflage look for wildlife shooters, and it uses touch fasteners for quick on/off. The main tradeoff: it’s effective for keeping gear covered in bad weather, but it can be bulky depending on how you pack and how you mount your lens.
OP/TECH USA Rainsleeve Camera Cover - Clear Rain & Dust Sleeve (2 Pack)
The OP/TECH USA Rainsleeve is a clear, foldable camera rain sleeve designed to keep DSLRs and compatible mirrorless bodies drier in rain, mist, dust, snow, and sand while still allowing viewfinder access. It works best for handheld or tripod shooting in “weather you didn’t plan for” moments, with the main tradeoff being fit and security around the lens hood and orientation.
Camera Rain Cover Sleeve Gear Camo for Canon EOS R5 review
This camo rain cover sleeve is designed to keep your camera and lens dry during wet, dusty, or salty outdoor shooting. It features a clear viewing window, dual adjustable sleeves, and a dual adjustable zipper setup for shooting handheld or on a tripod, with a key fit limit for lenses under about 13.38 inches.