GTSE Black Nylon Plastic Cable Clamps, 3/8" Screw Mounts (100 Pack)
Quick take
GTSE’s black nylon P-style clamps are screw-mounted cable management clips made to hold cables, rope, or tubing neatly in place. They’re corrosion-resistant (nylon 66, 94V-2) and sized for a maximum bundle diameter of 3/8" (9.5 mm). The main caveat is that you need to match the clamp size to your cable or tubing diameter for the best grip.
Pros and cons
Pros
- Strong nylon 66 construction intended for corrosion resistance and long-term use
- P-shaped design helps wrap and hold cables or tubing with reduced movement
- Easy to install with screws, bolts, or rivets for a clean, organized routing
- Designed for bundles up to 3/8" (9.5 mm)
Cons
- Only fits cables or tubing at or under the stated 3/8" max bundle diameter
- They require screwing or fastening, so they are not a “press-on” solution
What buyers think
Buyer-review evidence for this product points to consistent themes of easy installation and a neat, finished look for wiring and cable routing. Reviews also mention practical job-site and DIY use cases, including new construction electrical work and supporting temporary lighting runs. Overall, buyers describe the clamps as well made, strong, and good value, with only limited evidence that would clarify performance differences beyond general grip and durability.
What these cable clamps are for
These GTSE nylon cable clamps are designed to secure cables, rope, and tubing so they do not slip, sag, or tangle. The screw-mount P shape wraps around the bundle and is meant to reduce movement, which can also help minimize rubbing against surfaces over time.
They are a solid choice when you want routing to look intentional, especially for electrical cable management and straightforward projects where you can mount hardware along a run.
Key features that matter in real installs
Nylon construction and corrosion resistance
The clamps use nylon 66 and are rated 94V-2, with a stated temperature range of 40°F to +185°F. Nylon is also marketed as corrosion-resistant versus metal alternatives, which is relevant if your cable route is exposed to moisture or outdoor-adjacent conditions.
Size fit: max bundle diameter of 3/8"
The clamp is intended for bundles up to 3/8" (9.5 mm). If your cable, conduit, or tubing is larger, the clamp may not grip properly. If it’s much smaller, it may feel loose depending on how your bundle sits inside the P-shaped opening.
Fast mounting style
Installation is straightforward because the clamps are screw-mount style, so you can use screws, bolts, or rivets based on your mounting surface. Once fastened, the design is meant to maintain its shape for stable routing without needing constant readjustment.
Neater-looking cable management
Because these are individual clamps along a run, they help create a cleaner, more organized appearance than loose ties alone. That matters for finished spaces and for projects where you want the route to look “trimmed out.”
Pros and cons for different buyers
Best for
- Home DIYers and electricians who want tidy routing for cables, rope, or tubing
- Projects where you can fasten clamps along a run using screws, bolts, or rivets
- Anyone prioritizing corrosion resistance and a stable hold from a nylon clip
Who should avoid
- Buyers who need a different size than 3/8" max bundle diameter
- People looking for a no-drill or press-on mounting method
Price and availability
The pack contains 100 clamps and is positioned as a value option for cable management projects where you want enough clips for a typical run or multiple areas. Check the latest price to confirm it still makes sense for your quantity needs.
Is it worth it?
It’s worth considering if your priority is neat, consistent cable routing with a screw-mounted nylon clamp designed to resist corrosion and hold bundles up to 3/8". The biggest deciding factor is sizing, so measure your cable or tubing diameter first to avoid a loose fit. If you need a faster mounting method or a different bundle size, you may want to look for another style or clamp diameter.
FAQs
What size cable or tubing do these clamps fit?They are intended for a maximum bundle diameter of 3/8" (9.5 mm). Measure your cable or tubing to confirm it falls within that range.
How do you install GTSE nylon cable clamps?They are screw-mount style, so you fasten them using screws, bolts, or rivets depending on the mounting surface.
Are these clamps resistant to corrosion?The clamps are made from nylon 66 and are marketed as corrosion-resistant (and not prone to rust like metal clips), which can help for long-term installations.
What temperature range are the clamps rated for?The stated operating temperature range is 40°F to +185°F.
Can these be used for rope or tubing, or only cables?They are designed for cable, rope, and tube management, so they can be used beyond just electrical wiring as long as the bundle fits the 3/8" max diameter.
Bottom line
GTSE’s black nylon plastic cable clamps are a straightforward, screw-mounted solution for keeping wires, rope, and tubing neatly in place. They have the right ingredients for corrosion resistance and a stable grip, and buyers consistently highlight the “trimmed out” look and ease of use. Just make sure you choose the correct clamp size for your cable or tubing diameter.
Specifications
| Product Title | GTSE Black Nylon Plastic Cable Clamps, 3/8" Screw Mounts for Cable, Rope, Tube Management, 100 Pack |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Straps |
| Brand | GTSE |
| Manufacturer | GTSE |
| Color | Black |
| Material | Nylon |
| Item Weight | 2.1 Ounces |
| Brand Name | GTSE |
| Manufacturer Part Number | GTSEPC95B |
| Item Dimensions | 0.48 x 0.48 x 1.05 inches |
| Material Type | Nylon |
| Style Name | Modern |
| Item dimensions L x W x H | 0.48 x 0.48 x 1.05 inches |
| Style | Modern |
| Number of Items | 100 |
Available variants
Color
- White/Natural
- Black
Size
- 1/2" Diameter
- 1/4" Diameter
- 3/16" Diameter
- 5/16" Diameter
- 3/8" Diameter
Recommended next
Heavy-Duty Wrap-It Storage Straps - Assorted 6-Pack
The Heavy-Duty Wrap-It Storage Straps (assorted 6-pack) are a simple, strong way to bundle and hang extension cords, hoses, and shop tools. With multiple strap sizes, a stainless steel grommet, and a hook-and-loop closure rated for up to 50 lbs, they’re a good fit for garages, sheds, and some vehicle mounting ideas, with the main tradeoff being that you need the right mounting setup.
STEREN Coaxial Cable Clips (100 Pack, Black)
STEREN’s coaxial cable clips are screw-in wire clamps designed to hold RG6 style coax securely and help reduce stress on the line. The 100-pack is geared toward clean routing for antennas, TV mounts, and other low-voltage cable runs, with a fit that can expand thanks to the clip “teeth.” Main caveat: they are intended for screw installation, and the hold depends on using the right surface (works better on wood than masonry).
AGPTEK Ethernet Cable Clips, 100 PCS Adhesive Wire Clips, Flat Cord Clips Small Cable Holder Management for Home Wall Flat Ethernet Network Cord Organizer, Decoration Fairy Light Sticky Hooks, White
AGPTEK’s 100-pack adhesive cable clips are designed for tidy routing of small flat cables like Ethernet and lightweight cords like chargers and LED light wiring. They’re quick to install on clean surfaces and, for most buyers, hold well without constant re-positioning, with a key caveat: adhesion depends heavily on surface prep and can be hit-or-miss on certain textures.
16Ft x 1In Adjustable Cable Straps with 25 Buckles, Free Cut Length, Black Reusable Fastening Cable Ties, Hook and Loop Securing Strap for Cable Tidy, Wire Management, Cord Organiser, Black
These cut-to-length nylon hook-and-loop cable straps let you bundle cords and gear with reusable fastening. With 25 buckles and an adjustable setup, they’re a practical option for tidy cable management indoors and outdoors, though very large bundles may need multiple straps.