Gonifeto Radar Detector Power Cord Adapter (10Pin Type-C) for Select Jeep, Dodge, Chrysler
Quick take
This Gonifeto radar detector power cord adapter is built for a cleaner installation on select Jeep, Dodge, and Chrysler vehicles that use an auto-dimming rearview mirror 10-pin plug. It combines radar detector charging cables (RJ11 and DC3.5) with a built-in USB buck module so you can power more than just the detector, but the biggest deciding factor is whether your vehicle’s mirror connector and trim match the intended wiring setup.
Pros and cons
Pros
- Designed for a “plug and play” style setup using the auto-dimming rearview mirror 10-pin connection.
- Includes both RJ11 and DC3.5 radar detector cable types, covering a broad range of common detector power inputs.
- Built-in USB buck module output (rated for continuous operation at 5V 2A) for powering other accessories.
- Buyer feedback commonly highlights easy install and a tidier look with fewer visible dangling wires.
Cons
- Compatibility depends on your exact vehicle and whether your mirror uses the expected 10-pin port and wiring style.
- If the fitment is off, you may end up with an adapter you cannot use with your specific setup.
- It’s intended for powering radar detectors, not for installing a detector mount or setting up the detector itself.
What buyers think
Buyer-review evidence is limited but generally consistent on the core experience: the adapter is described as easy to install, with a common theme of cleaner cable management because it routes power through the mirror connection rather than requiring additional hardwiring. Several buyers also mention it working smoothly with dashcam and other accessories, aligning with the included USB power option. Overall, the review evidence points to strong usability when it fits correctly, but fitment checking matters.
How this adapter powers your radar detector (and what’s included)
This is a vehicle-to-detector power adapter meant to connect to the auto-dimming rearview mirror 10-pin plug and provide an output suitable for radar detector power cables.
Key connection approach
- Plug the adapter’s compatible connector into the vehicle’s auto-dimming rearview mirror 10-pin port.
- Use the included radar detector power cables to connect to your specific detector input type.
- Use the included USB buck output to power other accessories (such as dashcam or GPS), depending on your needs.
Included radar detector cables
The adapter includes both RJ11 and DC3.5 radar detector charging cables. That matters because many popular detectors use different power input standards, so having both cable types increases the chance you will find a match without needing to source a separate cable.
Vehicle compatibility, the real deciding factor
This adapter is intended for select Jeep, Dodge, and Chrysler vehicles equipped with an auto-dimming rearview mirror and a compatible 10-pin connection. Fitment coverage includes several model lines and ranges, but there’s an important practical takeaway: you should confirm your exact vehicle and mirror connector port before buying.
Buyer-friendly fitment checklist: verify you have the auto-dimming rearview mirror style, confirm your mirror uses a 10-pin plug, and compare your vehicle’s model year and trim to the supported list. If you are between configurations, contacting the seller for help can save time.
Built-in USB buck module for additional accessories
A standout feature is the built-in USB buck module output, which is rated for continuous operation at 5V 2A. For buyers running a radar detector plus something like a dashcam or GPS, this can reduce clutter by keeping both detector and accessory power tied into the same cleaner routing path through the mirror connection.
Pros and cons in practical terms
When it’s a smart choice
- You want to avoid hardwiring and prefer routing power through the mirror connection for a cleaner dash.
- Your radar detector uses an RJ11 or DC3.5 style power input (since both cable types are included).
- You plan to power additional accessories, and a 5V USB output would help simplify your setup.
- You drive a supported Jeep, Dodge, or Chrysler model with the correct auto-dimming mirror 10-pin connection.
When you should be cautious
- Your vehicle’s mirror wiring or connector type may differ from the adapter’s supported configuration.
- You need guaranteed fitment but cannot confirm the 10-pin port type beforehand.
- You are looking for a general-purpose universal hardwire solution, because this adapter is designed for a specific mirror connection approach.
Is it worth it?
The Gonifeto adapter is worth considering if you specifically want a clean, plug-in radar detector power setup on a compatible Jeep, Dodge, or Chrysler with an auto-dimming rearview mirror 10-pin connection. The included RJ11 and DC3.5 cables and the built-in USB output make it convenient for multi-device setups. If you cannot confidently verify mirror connector compatibility for your exact vehicle configuration, the risk of mismatch is the main downside to factor into your decision.
FAQ
Will this work with any radar detector?
No. It’s designed for radar detectors that can use RJ11 and/or DC3.5 power cable types. You should confirm your detector’s power input compatibility, then confirm vehicle mirror connector compatibility.
What vehicles is this adapter compatible with?
It’s intended for select Jeep, Dodge, and Chrysler models with an auto-dimming rearview mirror and a compatible 10-pin connection. Because fitment depends on exact configurations, confirm your mirror port (10-pin) and vehicle range before purchasing.
Does it require hardwiring?
The intended install approach is plug and play using the auto-dimming rearview mirror 10-pin connection, rather than hardwiring the vehicle’s wiring harness.
Does it also power other accessories?
Yes. It includes a built-in USB buck module output rated for continuous operation at 5V 2A, which can be used to power other accessories such as dashcam or GPS (depending on their power requirements).
What’s the biggest reason this might not fit?
Vehicle-specific mirror connector and wiring differences. If your rearview mirror uses a different port type or wiring style than expected, the included setup may not connect the way you need.
Specifications
| Product Title | Radar Detector Power Cord Adapter,(10Pin Type-C) Compatible with Jeep Grand Cherokee,Dodge,Chrysler with Auto Dimming Rearview Mirror,RJ11 DC3.5 Radar Detectors Charger Cable,Clean Install |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Radar Detectors |
| Brand | Gonifeto |
| Manufacturer | Liaochengshi Zebao Dianzishangwu Youxiangongsi |
| Model Number | YXX-Adapter13 |
| Color | Black |
| Compatible Devices | Radar Detector |
| Connector Type | RJ11 |
| Number of Ports | 1 |
| Input Voltage | 5 Volts (DC) |
| Power Plug Type | No Plug |
| Nominal Power | 10 Watts |
| Smart Home Compatibility | Not Smart Home Compatible |
| Package Quantity | 1 |
| Unit Count | 1.0 Count |
| Number of Items | 1 |
| UPC | 743785318228 |
| Mfr Part Number | YXX-Adapter13 |
Recommended next
Uniden R7 Extreme Long-Range Laser-Radar Detector, Built-in GPS w/ Real-Time Alerts
The Uniden R7 is a long-range radar/laser detector built around dual front-and-rear antennas, directional arrows, and a large OLED display. Built-in GPS supports red-light/speed camera alerts plus GPS-based muting of repeat false alerts, but the device isn’t “set it and forget it”, it typically needs tuning for quieter day-to-day use.
Uniden DFR7 Super Long Range Wide Band Laser/Radar Detector, Built-in GPS w/Mute Memory, Voice Alerts, Red Light & Speed Camera Alerts, OLED Display, Black
The Uniden DFR7 is a wide-band radar and laser detector with built-in GPS, route-based mute memory, voice alerts, and a bright OLED display. It’s designed to reduce repeat false alerts and includes preloaded red light and speed camera locations with firmware updates, which matters if you do a lot of driving near automated enforcement. The tradeoff: settings and band behavior can require some dialing in, especially in areas heavy with K-band sources like automatic doors.
Garmin Varia RTL515, Cycling Rearview Radar with Tail Light
The Garmin Varia RTL515 combines a rearview radar and a built-in tail light to alert you to approaching vehicles from behind up to 153 yards away. It’s a strong safety add-on for cyclists who want earlier, clearer “what’s behind me” awareness, especially when you merge or ride on quieter roads, with battery life rated up to 16 hours (day flash mode) and up to 6 hours (solid).
UNIDEN R8 Extreme Long-Range Radar/Laser Detector, Dual-Antennas Front & Rear review
The Uniden R8 is a long-range radar/laser detector built around dual antennas with directional arrows, built-in GPS alerts (including red-light and speed-camera databases), and programmable voice announcements. It’s especially compelling for frequent drivers who want fewer repeat false alarms thanks to GPS-based muting and memory features, with a large OLED display for at-a-glance situational awareness.