GoHawk Motorcycle Speakers Bluetooth, Waterproof Motorcycle Audio System Built-in Amplifier, FM Radio, AUX Input, USB - Universal Fit for 7/8" to 1.25" Handlebar
Quick take
GoHawk’s handlebar speaker system combines a built-in amplifier with Bluetooth, FM radio, AUX, and USB playback in a waterproof, vibration-resistant design. It is best for riders who want simple controls and versatile audio options for casual listening, but louder highway environments and full-face helmets can make it harder to hear clearly.
Pros and cons
Pros
- Built-in Class-AB amplifier, so you do not need a separate amp to power the speakers.
- Flexible listening sources: Bluetooth 5.0, AUX input, FM radio, and USB (single USB 2.0 port).
- Waterproof housing designed to handle rain, sun exposure, dust, and vibration.
- Universal handlebar clamp fit for 7/8 in to 1.25 in bars, with tool-free style installation hardware.
Cons
- Sound level and bass can feel limited at higher speeds, with some riders reporting it is difficult to hear on the highway with a full helmet.
- Audio expectations should be “ride soundtrack,” not “window-rattling” volume, compared with bigger full fairing stereo setups.
- Battery drain concerns have been reported when wiring the ignition/power lead incorrectly, so installation details matter.
What buyers think
Buyer feedback is mixed on loudness, but the overall theme is that this system can sound notably better than having no audio at all, especially for cruising and lower-noise conditions. Several buyers describe the sound quality as clear enough to actually enjoy music while riding once the system is installed correctly, while others emphasize that it may not be loud or deep enough for highway speed listening. There are also recurring notes about radio reception, with antenna placement affecting signal quality. Overall, buyer-review evidence suggests the main deciding factor is whether you need clear audio at faster speeds in a loud helmet environment.
What this system is (and what it is not)
This is an all-in-one motorcycle speaker kit built around two 8-inch speakers, aluminum housing, and a built-in Class-AB amplifier. That design choice is aimed at simplifying installation, since you are not building an entire audio stack from scratch. It supports multiple sources (Bluetooth, FM, AUX, and USB) so you can switch between phone streaming, wired devices, live radio, or files on a flash drive.
What it is not is a high-output, full-fairing audio replacement intended for maximum volume in the loudest riding conditions. Reviews frequently point to a practical ceiling in highway noise, so the “worth it” question depends on your speed, helmet type, and how loudly your bike already runs.
Key features that affect real riding use
Bluetooth 5.0 for phone audio
The system uses Bluetooth 5.0 with a stated range up to 15 meters (about 50 feet). In practice, stable connection is usually influenced by mounting location and how much interference is around the bars and wiring, but the feature set is convenient for everyday use.
FM radio, with antenna placement mattering
FM radio is included for live audio while you ride. Buyer feedback highlights that reception quality can be distorted if the antenna wiring is routed poorly or bundled with other electrical wiring. If radio is a priority, plan a clean antenna route.
AUX and USB for non-Bluetooth options
An AUX input supports 3.5 mm-style wired listening, which can be useful if you want direct control or an alternative to Bluetooth. There is also a USB port for playback from flash drives, with a note that the unit has been described as playing MP3 files. If your library is in a different format, confirm compatibility before you rely on USB.
On-speaker push-button controls
Volume and track control are handled with push buttons on the speaker housing. That design helps avoid reaching for your phone while moving, but it also means the controls are not as flexible as a full touchscreen or app-based interface.
Waterproof and vibration-focused housing
For day-to-day riding, the waterproof rating and vibration-focused clamp mounting are the big durability story. The aluminum enclosure and weather-oriented design are meant to keep the system functioning through rain, dust, and the bumps you get on the road.
Pros and cons in plain language
Who it’s best for
- Riders who want an easier upgrade that includes an amplifier built in.
- People who ride primarily in cruising conditions and want music you can enjoy, not necessarily music you can hear over everything at highway speeds.
- Shoppers who want multiple inputs (Bluetooth, AUX, FM, USB) and simple bar-mounted controls.
- Anyone with 7/8 in to 1.25 in handlebars (or compatible mounting options) looking for a universal fit.
Who should avoid it (or shop more carefully)
- If you consistently ride at highway speed with a full-face helmet and need clearly intelligible audio at all times, you may find the output underwhelming.
- If you want the kind of bass impact associated with bigger, more powerful motorcycle audio systems, this setup may feel “okay” rather than immersive.
- If you are not comfortable with basic automotive electrical wiring, the power lead and ignition behavior could be a frustration point.
Installation and setup tips that can make or break the experience
- Plan your wiring and power behavior: some buyers report battery drain if the wiring is set up in a way that keeps the unit drawing power even when it should be off. Using the correct ignition or switched power source matters.
- Mind the antenna route: for FM reception, avoid routing the antenna where it can pick up interference from other electrical wires.
- Mount stability matters: clamp fit and tight mounting reduce vibration and can help keep audio consistent.
Verdict
The GoHawk system is a practical motorcycle audio upgrade if you want built-in amplification, weather-ready handlebar speakers, and multiple playback options in a relatively compact package. Buy it if your goal is enjoyable background music while cruising. If your top requirement is clearly hearing music at highway speed in loud conditions, consider spending more time comparing output and rider-hearing expectations across higher-end speaker systems.
Compare it by what you care about
If Bluetooth and controls are your priority
Choose systems like this that combine Bluetooth with handlebar-accessible controls. The key is whether the speaker output matches your typical noise level.
If FM radio matters
Look for designs that include an antenna and pay attention to installation notes, since routing can affect reception.
If you prefer USB or wired audio
Confirm USB playback format support before relying on flash drives. Systems that support more formats can be more convenient for larger libraries.
FAQ
Will I be able to hear the speakers on the highway?Buyer feedback suggests highway clarity can be hit or miss, especially with full-face helmets and typical road noise. For many riders, the audio is enjoyable at cruising speeds, but some report it is harder to hear at higher speeds.
Does the system need an external amplifier?No. It is designed with a built-in Class-AB amplifier, which simplifies installation compared with setups that require adding an amp.
Is it waterproof, and will it handle rain and vibration?It is marketed as waterproof and built with a durable housing intended to handle rain, sun, dust, and vibration.
Can I use FM radio while riding?Yes. FM radio is included, but reception can depend on antenna placement and wiring routing to avoid interference.
What audio sources are supported?You can use Bluetooth, AUX input, FM radio, and a USB port for playback from flash drives.
Will USB play my music files?This system is described by reviewers as playing MP3s via USB. If your files are in other formats, verify compatibility before relying on USB playback.
What handlebars does it fit?It is designed for universal mounting on 7/8 in to 1.25 in handlebars.
Specifications
| Product Title | GoHawk Motorcycle Speakers Bluetooth, Waterproof Motorcycle Audio System Built-in Amplifier, FM Radio, AUX Input, USB - Universal Fit for 7/8" to 1.25" Handlebar |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Audio & Video Accessories > Speaker Systems |
| Brand | GoHawk |
| Manufacturer | GoHawk |
| Model Name | RD8 Gen. 2 |
| Model Number | RD8 Black |
| Color | Black |
| Item Weight | 1.5 Pounds |
| Audio Output Mode | Stereo |
| Mounting Type | Handlebar Mount |
| Enclosure Material | Metal |
| Speaker Type | Outdoor |
| Additional Features | Display, USB Port, Waterproof |
| Antenna Location | For Music Players |
| Is Waterproof | True |
| Warranty Type | Limited |
| Maximum Range | 15 Meters |
| Control Method | Push Button |
| Speaker Size | 8 Inches |
| Woofer Diameter | 8.25 Inches |
| Water Resistance Level | Waterproof |
| Bluetooth Range | 15 Meters |
| Audio Latency | 16 Milliseconds |
| Specific Uses For Product | Pro Audio |
| MP3 player | No |
| Controller Type | Battery Powered |
| Total USB 2.0 Ports | 1 |
Recommended next
Pyle 2-Way Dual Waterproof Off-Road Speakers, 4 Inch 800 Watt Marine Grade Wakeboard Tower Speakers System, Full Range Outdoor Audio Stereo Speaker for ATV, UTV, Quad, Jeep, Boat (PLUTV41BK)
Pyle’s PLUTV41BK is a compact 4-inch, 2-way passive off-road speaker set built for outdoor use. It delivers stereo sound for ATVs, UTVs, and marine applications, with an IP-X5 waterproof rating and a roll-bar style mounting approach, but installation fit and mounting tightness can vary by vehicle.
GoHawk Motorcycle Speakers and Amplifier Audio Sound System (1000W)
A weatherproof, 4-speaker, 1000W-style off-road audio system built for ATV, UTV, quad, and similar rides. It pairs Bluetooth with AUX, USB/SD (MP3), and FM, plus a wired volume control for day or night handling. Best for riders who want louder outdoor audio without a complicated install, with the main caveats being mounting angle limits and wiring/bracket durability concerns.
BOSS Audio Systems MCBK420B 3 Inch Motorcycle Speakers and 2 Channel Amplifier Package
The BOSS Audio Systems MCBK420B is a compact, weather-resistant Bluetooth motorcycle audio kit built around two 3-inch full-range speakers and an included Class D amplifier. It’s designed for handlebar mounting, offers both Bluetooth streaming and a 3.5 mm aux input, and includes an inline wired volume control. Expect a practical, trail-ready sound profile with limited bass, especially at higher speeds.
BOSS Audio Systems BRT26RGB IPX5 Weatherproof Bluetooth ATV Sound Bar
The BOSS Audio Systems BRT26RGB is a 26-inch, amplified ATV sound bar designed for handlebar/roll-bar mounting, with built-in Bluetooth (auto-reconnect), USB and aux input, RCA pre-amp outputs, and IPX5 weather resistance. Buyers highlight clear, punchy sound for everyday off-road use and bright RGB lighting, with the main tradeoff being that it is not meant to replace high-end car audio subwoofer systems.