Garmin GMS 10 Network Port Expander (Network Device) (010-00351-00)
Quick take
The Garmin GMS 10 Network Port Expander adds extra wired connectivity for Garmin chartplotters and marine sensors using the Garmin marine network, using RJ45 connections and up to 100 Mbps data transfer. It’s a practical upgrade when you need to connect multiple MFDs and peripherals without cobbling together an unofficial network setup, but it will only help if your existing devices are compatible with Garmin’s marine networking approach.
Pros and cons
Pros
- Expands a Garmin marine network so multiple Garmin displays and sensors can share the same network.
- Uses RJ45 networking and supports 100 Mbps data transfer (aimed at fast, responsive chartplotter communication).
- Designed for plug-and-play detection, reducing setup complexity when you add new devices.
- Compact, purpose-built marine device with multiple network ports for growth.
Cons
- Not a universal “any brand” hub. If your devices do not communicate correctly on the Garmin marine network, you may still need to adjust expectations or system wiring.
- Physical size and included cable details may be less convenient in tight installations.
What buyers think
Buyer-review evidence is strongly positive on the core use case: adding a second Garmin MFD or expanding an all-Garmin electronics stack so devices can communicate. Many users describe installation as easy and report that connected units exchange data quickly, with setup working smoothly once powered and wired. A smaller amount of feedback suggests that some device pairings may not communicate as expected across models, which reinforces that compatibility matters. Overall, reviews align on reliability for day-to-day networked operation after setup, and they highlight the value of having a dedicated Garmin network expander rather than building a DIY equivalent.
What the Garmin GMS 10 network port expander is for
The GMS 10 is meant to expand your boat’s Garmin marine network when you run out of available network ports behind chartplotters and when you want a clean, centralized way to connect multiple networked peripherals. If you are building a multi-display setup, adding radar, live sonar, or other network-capable devices, or simply want more RJ45 connection points, this unit provides the extra “room” on Garmin’s network layer.
Key specifications that matter in real installs
Network speed and connection type
It uses RJ45 and is rated for 100 megabits per second data transfer. For Garmin systems, that is intended to support quick chartplotter-to-peripheral communication when you are sharing data across multiple displays.
Designed for the Garmin marine network
The expander is built around Garmin’s marine network approach, so it focuses on connecting multiple multi-functional displays (MFDs) and compatible sensors. Practically, this means you should confirm that your existing and planned gear is meant to work with the Garmin marine network ecosystem.
Ports and expansion
It’s an expander with multiple network ports (the listing shows 8 network ports). That gives you headroom as your system grows, whether you are adding a second chartplotter or integrating more accessories into the same onboard networking structure.
Installation and day-to-day usability
Reviews frequently mention plug-and-play behavior, with connected devices automatically detected once everything is powered and connected. Mounting and wiring are typically straightforward, but one practical tradeoff shows up in feedback: the cable hardware and overall unit footprint can be a little bulky or finicky in very tight mounting spaces. If your console or panel area is crowded, plan your cable routing and mounting location ahead of time so you are not fighting clearance.
Pros and cons for different boat setups
Best for
- Owners adding a second (or additional) Garmin MFD to an existing Garmin marine network.
- Anyone who wants a purpose-built, Garmin-network-specific way to expand wired connectivity for networked marine electronics.
- Systems where multiple chartplotters and compatible sensors need to share data reliably.
Who should be careful or consider alternatives
- If your plan includes non-networked devices or equipment that is not intended to work through Garmin’s marine networking method, this expander may not solve your connectivity goals.
- If your install space is extremely tight, pay attention to physical size and cable hardware, since some buyers found details to be a bit of a pain compared with simpler cable terminations.
Is it worth it?
If you are already invested in Garmin marine networking and you need additional RJ45 port capacity for multiple MFDs and compatible sensors, the GMS 10 is a clean, purpose-built way to expand your system. The strongest buying signal from reviews is that it tends to “just work” when the device ecosystem is correct, reducing the friction of adding more displays to an existing boat network. The main reason it might disappoint is mismatched compatibility, such as expecting communication between devices that do not share the same Garmin marine networking behavior.
Quick comparison approach (no direct model-to-model matchup)
If you’re deciding between this expander and other “networking hub” ideas, focus on three questions: (1) Are all your target devices meant to work on the Garmin marine network? (2) Do you need Garmin-specific plug-and-play detection rather than configuring something more manual? (3) Are you optimizing for simplicity and integration quality over saving money? The GMS 10 is most compelling when you answer “yes” to Garmin-network compatibility and “yes” to wanting an easier integration path.
Price and availability
Pricing can vary by seller, and availability may fluctuate. For the most current price and stock status for the Garmin GMS 10 Network Port Expander (010-00351-00), check the listing below.
FAQs
Is the Garmin GMS 10 compatible with all marine electronics?
It is designed for use with the Garmin marine network. For best results, confirm that your chartplotters and sensors are intended to communicate over the Garmin marine networking ecosystem.
Does it require configuration, or is it plug-and-play?
It is designed for plug-and-play behavior, with connected Garmin network peripherals detected once the unit is powered and wired into the marine network.
What connection type does the GMS 10 use?
It uses RJ45 networking connections.
What data transfer speed does it support?
It is rated for 100 megabits per second.
Will it help if my devices are not communicating through the marine network?
It expands ports on the Garmin marine network, but it does not guarantee that every combination of devices will communicate. If specific devices are not compatible with each other through Garmin marine networking, you may need to review system compatibility and wiring.
How many ports does it provide?
The listing shows 8 network ports.
Specifications
| Product Title | Garmin GMS 10 Network Port Expander (Network Device) (010-00351-00) |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Marine Electronics > Marine GPS Chartplotters |
| Brand | Garmin |
| Manufacturer | Garmin |
| Model Number | 010-00351-00 |
| Color | Black |
| Item Weight | 1 Pounds |
| Number of Ports | 8 |
| Compatible Devices | Desktop |
| Interface | RJ45 |
| Data Transfer Rate | 100 Megabits Per Second |
| Switch Type | Managed |
| Platform | Not Machine Specific |
| Item Dimensions L x W x H | 7.3"L x 2.2"W x 6.7"H |
| Built-In Media | Garmin GMS 10 Network Port Expander |
| Warranty Description | Warranty |
| Global Trade Identification Number | 00753759045524 |
| UPC | 600905285962 892871083455 753759045524 737490674120 069060193336 014445622963 |
| Mfr Part Number | 010-00351-00 |
| Item Type Name | Garmin GMS 10 Network Port Expander |
| Unit Count | 1.0 Count |
| Included Components | Garmin GMS 10 Network Port Expander |
Available variants
Style
- Expander
Product Packaging
- Standard Packaging
Recommended next
Garmin ECHOMAP UHD2 94sv with GT56 Transducer, 9" Touchscreen Chartplotter, Garmin Navionics+ U.S. Coastal
The Garmin ECHOMAP UHD2 94sv is a 9-inch touchscreen chartplotter built for clear, easy on-the-water navigation plus detailed scanning sonar with the included GT56 transducer. It pairs built-in Navionics+ coastal charts with Wi-Fi sharing and multi-band GPS for more reliable positioning. The main tradeoff is that you will want a compatible sonar and network setup (and the right boat space for mounting) to fully benefit from its connectivity features.
Humminbird ICE Transducer with Dual Beam Sonar – XI 9 20
A dedicated ice-fishing sonar transducer for Humminbird units that converts many non-CHIRP setups into hardwater sonar. It’s built for proper positioning in an ice hole and delivers two sonar beam angles for detail and coverage, with one key limitation: sonar only (no temperature sensor).
Garmin ECHOMAP UHD2 93sv with GT56 Transducer, 9" Touchscreen Chartplotter, Garmin Navionics+ U.S. Inland
The Garmin ECHOMAP UHD2 93sv is a 9-inch touchscreen marine chartplotter designed for anglers who want clear structure and navigation in one unit. It includes a GT56 transducer for Garmin traditional plus ClearVü and SideVü scanning sonar, comes with built-in Navionics+ inland mapping, and supports Wi‑Fi sharing and multi-band GPS for improved positioning. The main caveat is that it’s a more involved system purchase if you are not planning to use sonar scanning features and Garmin ecosystem integrations.
Simrad GO Chartplotter and Fish Finder, with Transducer and Radar Options, Preloaded C-MAP Discover Chart Card
The Simrad GO9 XSE bundles a 9-inch chartplotter plus sonar support (with included HDI transducer) and plug-and-play radar compatibility, along with a preloaded C-MAP Discover chart card. Review themes highlight a bright, easy-to-learn touchscreen interface and strong chart readability, with one notable setup caveat around getting side scan imaging to work as expected.