for White iPad 6 2018 6th Generation A1893 A1954 Touch review
Quick take
This iPad 6th Gen (2018) 9.7-inch digitizer glass replacement kit is made for the A1893 and A1954 models and includes a pre-assembled touch screen with adhesive, plus repair tools and a spare home button. It can be a straightforward DIY swap if you’re comfortable following an iPad screen replacement workflow, but buyers note that the lack of product-specific instructions and careful adhesive handling are the main friction points.
Pros and cons
Pros
- Designed for iPad 6th Gen (2018) 9.7-inch, compatible with A1893 and A1954 (check your model number first).
- Includes a complete digitizer assembly with home button, camera bracket, and pre-installed adhesive.
- Includes an in-box tool kit to help with a DIY installation.
- Home button replacement is included, but only supports standard button functions (use your original for Touch ID).
Cons
- No instructions are included, so you’ll likely need an online video or repair guidance.
- Installation depends on getting the adhesive placement and glass protection steps right, which can be frustrating.
- LCD screen is not included, so this is not a full screen replacement if you also need the LCD.
- Some buyers report receiving a non-responsive replacement after installation, so testing before committing matters.
What buyers think
Buyer feedback is broadly split between “works as expected” experiences and frustration around the install process. Many shoppers say the digitizer was responsive after installation and that watching a YouTube repair video made the workflow easier. The included tools appear to help, and the kit’s pre-installed adhesive and assembly are commonly described as making the swap manageable.
That said, buyer-review evidence also highlights two recurring pain points: confusion about adhesive and protective layers during assembly, and the importance of careful handling. One installation-related report mentions a non-responsive screen after replacement and a difficult resolution because the issue was outside the return window. Overall, buyer-review evidence suggests the part can deliver solid results, but DIY success is highly dependent on following the step-by-step process closely.
What this replacement actually is
This is a digitizer glass replacement assembly for the iPad 6th Gen (2018) 9.7-inch models that use A1893 and A1954. It is intended to fix common issues like a cracked touch glass or an unresponsive touch panel.
Important limitation: the LCD screen is not included. If your display problems are not limited to the touch surface, you may need a different repair path than just swapping a digitizer.
Compatibility and model number check
Compatibility is restricted to the iPad 6th Gen (2018) 9.7-inch with model numbers A1893 (Wi-Fi) and A1954 (Wi-Fi + cellular variants). Before buying, verify the model number printed on the back of your iPad. If your iPad is a different generation or uses a different model number, this kit will not be the right fit.
What’s included in the kit
- Touch screen digitizer assembly for the iPad 6th Gen (2018) 9.7-inch, with the home button and camera bracket integrated.
- Pre-installed adhesive to help you complete the reassembly without sourcing your own adhesive.
- Spare new home button included.
- Tool repair kit including a small Phillips screwdriver, battery isolation tool, metal knife opener, plastic pry bar, suction cup, cleaning cloth, plus open-shell fragments.
Home button and Touch ID tradeoff
If you rely on Touch ID, plan carefully. The included note indicates the new home button does not support Touch ID, and it only supports ordinary button functions. To keep Touch ID capability, you may need to use your original home button if it is still in good condition.
Installation difficulty and where buyers get stuck
This kit is marketed for DIY replacement using the included tools, but buyers emphasize that it’s not a “no effort” job. Reviews commonly point to online video walkthroughs as the practical way to learn the exact order of steps.
Two recurring installation themes show up in feedback:
- Adhesive and protective layer clarity: some buyers found it hard to identify the exact adhesive stripes and cover layers during reassembly.
- Handling and testing: because the process involves separating components and re-securing the assembly, you should avoid fully committing the adhesive until you’ve confirmed the digitizer is working.
Pros and cons for different iPad owners
Best for
- Owners of an iPad 6th Gen (2018) 9.7-inch who need a digitizer glass repair and confirmed they have A1893/A1954.
- DIY repairers who are comfortable using online video guidance and following careful reassembly steps.
- Shoppers who want a kit that includes tools and pre-installed adhesive, rather than sourcing everything separately.
Who should avoid it
- If your issue is not limited to the touch surface (since the LCD screen is not included).
- If you prefer a repair kit with clear product-specific instructions in the box.
- If you are not comfortable working around delicate internal parts and adhesive placement.
Price and availability
The price shown for this part is in the low-$20 range at the time of this write-up, with a listed compare-at price higher than that. Availability is described as in stock. If you’re comparing options, the most cost-effective choice is the one that matches your exact iPad model and addresses your display issue type (touch digitizer vs full LCD replacement).
Verdict
This digitizer assembly replacement is a good fit for iPad 6th Gen (2018) 9.7-inch owners with A1893/A1954 who want a complete touch glass kit with pre-installed adhesive and a tool set. The main caveat is that DIY success depends on following the correct adhesive and assembly steps, and Touch ID may require using your original home button. If you’re prepared for a careful repair workflow, it’s a practical option for bringing a cracked or unresponsive touch iPad back to usable condition.
FAQs
Does this digitizer include the LCD screen?
No. This is a digitizer glass replacement kit, and the LCD screen is not included.
Is it compatible with all iPads?
It’s only compatible with iPad 6th Gen (2018) 9.7-inch models A1893 and A1954. Check the model number on the back of your iPad before purchasing.
Will the included home button support Touch ID?
The included home button does not support Touch ID. If you want to keep Touch ID working, you may need to reuse your original home button if it’s in good condition.
Are instructions included for installation?
No. The kit does not include installation instructions, so you’ll likely want an online video walkthrough or professional help.
Should I test the screen before sealing it with adhesive?
Yes. The kit guidance recommends testing before gluing, so you can confirm the touch digitizer is working before final adhesion.
Is it worth buying if I’ve never replaced an iPad screen before?
If you’ve never done this kind of repair, it’s still possible, but the job can be finicky due to adhesive placement and disassembly steps. If you’re unsure, a professional technician may reduce the risk of wasted time.
Ready to compare current options? Buy on Amazon
Specifications
| Product Title | for White iPad 6 2018 6th Generation A1893 A1954 Touch Screen Digitizer Assembly Replacement with Home Button,Camera Bracket,Pre-Installed Adhesive,Tool Repair Kit |
|---|---|
| Category | Electronics > Computers & Accessories > Tablet Replacement Parts > Digitizers |
| Brand | Zentop |
| Manufacturer | Zentop |
| Item Weight | 7 ounces |
| Product Dimensions | 11.02 x 8.27 x 0.71 inches |
| Color | White |
| Item model number | I P2018 |
| Item Dimensions LxWxH | 11.02 x 8.27 x 0.71 inches |
Recommended next
for iPad 7/8 (7th 8th Gen) Screen Replacement Digitizer Touch Glass 10.2" for A2197/A2198/A2200/A2270/A2428/A2429/A2430
A DIY front-panel digitizer replacement kit for iPad 7th and 8th gen (10.2-inch) that swaps out the touch glass and digitizer, not the LCD. It comes with a home button and a full set of tools, making it a practical option if your iPad’s touch is cracked, unresponsive, or showing touch issues, with the main caveat being that repairs are delicate and model-matching matters.
JPUNG Screen Replacement for iPad 6 (6th Gen 2018 Released) Digitizer 9.7" (A1893/A1954) with Home Button + Repair Kit
A bundled glass touch screen digitizer replacement for the 2018 iPad 6 (A1893/A1954), designed for DIY repairs. It includes the home button flex and a full tool kit, but buyers should plan for careful disassembly, proper connector handling, and stronger-than-expected adhesion prep to avoid edge lifting or touch dead zones.
for iPad 7 7th / 8 8th Gen Screen Replacement Digitizer 2019/2020 10.2 Inch Touch Glass (Home Button, Repair Kit, White)
This iPad 7th/8th gen front digitizer replacement is designed for repairs when the touch glass is shattered. It’s made for specific model numbers (A2197/A2198/A2200 and A2270/A2428/A2429/A2430), includes a DIY tool kit, and comes with an important limitation: the included home button does not support Touch ID, so saving your original home button may be the safer route. A good budget option for confident DIYers, not an ideal pick for first-time repairs who want guaranteed button functionality.
Zentop for Black iPad Air 1st Generation Touch Screen Digitizer Glass Replacement (A1474/A1475/A1476)
This all-in-one digitizer replacement kit restores touch functionality and the screen glass for select iPad Air 1st Generation models (A1474/A1475/A1476). It includes a complete digitizer assembly with preinstalled adhesive and a basic repair toolkit, but the LCD is not included and installation guidance is limited to online videos.