for iPad 7 7th Generation/8 8th Generation Screen Replacement Touch Digitizer Glass 10.2" 2019/2020

What buyers think

Buyer-review evidence is mixed, but a few recurring themes show up. Several shoppers describe the kit as workable for DIY repairs and appreciate that the digitizer connections are already attached, which can simplify assembly. Others highlight that the included tools cover what they needed. At the same time, there is at least one report of the home button failing after a short period, suggesting durability can be a concern depending on how the repair is done and how well the part aligns with the device.

What this replacement part is (and is not)

This is a touch digitizer glass replacement for the iPad 7th generation (2019) and iPad 8th generation (2020) 10.2-inch models listed for compatibility. It is intended to restore the touch/glass functionality when the digitizer layer is damaged.

Important limitation: the LCD is not included. If your display is also broken (for example, lines, discoloration, or a non-working panel), you will likely need a different kind of screen replacement that includes the display.

Compatibility and model number checklist

To avoid buying the wrong part, confirm your iPad model number before ordering. This kit is listed for iPad 7th/8th generation models including:

• A2197
• A2198
• A2200
• A2430

If your model number does not match, do not assume fit, because digitizer and connector layouts can vary across iPad variants.

Included in the kit

You get the digitizer glass complete full assembly for the targeted iPad versions, along with a spare new home button and an included tool kit. Adhesive is preinstalled on the replacement assembly, which helps streamline the process.

The tool kit is described as including items such as a small screwdriver, battery isolation tool, metal knife opener, plastic pry bar, suction cup, and a cleaning cloth.

Home button and Touch ID: the key tradeoff

This kit includes a spare home button, but the included replacement button does not support Touch ID. The more practical path is to reuse your original home button if it is in good condition, so Touch ID functionality can be retained.

If you expect Touch ID to keep working and your current button is functional, plan your repair accordingly. If your current button is already damaged, you may need to accept that Touch ID support may not carry over with the included button.

Installation reality check (what to expect)

Installation guides are not included, but you can find online video installation resources. Buyers also commonly note that the hardest part is removing the old screen, not necessarily installing the new digitizer.

Also, the product guidance emphasizes testing the replacement before final gluing. That step matters because parts damaged during installation are not accepted for return.

Pros and cons summary for buyers

Who this is a good fit for

• You have an iPad 7th or 8th generation 10.2-inch with a damaged touch/glass digitizer and a compatible model number.
• You want an at-home repair kit that includes tools and a complete digitizer assembly.
• Your current home button is working, and you plan to reuse it if you want Touch ID to continue functioning.

Who should avoid it

• Your iPad’s LCD/display is damaged, since this kit explicitly does not include the LCD.
• You need Touch ID to work and your original home button is not usable, because the provided replacement button is described as not supporting Touch ID.
• You want step-by-step printed instructions, since guidance is primarily video-based.

Is it worth it?

It can be worth it if your problem is specifically the touch digitizer glass layer and you have the right iPad model. The included tools and preinstalled adhesive are practical for DIY work, and multiple buyers report successful installs. However, the lack of an LCD and the Touch ID limitation on the replacement button are the two biggest reasons shoppers end up dissatisfied, especially if they assume this is a full screen swap.

If you are unsure whether your issue is touch-only versus a full display problem, it’s worth diagnosing that first. A quick decision point: if the screen looks fine but touch is dead or erratic, a digitizer-focused kit like this is more likely to match your needs.

Buy on Amazon

FAQ

Will this include the LCD screen?

No. This kit is for the touch digitizer glass assembly, and the LCD screen is not included.

Does the included home button support Touch ID?

The included replacement home button does not support Touch ID. If you want Touch ID to keep working, you will likely need to reuse your original home button if it is in good condition.

Which iPad models are compatible?

It is listed for iPad 7th/8th generation 10.2-inch models with model numbers such as A2197, A2198, A2200, and A2430. Check your model number on the back of the device before buying.

Are instructions included?

No. Printed instructions are not included, but you can use online video installation resources.

Is this suitable for first-time iPad screen repairs?

It can be, since the kit comes with tools and the assembly is designed for DIY replacement. However, screen removal can be the most challenging part, so be prepared to take your time and test the part before final installation.

What should I do before gluing the new digitizer in place?

Test the replacement first and confirm it works with your iPad before gluing it down.

Recommended next

Screens $23.99

★★★★★ 4.3/5 2,412 ratings

for iPad 9 (9th Generation) A2602 A2603 A2604 A2605 Screen Replacement Digitizer Touch Glass Kits

A DIY digitizer (touch glass) replacement kit for iPad 9 (10.2-inch, 2021) that includes the touch screen front panel plus key repair tools and a pre-installed home button. It can restore touch functionality when the top glass is shattered, but it does not include an LCD, and transferring a home button to preserve Touch ID can be risky for first-time repairs.

Screens $19.98

★★★★★ 4/5 1,113 ratings

for iPad 7th/8th Generation Screen Replacement Digitizer 10.2"(A2197,A2198,A2200,A2270,A2428,A2429,A2430),for iPad 7/8 Screen Replacement Parts(NO LCD),+Home Button+Pre-Installed+Repair Tools(Black)

This Fixerman 10.2-inch iPad 7th/8th screen replacement digitizer kit is designed for specific 7th-gen and 8th-gen models, and it includes a pre-installed home button plus tools to help you complete the repair. It can be a solid DIY option if you’re comfortable with careful flex-cable work, but it is not a Touch ID home button replacement unless you transfer your original button.

Screens $26.99

★★★★★ 4.4/5 1,388 ratings

for iPad 10 (10th Generation) || iPad (A16) A2696 A2757 A3354 A3355 A2777 Screen Replacement Digitizer Glass Touch Kits, Full Repair Sets, fit iPad 10th Gen (2022) 10.9 Inch || iPad A16 (2025) 11 inch [Without LCD]

This JPUNG glass touch screen replacement kit is designed for specific iPad 10th gen (2022) and iPad A16 (2025) model numbers, and it’s meant for DIY repairs when the digitizer or touch is the issue. The kit includes tools and step-by-step instructions, and many buyers say it’s straightforward and cost-effective, with the main caveats being pencil compatibility and careful installation (including moving small components).

Screens $19.98

★★★★★ 4/5 1,862 ratings

A1893 A1954 Screen Replacement Kit for iPad 6 (6th Gen) Digitizer Touch Glass 6th Generation 9.7 inch 2018, with Home Button Full Repair Tools [Without LCD]

A DIY digitizer (touch) replacement kit for the 2018 iPad 6th gen (9.7-inch, model A1893/A1954). It comes with home button parts and a repair-tool set, but it is not an LCD replacement, and Touch ID support depends on how you transfer the original home button hardware.