FIGEBNY wireless HDMI transmitter and receiver 4K decode 1080P output ultra low latency (2.4G/5G)
Quick take
This FIGEBNY wireless HDMI transceiver kit is designed to replace long HDMI cables for TVs and projectors, with a plug-and-play setup and dual-band wireless (2.4G/5G) to help maintain a stable connection. It’s a strong fit for presentations, classrooms, casual streaming, and everyday screen sharing, but buyers looking specifically for smooth, perfectly synced movie audio may find the timing less consistent. Also note that despite “4K decoding” claims, real-world output can land at 1080p.
Pros and cons
Pros
- Plug-and-play connection, designed to pair the TX and RX quickly without app setup.
- Dual-band 2.4G/5G wireless with automatic channel selection for steadier signal performance.
- Supports common use cases like TV and projector screen mirroring or extended display modes.
- Portable, compact design (about 0.3 lb) that fits behind thin laptops and travel setups.
Cons
- Practical output may be limited to 1080p even when a 4K source is connected.
- Audio/video synchronization may not be ideal for movie playback.
- Not compatible with Blu-ray/DVD players (relevant if that is your primary source device).
What buyers think
Buyer-review evidence is mixed but useful for setting expectations. Several buyers report a reliable connection for gaming or streaming, with a picture appearing quickly after powering on and minimal noticeable lag for their use. Some users mention it works well when connected within a short range, suggesting the wireless link can be dependable in normal home or small room layouts. At the same time, there is enough feedback to flag two recurring buyer concerns: output resolution expectations and timing for video with sound. Another buyer returned the unit due to audio lag that made movie watching disappointing, while still considering it acceptable for non-timing-critical use.
What this is for
This wireless HDMI transmitter and receiver set is meant for situations where running an HDMI cable is inconvenient, whether that is mounting a TV across a room, setting up a projector for a gathering, or keeping a laptop connected without cable clutter. It supports both screen mirroring and an extended display mode, giving you flexibility for meetings and training sessions, as well as for using a projector or display in shared spaces.
Connectivity and setup, in plain terms
The core promise is simple pairing: insert the transmitter (TX) for the source device and the receiver (RX) for the display device, and the devices connect quickly. The kit is designed to avoid complex software or Wi-Fi parameter changes. For more stable power, the TX and RX are intended to be powered using the included USB cables.
You also get multiple physical connection options in the box, including a USB-C to HDMI 4K adapter, plus Micro HDMI and Mini HDMI adapters, and cables for common device ports. That matters if your “source” is not always a standard full-size HDMI laptop, for example a tablet or a camera that uses a smaller HDMI form factor.
Resolution and video quality expectations
The transmitter and receiver are built around 1080p Ultra HD output at up to 60Hz, with support for “true 4K decoding” and “4K decoding” claims. If your main goal is guaranteed 4K wireless output for a 4K display, you should treat 1080p output as the safer expectation.
For most everyday uses, 1080p is still plenty for presentations, slide decks, and casual viewing, especially at typical classroom or living-room distances.
Latency and audio sync, the real buyer decision point
Wireless HDMI is often chosen for convenience, but timing matters depending on what you watch. The product is marketed for ultra low latency, and some buyers describe smooth results for gaming and general streaming. Still, there is enough negative feedback focused specifically on audio/video synchronization to matter if you are watching movies, listening for lip sync, or using it as your main home-theater wireless solution.
If your content is “timing-critical” (films, live performances where sound alignment is noticeable, or serious home theater), consider testing your preferred media type before relying on it for every session. For non-critical content, like web browsing, product demos, or training videos, buyers reported workable performance.
Range and signal stability
The kit uses dual-band wireless (2.4GHz and 5GHz) with automatic channel selection, which is meant to reduce interference and improve connection stability. If you are placing the transmitter and receiver across a larger space, performance may depend on your room layout, walls, and nearby wireless congestion, just like other wireless video extenders.
Compatibility details you should check
- Source device support: computers, smartphones, tablets, and cameras, as long as you can connect via HDMI output (or use the included HDMI adapters for your port type).
- Display device support: TVs, monitors, projectors, and electronic whiteboards.
- Standards: supports HDMI 2.0 and below, and DisplayPort (DP) 1.0, with stated data transmission speed of 14Gbps.
- HDCP handling: if your content uses HDCP 1.2, you may need to follow setup steps for compatibility.
- Not compatible with: Blu-ray/DVD players.
Portability and how it fits on your devices
The transmitter and receiver are compact, intended to be easy to travel with and not overly bulky when connected to thinner laptops. If you frequently switch between home and office or bring a projector setup to events, this form factor can be a practical advantage over larger wireless extenders.
Privacy disconnect feature
A one-touch privacy function is included to quickly disconnect and stop screen sharing. That is particularly relevant for office environments where you may occasionally share confidential dashboards, contracts, or personal information, and want a fast way to stop output.
Pros and cons recap
- Choose it if you want an HDMI cable alternative for screen mirroring or presentations, you value quick setup, and you can live with (or prefer) 1080p output for most content.
- Consider another approach if you need consistent 4K wireless output, or if perfect audio and video sync is a must for movies and home theater.
- Avoid it if you plan to connect Blu-ray/DVD players as your primary HDMI source.
Price and availability
Pricing for this wireless HDMI transmitter and receiver varies by retailer and can change over time. If you are comparing options, focus on the total kit contents, the port adapters included for your specific devices, and whether the resolution and sync behavior match your primary use case.
FAQs
Is this wireless HDMI transmitter 4K or 1080p?
It supports 4K decoding claims, but the designed output is listed as 1080p at 60Hz. Buyer feedback also includes reports that a 4K source still resulted in 1080p output on the receiving display, so 1080p should be your safe expectation.
Does it have low latency for gaming?
Some buyers report good results for gaming and general streaming with minimal noticeable lag for their setup. That said, real-world latency can vary based on wireless conditions and your specific content, so consider your tolerance for delay if you play competitive games.
Will it work with a projector or a monitor?
Yes. The receiver is intended to connect to devices like TVs, monitors, projectors, and electronic whiteboards, as long as they accept HDMI input.
How do you set it up?
The kit is built for plug-and-play use. Power on the transmitter and receiver, insert the appropriate connectors for your source and display devices, and wait for the connection to establish.
Is it compatible with Blu-ray or DVD players?
No, it is not compatible with Blu-ray/DVD players.
Can I disconnect screen sharing quickly?
Yes. There is a one-touch privacy function that disconnects and stops screen sharing immediately.
Does it support screen mirroring and extended display?
Yes. It supports both screen mirroring and extended display modes, which can be useful for different presentation styles.
Is the audio synced properly for movies?
Buyer-review evidence includes a concern about audio lag for movie watching, where dialogue can feel out of sync. If lip sync is important to you, this is the main limitation to consider.
What’s in the box, and do I need extra cables?
The kit includes the wireless transmitter/receiver components, multiple HDMI adapters (including USB-C to HDMI and smaller HDMI adapters), an HDMI cable, and Type-C cables for power. You may not need additional accessories if your devices fit the included port options and support HDMI output.
Specifications
| Product Title | Wireless HDMI Transmitter and Receiver 4K Decode 1080P Output Ultra Low Latency, Plug&Play 2.4G/5G Portable Extender, 165FT HD Display Adapter for TV Box/PC/Laptop/Projector/DV/Camera White |
|---|---|
| Category | Electronics > Television & Video > AV Receivers & Amplifiers |
| Brand | FIGEBNY |
| Manufacturer | FIGEBNY |
| Model Number | S6 |
| Color | white |
| Item Weight | 30 Grams |
| Compatible Devices | Personal Computer, Tablet, Television, cable, iPhone 15, and iPad 10th Gen+ |
| Connector Type | USB Type C |
| Power Plug Type | Type C |
| Smart Home Compatibility | Not Smart Home Compatible |
| Built-In Media | 2 Type-C Cables, HDMI Cable, Micro HDMI Adapter, Mini HDMI Adapte, USB-C to HDMI 4K Adapter |
| Warranty Description | 2 Year Manufacturer |
| Item Dimensions | 2.95 x 1 x 0.43 inches |
| Unit Count | 1.0 Count |
| Number of Items | 1 |
| Item dimensions L x W x H | 2.95 x 1 x 0.43 inches |
Available variants
Color
- white
- grey
- Light Colour
Recommended next
Denon AVR-X3900H 9.4 Channel AV Receiver, 105W Power, Dolby Atmos, DTS:X, AURO-3D & IMAX Enhanced
The Denon AVR-X3900H is a feature-rich 9.4-channel AV receiver built for immersive Dolby Atmos-style home theater, plus HEOS whole-home streaming and modern HDMI video support (4K/120Hz and 8K/60Hz, including Dolby Vision). It’s a strong fit for buyers who want room correction and an expandable surround setup, just be aware that some buyers report UI friction and limitations around Bluetooth source vs. Bluetooth transmitter use.
Wireless HDMI 4 Receivers and Transmitter, Up to 6 RXs, No Hot, Extender
This wireless HDMI kit lets you send one source signal to up to four TVs (expandable to six receivers) without running HDMI cables. It’s designed for plug-and-play setup, supports 1080p@60fps output, and uses dual-band 2.4G/5G transmission for steadier performance through typical home or venue layouts. The main tradeoff to consider is that range can drop when using all four receivers, and there can be a small audio delay depending on your setup.
Wireless HDMI Transmitter and Receiver 4K Decode 1080P Output, HDMI Wireless Extender, Plug & Play, Support 2.4/5GHz for Streaming Video and Audio to Monitor from Laptop/Pc/Tv Box
This wireless HDMI transmitter and receiver kit removes long HDMI runs for presentations and home use. It’s designed for plug-and-play setup (no app, no Wi‑Fi connection required) and supports 1080p/60Hz output with low-latency audio/video for compatible HDMI sources. Biggest caveat: buyer feedback suggests it may be sensitive to distance and connection stability in some setups, and it needs power via the included USB connections.
Pyle 8-Channel Wireless Bluetooth Power Amplifier - PT8050CH
The Pyle PT8050CH is an 8-channel, rack-mount-style Bluetooth amplifier built for multi-room or multi-speaker setups, with support for RCA, mic, AUX, USB, and SD playback. Reviews commonly highlight easy setup and strong, clear sound for its class, but some buyers note limited bass control, possible switching delays, and mixed long-term reliability.